Core Insight 310 Manuel utilisateur
1 2
Model 310/310A(S)/3110(S)
(Auto-Balanced Ionization System)
CORE INSIGHT, INC.
Ionizing Blower User Manual
2
CORE INSIGHT, INC.
Precautions
1. Features and Descriptions
1-1. Features
1-2. Descriptions
2. Installation
2-1. Basics Installation
2-2. Inside or Outside of Process Tool
2-3. Recommended Installation Guideline
2-4. Power Connection
3. FMS Connection
3-1. Interface Terminal Connection
3-2. Interface Terminal Cablin
4. Maintenance
4-1. Filter Cover Attach and Release
4-2. Emitter Point Cleaning
4-3. Filter Cover Cleaning
4-4. Emitter Replacement
5. Ionizer Status
5-1. LED
5-2. Audio Alarm
6. Specification
7. Performance
8. Dimensions
9. Warranty
10. Precautions and Technical Support
03
04
06
07
07
09
0 9
10
10
11
12
Contents
Ionizing Blower Maunal
3 4
Precautions
User must be read this user manual prior to install and using in work environment.
Please keep this document in proper place whenever needs to review it and get guidance.
Manufacturer is not responsible for improper installation, miss application such as explosive environment.
○ Warning
Serious problems could happen if users do not follow described as follows ;
- This product has designed and manufactures for electronics industry applications and generate high voltage,
do not open and modify it. Manufacturer should not take any responsibility for these cases.
- Do not use this product in explosive environments such as flammable, ignition and powders.
- Do not touch at any case when powered on this product or during activated by your hands, clothing or
metal tools. In case of maintenance, user must properly power off and access to cleaning.
- Do not allow to any liquid to product. After cleaning emitter points, user must be completely dry it out and
power on to use it.
○ Warning
Serious injury or loss property could happen if users do not follow described as follows ;
- This product designed electronics industry applications. Do not use this for other purpose.
- User must understand how to use this product by this document or advice from supplier. Without this, user
can have experiences like electrical shock or damage to this product.
- If there are any damages on power cable, communication cable, replace these first and try to use this
product. For more detail cable connection, see following user guide. In case of improper cabling, may cause
of product damage.
- Do not drop or any external forces to product.
- When installation, make it firm and not allow to easy movement in place.
○ Warning
Injury or loss of property could happen if users do not follow described as follows ;
- Emitter point may damage when user touch it with hard material. In case of emitter point damage, this can
cause of whole system degrade.
- This is product generate ozone along with ions, if any user smell ozone, please refresh air in working
environment.
- Be aware of proper safety handling procedure when use this product.
4
1. Features and Descriptions
1-1. Features
Ionizer - Model 310/ 310A(S)/ 3110(S)
- Power Adapter
Model 310/ 310A(S) Model 3110(S)
Desktop Type: 24V DC, 2.5A, Power Length: 1m Wall-Mount Type: 24V DC, 1A
1-2. Descriptions
Model 310
1 2 3
5
46 7 8
POWER IN
24V DC
FMS
1 2 3 4 5
24V DC
+_
Model 310 Model 310A(S) Model 3110(S)
Ionizing Blower Maunal
5 6
Model 310A(S)
Model 3110(S)
Operation LED
Green LED indicates when ionizers working properly and normal condition
Alarm LED
Red LED will indicates when ionizers are in abnormal or out of control status
ON/OFF Switch
Power ON/OFF Switch
Stand
There are wide service hole to fit and installation of this ionizer
Knob
Target adjustable knob will hold ionizer focusing
Input Power Connector
Plug power adapter
1
2
3
4
1 2 3
5
5
4
4
9
9
10
11
11 12
6 7 8
1 2
13 14 6
5
6
POWER IN
24V DC
FMS
1 2 3 4 5
24V DC
+_
POWER IN
24V DC
FMS
1 2 3 4 5 6
24V DC
+
7 8
6
FMS (Facility Monitoring System)
FMS will allow to monitoring status of ionizers and alarm connection
DC Power Terminal
24V DC power connects from process tool when possible
Top LED (310A(S), 3110(S) Series)
Green LED indicates when ionizers working properly and normal condition same as section 1.
High flashing LED will allow to indicates from long distance
For Model 3110(S), single LED activates in two colors, Greed and Red.
Top LED (310A(S), 3110(S) Series)
Red LED will indicate when ionizers are in abnormal or out of control status same as section 2.
High flashing LED will allow to indicates from long distance
Filter Cover (310A(S), 3110(S) Series)
Easy filter cover release design
Filter Cover Holding Pin (3110(S) Series)
Holding filter covers with enclosure
Power Cable Holding Fixture (3110(S) Series)
Cable holding in fixture and not allow abnormal unplugging
Power Switch (3110(S) Series)
Power ON/OFF and Air Flow adjustable Switch (Left: High, Middle: Off, Right: Low)
2. Installation
2-1. Basics Installation
Using stand and put in planar workbench or desktop
2-2. Inside or Outside of Process Tool
If users want to place this ionizer not in planar place, fit with it using wide hole of stand and screws
2-3. Recommended Installation Guideline
Place the ionizer at an appropriate distance from the ESD sensitive items or area.
The ionizer can be free-standing or can be mounted on the workstation or another supporting structure.
The ionizer mounts easily using the attached bracket or stand.
With the unit in place, focus it toward the work area or item to be neutralized.
2-4. Power Connection
Connect properly grounded 100-240V AC power cord to 24V DC adapter
In case of 24V DC connection, connect it through power terminal described above 1-2.
