Cornelius ED250 PRO GATE Caractéristiques techniques

Table des matières

Autres manuels Cornelius Machine à glaçons

Cornelius

Cornelius FlavorFusion P/N 629088673 Manuel utilisateur

Cornelius

Cornelius Enduro 200 Manuel utilisateur

Cornelius

Cornelius Xtreme 322 Series Manuel utilisateur

Cornelius

Cornelius REMCOR TJ400 Manuel utilisateur

Cornelius

Cornelius UC150 ICE ONLY Manuel utilisateur

Cornelius

Cornelius IMD300-15A Manuel utilisateur

Cornelius

Cornelius The Profile PR150 BC Manuel utilisateur

Cornelius

Cornelius IACSSO Manuel utilisateur

Cornelius

Cornelius CCM CCU Manuel d'installation et d'exploitation

Cornelius

Cornelius 500 - Series Manuel utilisateur

Cornelius

Cornelius I Series Guide d'installation

Cornelius

Cornelius XTREME 631812001 Guide de configuration

Cornelius

Cornelius D-45 Manuel utilisateur

Cornelius

Cornelius IMD GLACIER 500-30 Manuel utilisateur

Cornelius

Cornelius Nordic CCM1448 Mode d’emploi

Cornelius

Cornelius D90 Manuel utilisateur

Cornelius

Cornelius ED150 "K" Style Lid Kit Manuel utilisateur

Cornelius

Cornelius NORDIC ELITE Series Manuel utilisateur

Cornelius

Cornelius Nordic Black/Gray Style Lid CCM522 Manuel utilisateur

Cornelius

Cornelius UC 700 Series Supplément

Cornelius

Cornelius XTREME 631805001 Guide de configuration

Cornelius

Cornelius ED-300 Manuel utilisateur

Cornelius

Cornelius CONTINUOUS FLOW ICEMAKER 1400R Manuel utilisateur

Cornelius

Cornelius Enduro-300 IntelliCarb Manuel utilisateur

Manuels Machine à glaçons populaires d'autres marques

Hoshizaki

Hoshizaki KMD-460MWJ Manuel utilisateur

Sub-Zero

Sub-Zero 315I Instructions d'utilisation

Unold

Unold 48945 Manuel utilisateur

Kenmore

Kenmore 2217402A Manuel utilisateur

GE

GE XPIO43SCSS Manuel utilisateur

Hoshizaki

Hoshizaki KMD-901MAH Manuel utilisateur

Whynter

Whynter FIM-450HA Manuel utilisateur

U-Line

U-Line UMCR014-SC01A Manuel d'installation

Andrew James

Andrew James AJ000522 Manuel utilisateur

Scotsman

Scotsman CME1356 Manuel utilisateur

Scotsman

Scotsman ACM 25 Manuel utilisateur

Kärcher

Kärcher IP 120 Manuel utilisateur

U-Line

U-Line SS1095 Manuel utilisateur

Maytag

Maytag MIM1554WRS - Ice Maker Manuel utilisateur

Hoshizaki

Hoshizaki KM-630MAH Manuel utilisateur

Princess

Princess Yonanas Manuel utilisateur

Unold

Unold 48946 Manuel utilisateur

Electrolux

Electrolux E15IM60GP Manuel utilisateur

®

Publication Number: TP01054PMC - 1 - Rev. 02/03

Copyright © 2003 www.cornelius.com

Cleanliness/Facility and Equipment Maintenance

ED250 PRO GATE - Cleaning Procedures

Supplies Equipment Needed

• Two-compartment Pail

• Two Clean Sponges or towels

Products Needed

Damon Procter & Gamble

D.C. Cleaner Professional Strength Dawn

Ster-O-Kem Clean Quick Liquid Quaternary Sanitizer

WARNING: DISCONNECT POWER BEFORE CLEANING! DO NOT USE METAL SCRAPERS,

SHARP OBJECTS OR ABRASIVES ON THE ICE STORAGE HOPPER, TOP COVER,

AND THE AGITATOR DISK, AS DAMAGE MAY RESULT. DO NOT USE SOLVENTS

OR OTHER CLEANING AGENTS, AS THEY MAY ATTACK THE PLASTIC METAL.

Daily CLEAN EXTERIOR SURFACES

Step Action

1. Remove the cup rest from the drip tray and remove any foreign material.

2. Wash the drip tray with cleaning solution. Rinse drip tray with clean water and allow the solu-

tion to run down the drain.

3. Check the drip tray for proper drainage.

4. Wash the cup rest with cleaning solution and rinse in clean water. Install the cup rest in the

drip tray.

5. Clean all exterior surfaces of the Unit with the cleaning solution, then rinse with clean water

and dry with paper towels or clean cloths.

Daily CLEAN AND SANITIZE BEVERAGE DIFFUSER

Step Action

1. Remove the nozzle from the dispenser by turning and pulling down.

2. Remove the diffuser from the valve by pulling down. Place the nozzle and diffuser in the San-

itizer Solution.

3. Wipe inside the diffuser area using a sanitized cloth and the nylon nozzle brush.

4. Clean the diffuser and nozzle using the nylon nozzle brush. Rinse with lukewarm water.

5. Reinstall the diffuser and nozzle. Ensure they are located correctly in the machine.

®

Cleanliness/Facility and Equipment Maintenance

Rev. 02/03 - 2 - Publication Number: TP01054PMC

www.cornelius.com Copyright © 2003

Monthly CLEANING AND SANITIZING INTERIOR SURFACES

Step Action

1. Remove all of the ice from the hopper.

2. Remove the agitator retainer and the ice agitator assembly.

3. Using the cleaning solution and the nylon brush or sponge, clean the interior of the hopper, top

cover and agitator assembly. Thoroughly rinse the hopper, cover, and agitator assembly with

clean potable water. Note: when pouring liquid into the hopper do exceed the rate of 1/2

gallon per minute.

4. Reinstall the agitator assembly. Take special care to ensure that the retainer is tight.

5. Using the spray bottle filled with sanitizing solution, spray the entire interior of the hopper and

the agitator assembly. Allow to air dry.

6. Remove the ice chute (snap fit) by spreading the sides apart slightly to disengage the tabs in

the cover from the ice chute and sliding down to remove the cover. The ice chute (rear half)

are now exposed for cleaning.

7. Remove the black plastic access cover for the air cylinder from the splash panel.

8. Using the cleaning solution and the nylon brush or sponge, clean the ice chute cover, ice chute

(rear half), ice gate, and air cylinder access cover and rinse thoroughly to remove all traces of

the cleaning solution.

9. Using the spray bottle filled with sanitizing solution, spray these parts with sanitizer. Allow to

air dry.

10. Reassemble the air cylinder access cover and ice chute.