COOL HEAD CW 90 Manuel utilisateur

P2M053STD-Ver1.1

Instruction Manual

Bedienungsanleitung

Manuel d’utilisation

Manual de instrucciones

Istruzioni d’uso

1 P2M053STD-Ver1.1

P2M053STD-Ver1.1 2

Dear Customer,

Congratulations on your purchase of this product.

Please take a few minutes before starting operation of the appliance and read the following operating

instructions.

Table of Contents

Product Overview........................................................................................................... 3

Safety Tips...................................................................................................................... 4

Intended Use.................................................................................................................. 5

Location and Installation ................................................................................................ 6

Operation....................................................................................................................... 7

Cleaning, Care & Maintenance ..................................................................................... 11

Troubleshooting........................................................................................................... 12

Disposal ....................................................................................................................... 13

Technical data.............................................................................................................. 14

Warranty...................................................................................................................... 14

3 P2M053STD-Ver1.1

Product Overview

Article Description

Wine Cooler –Single temperature

Wine Cooler –Double temperature

P2M053STD-Ver1.1 4

Safety Tips

IMPORTANT: For your safety read the manual

carefully before installing or using this product. Save

this manual for future reference.

Consult Local and National Standards to comply with the following:

1. Health and Safety at Work Legislation

2. Fire Precautions

3. IEE Wiring Regulations

4. Building Regulations

5. DO NOT use the appliance outside.

6. DO NOT attempt to service the item yourself.

7. DO NOT use damaged appliances. If you are in any doubt, consult service

agent.

8. DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-

cream makers etc.), unless they are of the type recommended by the

manufacturer.

9. Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

10.DO NOT use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

11.DO NOT damage the refrigerant circuit.

12.DO NOT stand or support yourself on the base, drawers or doors.

13.DO NOT allow oil or fat to come into contact with the plastic components

or door seal. Clean immediately if contact occurs.

14.This unit can be used by children aged above 8 years and persons with

reduced physical, sensory or mental capabilities or lacking of experience

and knowledge who have been given supervision or using instruction of

the device and understand the resulting risks (for European market).

15.Do not let children play with the appliance.

16.Cleaning and user maintenance must not be carried out by children

without supervision.

17.DO NOT place combustible, explosive or volatile articles, corrosive acids

or alkalis or liquids in the appliance.

5 P2M053STD-Ver1.1

Safety Tips

18.DO NOT use this appliance to store medical supplies.

19.DO NOT use jet/pressure washers to clean the appliance.

20.DO NOT allow children to play with the packaging, and dispose plastic

bags safely.

21.Bottles that contain a high percentage of alcohol must be sealed and

placed vertically in the refrigerator.

22.Always carry, store and handle the appliance in a upright orientation and

move by holding the base of the appliance.

23.Always switch off and disconnect the power supply to the unit before

cleaning.

24.If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

25.This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety

(for market beyond European).

26.Children should be supervised to ensure that they do not play with the

appliance.

27.For indoor use only. Not suitable for installation in an area where a water

jet could be used. Shall not be cleaned by a water jet.

28.To guarantee safe operation, ensure that the appliance is set up and

connected as described in the instruction manual.

29.Any repairs and work on the appliance should only be carried out by the

customer service department/ qualified technician.

30.The key to the electrical cabinet should be kept out of the reach of

children and users.

31.Do not store explosive substances such as aerosol cans with a flammable

propellant in this appliance.

Intended Use

Only use this appliance for cooling and storage of beverage for commercial purposes.

P2M053STD-Ver1.1 6

Location and Installation

Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are

thoroughly removed from all surfaces. To prevent injury or damage to the unit, we recommend that the

appliance should be unpacked and set up by two people.

The climatic class can be found on the rating plate. It specifies the ambient temperatures at which the

appliance may be operated. The rating plate can be found inside the appliance.

Climate Class

Max. Ambient Temperature

Relative Humidity

60%

55%

40%

Maintain a distance of 10 cm between the appliance and walls or other objects for ventilation. Increase

this distance if the obstacle is a heat source.

The appliance should be placed on a solid flat and stable floor to reduce noise and vibration. Level the

appliance by adjusting the feet.

Avoid locating the unit in direct sunlight or near heat sources such as ovens or radiators.

Please make sure the appliance is properly ventilated.

Check that the power supply and voltage used comply with the details on the rating plate. The plug

must be accessible after installation.

Correctly connect and disconnect the plug. When inserting ensure the plug is fully engaged. While

unplugging hold the body of the plug. Never pull the supply cord directly.

If the unit is to be shut down for long period, switch it off and disconnect the plug from socket outlet.

Clean the appliance and leave the door open to prevent odour.

