POWER
1. Use only standardized adapters wrien in the manual.
Incorrect cower source can cre,
electric shock, or failure.
2. If there is smoke or a strange smell from the power
source, disconnect the power immediately and contact
the serice center orpurchasingoce. If you conto
use it as it is, it can cre and electric shock.
3. connect the power plug from the outlet before
cto the power terminal block.
INSTALLATION
1. Install it according to the temperature and humidity enronment
suitable for the product speccatherwise, it can cause
re and electric shock.
2. Thunder and lightning can cause problems with the camera.
When installing, be careful to minimize damage caused by
lightningsuch as grounding.
3. ce materials (driers, coins, metal
sks, etc.) and water-containers on the camera. It
causes injuries caused bre, electric shock, and falling.
4. If you want to moe the installed product, turn o
power and moe it or reinstrwise, it can cause
re and electric shock.
5. tinstall itin places where there is alotof moisture,
dust, soot, etc. It care and electric shock
.
6. Aoid places where direct sunlight comes in or where heat
comes out, such as heagappliances. It causere and electric
shock.
CLEANING
1. ray water directly on each part of the product
when cleaning. It cre and electric shock.
POWER
1. Use the power line aergitrmly to the power connec
terminal. Incomplete conneccan causere.
2. extend the adapter output cable. If you need to
install the power cable extension, please contact the
sernter.
3. Use insulated power for PoE connected external power.
INSTALLATION
1. It is recommended not to touch the lens when installing
the product as the factory ships with a focus adjustment
completed during the manufacturing comple
2. Aoid installing cameras facing bright lights like sunlight.
Causes damage to the image sensor.
3. ke sure it safe and securely when installing camera on
the wall or ceilling. This can cause injury by the fall.
4. ccameras to one adapter. Excess
capacity causes abnormal heare.
5. Wear prote gloes when installing/uninstalling the
camera. This causes burns caused by high temperature
on the surface of the product.
6. rop or shock the product. Please stay away from
places wherraeere or magnet types are
present.
7. Install it in a well-enated place. This can cre and
failure.
CLEANING
1. Wipe the contaminated surfry
cloth or wery cloth to preent water from
owing, then wipe the contaminated area.
Safety Instruction
Theseinstrucare intended to ensure that the user can use the product correctly to aoid danger orproperty loss.
If the product is notfuncgproperly ordamaged, contact the serice center orpurchasingoce.
Warnings
Serious injury or death may be caused
if any of these warnings are neglected.
Cautions
Injury or equipment damage may be caused
if any of these cautions are eglected.