7
8
9
10
11
12
13
14
8
Ionizing Blower Maunal
7 8
3. FMS Connection
3-1 . Interface Terminal Connection
Model 310/ 310A(S)
Model 3110(S)
3-2. Interface Terminal Cabling
4. Maintenance
Must be power off for regular maintenance or emitter cleaning
4-1. Filter Cover Attach and Release
(Model 310A(S) / Model 3110(S) Series has filter covers. Model 310 have no this and open rear cover for
maintenance.
Filter cover allows very fast and easy maintenance.
Pin No. Description
FMS 1 Alarm relay output
FMS 2 Relay common
FMS 3 Normal relay output
FMS 4 Current output for each operation
FMS 5 Current output reference ground
Facility Monitoring System Output Signals
Condition FMS 1~2 FMS 2~3 FMS 4~5
Normal state Open Closed 4 ~ 5mA
Alarm State Closed Open 17 ~ 20mA
No Power Closed Open 0mA
Pin No. Description
FMS 1 Alarm relay output
FMS 2 Relay common
FMS 3 Balance Alarm relay output
FMS 4 Current output for each operation
FMS 5 Current output reference ground
FMS 6 Balance Relay common
Facility Monitoring System Output Signals
Conditions FMS 1~2 FMS 4~5 FMS 3~6
Normal OPEN 4 ~ 5mA OPEN
Alarm CLOSED 17 ~ 20mA CLOSED
Power OFF CLOSED 0mA CLOSED
8
Model 310A(S)
Press filter cover slightly side by side and release or attach it on main enclosure
(※ Make sure this must be done when power off)
Model 3110(S)
Press filter cover topside and release or attach it on main enclosure
4-2. Emitter Point Cleaning
After completely removed filter cover or rear panel from main enclosure, cleaning emitter points using with DI
water and IPA mixture capsule cleaner or cotton stick. After cleaning, make sure all liquid should dry out and
turn ionizer power on.
4-3. Filter Cover Cleaning
For Model 3110(S), it automatically shut down power, but Model 310A(S) does not.
Find proper place to cleaning worktable not in operating area or place. If you open this filter cover, this may
cause of contamination issue for ESDS items and electronic products. After release filter cover, user can wash
it with water or compressed air. If users clean it with water, must be dried before use it. If there is any damage
on filter cover, recommend replace it new one.
Model 310A(S) Filter Cover Model 3110 Filter Cover
Ionizing Blower Maunal
9 10
4-4. Emitter Replacement
Cleaning emitter points are varying based on operating environment. Recommended cleaning cycle will be
once in a month or every quarter. Emitter point life cycles are also varying based on operating environment
and performance trade off. Normally, emitter points will requires replace it in every year or second year. If there
is any damage on emitter point, highly recommend replace it. It is very easy to place by user due to pogo pin
and socket design.
5. Ionizer Status
(Model 310 only allow front panel LED indicator)
5-1. LED
Topside LED gives better indication of ionizer operation and alarm status.
5-2. Audio Alarm
Audible buzzer alarm gives better recognition for user or operator
6. Specification
Model 310
Model 310A(S)
Input Voltage 24V DC, 6W (Maximum)
Ion Emission Steady-State DC Technology
Balance < ±20V
Discharge ±1000V to ±100V less than 2 seconds at 30cm
±1000V to ±100V less than 5 seconds at 60cm
Air ow 59.91 CFM
Emitter Point Tungsten 99.99%
Alarm Function Visual(LED)-HV Power fail
Output Monitoring FMS Interface
Materia Ionizer body- ABS (Gray) Bracket- Aluminum
Operating Environment
Temperature: 15~35℃, Humidity: 35~85% RH
Dimensions 125x135x62mm
(WxHxD) (with bracket 152x154.5x69.5mm)
Weight 507g (with bracket)
Input Voltage 24V DC, 7.2W (Maximum)
Ion Emission Steady-State DC Technology
Balance < ±20V
Discharge ±1000V to ±100V less than 2 seconds at 30cm
±1000V to ±100V less than 5 seconds at 60cm
Air ow 100 CFM
Emitter Point Tungsten 99.99%
Alarm Function Visual(LED), Audio(Buzzer) / HV Power fail
Output Monitoring FMS Interface
Material Ionizer body- ABS (UV Silver pearl coating)
Filter cover- ABS (Black) Bracket- Aluminum
Operating Environment Temperature : 15~35℃, Humidity : 35~85% RH
Dimensions(WxHxD) 125x135x69.5mm (with bracket 152x154.5x69.5mm)
Weight 571g (with bracket)
10
Model 3110(S)
7. Performance
Model 310/310A(S) Model 3110(S)
8. Dimensions
Model 310
<
2 sec
<
5 sec
<
9 sec
<
16 sec
300
300 600 900 1200
0
-300
<
2 sec
<
4 sec
<
7 sec
<
10 sec
300
300 600 900 1200
0
-300
152
125
154.5
135
130 76
5Ø 45
59
62
57
Input Voltage 24V DC, 13W (Maximum)
Ion Emission Steady-State DC Technology
Balance < ±20V
Discharge ±1000V to ±100V less than 2 seconds at 30cm
±1000V to ±100V less than 4 seconds at 60cm
Air ow 140 CFM (Maximum 151 CFM)
Emitter Point Tungsten 99.99%
Alarm Function Visual(LED), Audio(Buzzer)
HV Power fail, Balance fail
Output Monitoring FMS Interface
Material Ionizer body- ABS (UV Silver Pearl coating)
Filter cover- ABS (Black)
Bracket- Aluminum
Operating Environment Temperature: 15~35℃, Humidity : 35~85% RH
Dimensions 148×185×76.6 mm
(W×H×D) (with bracket 188x204.5x76.6mm)
Weight 980g(with bracket)
Autres manuels pour 310
1
Ce manuel convient aux modèles suivants
4
Table des matières
