• Always mount
this unit
un safe and stable matter.
• Power-supply cords should be routedso thatthey are not likely to be walked on or pinched by items
placed upon or against them, paying particular attentionto the pointthey exit from the unit.
• Cleaning unit
should be cleaned only as recommended
by the manufacturer.
• Heat —The
appliance should be situatedaway from heat sources such as radiators,
heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
• The unit should be serviced by qualified service personnel when:
A. The power-supply
cord or theplug has been damaged.
B. Objects have fallen,or liquidhas been spilled into
the appliance.
C. The appliance has been exposed to rainorwaten
D. The appliance does notappear to operate normallyor exhibits s marked change in performance.
Operating Instructions
Operating Modes:You can use the unitin4 ways:
Auto Mode-The unitwill automatically
chase throughthe different
colors.
Sound-Active mode—The
unitwill react to sound, chasing throughthe built-inprograms.
DMX control mode —
This function
will allow you to controleach individual units traits with a
standardDMX 512 controller.
e Master-slave mode— One unitwillwork as the masterin the one of the above three modes, other
units in the chain will work in synchronization towards the master.
DMX Mode: Operating throuéha DMX.controller
give the;
user the freedomto create their own
Programs tailoredto theirown individual needs. This functionalso allows you to use your units as spot
lights.
I. This function will allow you to control each individualunit's traits with a standard DMX 512
controller.
2. The LED unit uses 7 DMX channels to operate.Please see "DMXValues and Functions"for the
DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connectionsto any standard DMX
controller.Set your desired DMX address followingthe setup specificationsthat come withyour
DMX controller.
LED Operation Menu: LED screen with
fourtouchbuttons:MENU, UP, DOWN and ENTER.
1
.Press MENU may select thefunction
youwant. 0
2.Press UP or DOWN may adjust the values.
3.ENTER is confirmationbutton,press ENTER will save the MENU UP DOWN ENTER
setting you want.
