4
LOCATION OF DATA PLATE
The data plate is located on the side panel.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
Equipment should be examined for damage before and during unloading. The freight carrier has
assumed responsibility for its safe transit and delivery. If equipment is received damaged, either
apparent or concealed, a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the me of delivery. It must then be
signed by the carrier representave (Driver). If this is not done, the carrier may refuse the claim. The
carrier can supply the necessary forms.
B) If concealed damage or loss is not apparent unl aer equipment is uncrated, a request for
inspecon must be made to the carrier within 15 days. The carrier should arrange an inspecon. Be
certain to hold all contents and packaging material.
Installaon should be performed by a qualified installer who thoroughly read, understands and
follows these instrucon.
If you have quesons concerning the installaon, operaon, maintenance or service of this product,
visit Cooking Performance Group’s website at www.CookingPerformanceGroup.com.
SAFETY PRECAUTIONS
DANGER This symbol warns of imminent hazard which will result in serious injury or
death.
WARNING: This symbol refers to a potenal hazard or unsafe pracce, which could result
in serious injury or death.
CAUTION: This symbol refers to a potenal hazard or unsafe pracce, which could result
in minor or moderate injury or product or property damage.
NOTICE: This symbol refers to informaon that needs special aenon or must be fully
understood even though not dangerous.
NOTICE: This product is intended for commercial use only. Not for household use.
NOTICE: Local codes regarding installaon vary greatly from one area to another. The Naonal
Fire Protecon Associaon, Inc., states in its NFPA96 latest edion that local codes are
“Authority Having Jurisdicon” when it comes to requirement for installaon of
equipment. Therefore, installaon should comply with all local codes.
