Converters.TV ID 515 Manuel utilisateur
Network IP Digital Video
Server - 4 port ID# 515
Operation Manual
Introduction
The Network IP Video Server - 4 Port is a Digital Network broadcaster
allows you to transmit audio, video as a streaming over the Internet You
can share your DVD program or TV Program in your Internet web site or
connect to a Video Camera to watch your home or baby room on internet
from anywhere in the world, and you also can email the image to your
friends or families Network IP Video Server - 4 Port supports motion
detection function, and also supports the image quality, image size and
image parameters adjustments functions
Feature
n Pure hardware design, just Plug & Display
n High performance and fully configurable MJPEG compression engine
n Remote view and record through the IE Browser (Suitable for Window
Vi ta)
n Supports Input：4 Video Input and 1 Audio Input
n Supports 4 video channels display at the same time
n ActiveX control supports digital signature
n Supports image recording function (MJPEG format) and snapshot function
n Supports motion detection function and send E-mail when something
moving
n Adjustable image quality Lowest / Low / Medium / High / Highest
n Adjustable resolution 160X120 / 176X144 / 320X240 / 352X288 / 640X480
/ 704X576
n Adjustable image frequency Indoor 50 / Indoor 60 / outdoor
n Adjustable image parameters Brightness / Contrast / Saturation / Hue /
Sharpness
n Support many Network services: HTTP (User Interface), FTP (FTP Client),
PPPoE (Fixed IP Address is recommended), Dynamic DNS, and firewall
port forwarding (used in virtual IP address)
Hardware Conection
n Default：Press this button to restore the original default parameters
n Reboot (re et)：Press this button to restart the Network IP Video Server
n 4 Video IN：Connects to video out of video source (camera、DVD player)
n 1 Audio IN：Connects to sound output (microphone、DVD player)
n RJ 45 Input：Connects to router or PC by RJ-45 Cable
n DC IN：Connects to power adapter (-) ß ( ●à (+), DC 5V/2A
n Power LED：Power LED indicator
Software In tallation
And Operation Guide
Fir t time to login Network IP Video Server 4 Port
Step 1：Please execute the “ipEdit exe” in the CD, and select the “Unblock”
( windows XP SP2 only)
Step 2：“Video Server……192 168 1 127” has been listed in the left side, and
double click ”192 168 1 127” to login the Network IP Video Server 4 Port
ipEdit Tool Window of Video Server 4 Port
If you can not connect to the Address: 192 168 1 127, please according the
following steps to get Network information
Step 3：Click on “Start“ → “Run“ and key in ”command“, then press
“ENTER”
The MS-DOS window will appear, please key in ” ipconfig “ and then press
“ ENTER “ to get the network information
Step 4：Then you can assign IP Address, Netmask (Subnet Mask) and Gateway
(Default Gateway) for the IP Controller
NOTE：You must use the same Subnet Mask” 255 255 255 0 “and Gateway
”192 168 2 254” You can use any IP Address between 192 168 2 1-254, but
please make sure that theIP Address has never been used or is used by any other
IP addressable device
Step 5：For example, key in the following parameters and click “Submit”
Login to the IP Video Server 4 Port
Default IP Address：http://192 168 1 127/
How to U e The
Virtual IP Addre
If your network Architecture supports the following figure, you will need to do
port and local virtual IP forwarding in the firewall or gateway setup
Step 1：In this Page http://192.168.1.127/Ctl/index.htm?Cu ?Audio/, please
select “Configuration” and “Sy tem” assign two different port numbers for the
Http Protocols ( for example HTTP：8889, HTTP：8888 )
(Plea e remember reboot the y tem)
Step 2：Setup your firewall or gateway, and assign a Local Virtual IP:
192 168 1 127 and open a port 8888 and 8889 for the IP Video Server 4 Port, the
following figure is just a example, you need to ask your Internet Service Provider
Step 3：In the Local PC, please open the Internet Explorer then key in the IP
address：
http://192.168.1.127
Step 4：In the Remote PC, please open the Internet Explorer, then key in the IP
address：
http://61.30.13.40:8888
Step 5：Setup the Internet Explorer about FTP Client
Click “Tools” → “Internet” → “Options” → “Advanced”, and then the
“Internet Options“ window will appear, please remove the Item ”Use Passive
FTP(for firewall and DSL modem compatibility )”
Internet option
Limitation of FTP Protocol
If your network Architecture is the same as the figure, you can not transfer Files
with FTP, because FTP server (IP Video Server) and FTP client (Remote PC)
both are virtual IP addresses
n You need to change the Remote PC to be a real IP address, also can change
the IP Video Server to be a real IP Address
Change the Remote PC to be a Real IP addre
Change the IP Video Server 4 Port to be a Real IP address
n Please Setup the Internet Explorer about FTP Client Select the item “Use
Passive FTP(for firewall and DSL modem compatibility )”
Connect To ADSL
n We suggest that you can use the router to dial up the ADSL, more
information please refer to the router Help
n If you want to connect IP Video Server 4 Port with ADSL directly,
please use the following steps to dial up PPPoE, but if the IP Address is
dyna ic, you need to setup DDNS function.
Ce manuel convient aux modèles suivants
1
Table des matières