Important! For your personal safety, this appliance must be properly grounded (earthed). This

appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be

inserted into an outlet that is properly grounded and installed. Consult a qualified electrician or service

centre if you do not completely understand the grounding instructions. If doubt exits whether the

appliance is properly grounded, have a qualified electrician check the circuit to make sure the outlet is

properly grounded.

If the cable does not reach the nearest socket, either rearrange your store layout or ask a qualified

electrician to fix a new socket.

If power is cut off, wait for at least 3 minutes before restarting the appliance to avoid damaging the

compressor.

Slide the shelf/drawer into place.

Note: If the unit has not been stored or moved in an upright position, let it stand upright for

approximately 24 hours before operation.

Note: Before using the appliance for the first time, clean the shelves and interior with soapy water.

7 P2M053STD-Ver1.1

Operation

Turn on

Close the door of the appliance.

Then connect to the power outlet.

The current temperature within the appliance is displayed.

Boiling water, gurgling sounds or slight vibrations that are the result of the refrigerant

circulating through the cooling coils.

The thermostat control will click when it cycles on and off.

P2M053STD-Ver1.1 8

Operation

Temperature Setting and Control (90L Single temperature)

The front panel of the thermostat display:

The wine cellar is preset from the factory to automatically accommodate temperature

requirements for red or white wines.

If you store mostly white wines, press the "WHITE" button (2) and the wine cellar will maintain an

average temperature between 7° to 10 °C.

Pushing the "RED" button (4) will yield an average temperature between 13 °C to 16 °C –ideal for

red wines.

How to change the temperature

The wine cellar can be set to any temperature you desire to accommodate your wine storage

requirements. To set the temperature, press both the "WHITE" (2) and "RED" (4) buttons

simultaneously and hold for approximately 3 seconds.

Now you are in temperature set mode. Decrease the temperature by pushing the "WHITE" button

(2) and increase the temperature by pressing the "RED" button (4). Pressing the appropriate button

3 times will adjust the temperature 3 degrees, press 4 times equals 4 degrees, 5 times equals 5

degrees, and so on. Once you have selected the temperature you desire, push the button (5).

Now the wine cellar is programmed and the LED readout will return to current internal

temperature reading.

Interior Light

To complement the look of your wine collection, a light has been built into the wine cellar.

Simply push the button and the light comes on, push again for off. For maximum energy

efficiency, leave light off when not viewing your collection.

When door is open the light will go on. Upon closing the door, the light will go off.

9 P2M053STD-Ver1.1

Operation

Temperature Setting and Control (170L Single temperature)

The front panel of the thermostat:

The temperature of wine cellar is preset to 12 °C (54 °F).

The wine cellar can be set to any temperature between 5°C (41 °F) and 20 °C (68 °F) in either the

compartments to accommodate your wine storage requirements.

How to change the temperature

To set the temperature hold the button for about 3 seconds. You will notice the temperature

display blink. Press the "+" or "-" button (2) to increase or decrease the temperature setting.

Once the desired temperature is attained, press the button or wait about 5 seconds, panel will

memorize the setting.

The temperature display will revert back to display the inside temperature. It may take some time

to reach the set temperature.

Interior Light

To complement the look of your wine collection, a light has been built into the wine cellar.

Simply push the button and the light comes on, push again for off. For maximum energy

efficiency, leave light off when not viewing your collection.

When door is open the light will go on. Upon closing the door, the light will go off.

Press the button about 3 seconds to change from "°C" and "°F" or vice versa

Table des matières

Langues :

Autres manuels COOL HEAD Appareils de cuisine

COOL HEAD

COOL HEAD CW40 Manuel utilisateur

Manuels Appareils de cuisine populaires d'autres marques

Tayama

Tayama TYG-35AF Manuel utilisateur

AEG

AEG 43172V-MN Manuel utilisateur

REBER

REBER Professional 40 Guide de l'utilisateur

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuel utilisateur

Presto

Presto fountain popper Manuel utilisateur

Westmark

Westmark 1035 2260 Manuel utilisateur

Zanussi

Zanussi ZCG64396XA Manuel utilisateur

HOFFEN

HOFFEN SM-9302M Manuel utilisateur

Philips

Philips HD3133 Manuel utilisateur

Ronco

Ronco Beef Jerky Manuel utilisateur

Hendi

Hendi 470411 Manuel utilisateur

Livoo

Livoo MEN386 Manuel utilisateur

Vogue

Vogue D446 Manuel utilisateur

croydon

croydon WR-10313-700 Manuel utilisateur

ADE

ADE AUTOMATIC-L Manuel utilisateur

Chefman

Chefman RJ43-SQ Series Manuel utilisateur

Vacmaster

Vacmaster VP680 Manuel utilisateur

Jetmaster

Jetmaster 900HG Manuel utilisateur