www.einstruction.com
Copyright© 2009 eInstruction Corp.
All other products and company names are the trademarks or registered trademarks of their respective owners.
The information contained in this document is subject to change without notice. eInstruction assumes no responsibility for
technical, or editorial errors, or omissions that may appear in this document, or for the use of this material. Nor does eIn-
struction make any commitment to update the information contained in this document. This document contains proprietary
information which is protected by copyright. All rights reserved. No part of this document can be photocopied or reproduced
in any form without the prior, written consent of eInstruction.
Corporate Headquarters
308 N Carroll Blvd
Denton, Texas 76201
Tel: 888.707.6819
Fax: 940.565.0959
Western Office
14400 N 87th St., Ste. 250
Scottsdale, Arizona 85260
Tel: 480.948.6540
Support: 480.443.2214
Fax: 480.948.5508
European Headquarters
eInstruction EMEA
Centre Education EMEA
26/36 rue Alfred Nobel
93600 Aulnay Sous Bois
France
Tel: +33 1.58.31.10.60
Support: +33 1.58.31.10.65
Fax: +33 1.58.31.10.69
Patents
CPS Pulse will use proprietary technology covered by the following US patent No.:
7,277,671, 6,665,000, 6,021,119, 5,724,357, Re. 35,449, 5,379,213, 7,599,703,
European Patent No.: EP 1 427 228 b1, EP 1 337 127 b1, EP 0 697 773 b1, EP 1 478
099 b1 and other US and foreign patents and patents pending.
1.1 Declaration of Conformity
This device complies with the following European Directives and USA/Canada Regulations:
Ø Directive 1999/5/EC on radio equipment and telecommunication terminal equipment
and the mutual recognition of their conformity
Ø Directive 2006/95/EC on the harmonization of laws of member states related to electri-
cal equipment designed for use within certain voltage limits
Ø The USA Federal Communications Commission (FCC) Rules and Regulations
Ø Industry Canada Rules and Regulations
This device complies with the following national and international standards:
Ø EN 301 489-1 V1.6.1:2005: EMR; EMC standard for radio equipment and services. Part
1: Common technical requirements.
Ø EN 301 489-17 V1.2.1:2002: EMR; EMC standard for radio equipment and services.
Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high
performance RLAN equipment.
Ø EN 300 328 V1.7.1: Electromagnetic compatibility and Radio spectrum Matters (ERM):
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques.
Ø EN 60950-1: 2001 + A11: 2004: Information technology equipment – Safety. Part 1:
General requirements
Ø FCC Part 15B, 15.247: 10-01-2006: Radio Frequency devices: Operation within the
bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz.
Ø IC RSS-210 Issue 7: 2007: Low power license-except radio-communications devices (all
frequency bands): Category 1 equipment.
Environmental Regulations
The European Union has forced stringent requirements on manufacturers to limit the
contents of lead and other chemicals in electronic assemblies. Other international and US
states are considering similar rules. This system will comply with RoHS and WEEE and will
require further analysis regarding other regulations.
For international sales, the dealer responsible for placing it on the market in
Europe is responsible for contracting for battery and other component disposal
at the product end of life up front at the time of sale.
Scottsdale, Arizona, U.S.A. 7.8.2009 Tom Grinter
Location Date Dir of Engineering
1.2 FCC/IC Compliance
This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada
Rules. Operation is subject to the following two conditions: (1) this device may not cause
interference and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. The user is cautioned that changes or modifica-
tions to the device that are not approved by the manufacturer could void user’s authority to
operate the device.
1.3 EU Compliance
This device is a 2.4 GHz low power response system intended for residential and commercial
use in all EU and EFTA member states.
Notice
The base and keypad units may be susceptible to Electrostatic Discharge (ESD) and other
similar fast transient events causing system interruption. Should system interruption occur,
reboot computer, reset base unit by disconnecting and reconnecting USB cable and push any
key on keypads which have powered down.
36-01520/37-01314-01 Rev. C
Are you interested in learning more about what CPS can do
for your classroom? We offer free online training resources
for you. Enter the following link into your browser to find
training videos and Quick Step guides that you can download:
http://www.einstruction.com/support_downloads/training/
resources/index.html
Or, contact Professional Services directly:
Training
