Convoy 5000 Performance Series Guide de démarrage rapide
Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph (888) 565-2583
Owner’s / Installaon Manual
5000 Performance Series
Dome Interior Camera
Mounng the Camera Warning: ensure all power remains o unl installaon is completed!
Maintenance
Specicaons
1) Select a posion to mount the camera that is free of obstrucons and moving parts and has a proper viewing angle of the de-
sired area in the vehicle.
2) Remove the camera dome from the camera by loosening the screws.
3) Use the camera’s bracket as a mounng template to drill mounng holes. Align the mounng bracket with pre-drilled holes
then secure bracket with appropriate screws.
4) Route camera cable along with exisng factory harness where available, avoiding moving parts.
5) Reinstall the camera dome on the bracket using the supplied screws, once view is adjusted into posion.
• Ensure Power is o before installaon to prevent CCD and monitor damage
• Ensure the system power is o before connecng or disconnecng of equipment
• Use a microber so, damp cloth to clean the camera lens.
Image Sensor: ⅓” Sony CCD (WDR)
Resoluon: 967 x 494
S/N Rao: ≥50dB
Lens: 2.8mm
Min Illuminaon: 0Lux (LED on)
IR LED: 15pcs
Night Vision Distance: 35
Environment: IP66
Horizontal Angle: 95°
Vercle Angle: 72°
Overview
Interior Dome Camera, designed for
Driver monitoring of interior of bus,
RV, and other in-vehicle/trailer ap-
plicaons. Camera is protected by
the dome, has 35 IR capability in
total darkness, along with a wide
viewing angle.
Specicaons Connued:
Case Material: ABS Plasc
DC Power: 12V
Current: <1A (DC12V), <10W
Operang Temperature: -30° ~ 70° C
TV System: NTSC
Dimensions: 120mm dia x 60mm H
Troubleshoong
Symptoms Soluons
Cloudy Image Clean Dirty Camera Lens, camera dome inside and out
No Power / Image Check Power Connecons
Unstable Image Check Mounng Hardware and Camera Connecon for ghtness
Convoy Technologies 6409 Highview Drive | Fort Wayne, IN 46818 | Ph (888) 565-2583
Subject to the provisions described below, this CT product is protected for 1 year against defects in material and workmanship.
Should a product fail to perform as described above within the warranted period, it will be repaired or replaced with the same or
funconally equivalent product by CT. CT Support will determine if there is a warrantable condion. If warrantable condion ex-
ists, a return authorizaon (RA) will be issued. The owner is responsible for any labor and installaon charges. The warranty does
not include any further obligaon whatsoever, including but not limited to actual installaon of the replacement unit on the cus-
tomer’s vehicle. This warranty does not apply if, in the judgement of CT, unit is damaged due to improper installaon, unauthor-
ized disassembly of the unit, or mishandling beyond normal use, or other acts or omissions not sanconed by the owners manual,
or the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or main-
tained in a manner not conforming to product manual instrucons, has been modied in any way. Repair by anyone other than CT
or an approved agent will void this warranty. The maximum liability of CT under this warranty is limited to the purchase price of the
product covered by the warranty. CT is not liable for any direct, consequenal, indirect or punive damages of any kind. All defec-
ve products should be returned to CT with shipping charges prepaid. CT will not accept collect shipments.
Warranty and Support Informaon
Autres manuels Convoy Caméra de sécurité
