Continental Refrigerator HS Series Manuel utilisateur
HS Series Hose Saws
HS150 / HS300 / HS500 Operators Manual
ContiTechwww.contitech.us
PC125 and PC125M Operators Manual
PC1
C1
25
an
and
nd
PC
C
125
M O
O
pe
per
ators Man
ual
al
2
SAFETY PRECAUTIONS
MODELS COVERED
This manual is applicable to different variations of the Continental HS Series Hose Saws.
• READ INSTRUCTIONS AND IDENTIFYALL COMPONENT PARTS BEFORE USING HOSE SAW.
• MOUNT THE HS150, HS300, OR HS500 HOSE SAW ONASTURDY WORKBENCH.
• ALLOW THE BLADE TO REACH FULL SPEED BEFORE STARTINGACUT.
• PERIODICALLY EXAMINE THE BLADE FOR CRACKSAND / OR BROKEN TEETH.
• REPLACE IF NECESSARY.
• KEEP BOTH HANDS AWAY FROM THE CUTTING BLADE.
• DO NOT REMOVE OR DEFEATANY OF THE GUARDS OR SAFETY FEATURES OF THE SAW.
• ALWAYS WEAR EYE PROTECTION, DUST MASK,AND PROTECTIVE GLOVES.
SAFETY PRECAUTIONS
! !
Revised 04/27/2017
3
TABLE OF CONTENT
SAFETY PRECAUTIONS-----------------------------------------------------------------------------------------------------2
CONTINENTALHS SERIES HOSE SAWS SERIES & TECHNICAL DATA----------------------------------------------------------------------4
INITIAL SET UP------------------------------------------------------------------------------------------------------------------------------5
HS150 / HS300 / HS500 INCLUDED TOOLING-------------------------------------------------------------------------------------------------------6
HS150 / HS300 / HS500 OPTIONAL PARTS-----------------------------------------------------------------------------------------------------------7
HS150 / HS300 / HS500 BLADE AWARENESS-------------------------------------------------------------------------------------------------------9
HS300/HS500HOSEHELPERSETUP----------------------------------------------------------------------------------------------------------------10
HS150 / HS300 / HS500 HOSE BENDING PINS SET UP------------------------------------------------------------------------------------------11
HOW TO CHANGE SAW BLADE-------------------------------------------------------------------------------------------------------------------------12
HOW TO INSERT THE VACUUM ATTACHMENT--------------------------------------------------------------------------------------14
HOW TO INSTALL THE HS300 / HS500 MISTER HOSE ASSEMBLY-----------------------------------------------------------------------15
HOW TO ADJUST AIR PRESSURE & OIL DROPS----------------------------------------------------------------------------------------------17
HS150 / HS300 / HS500 REPLACEMENT ACCESSORIES--------------------------------------------------------------------------------------18
COMPONENT PARTS BREAKDOWN--------------------------------------------------------------------------------------------19
4
CONTINENTAL HS SERIES HOSE SAWS & TECHNICAL DATA
These rugged, HS150 / HS300 / HS500 dependable saws offer features not found on other saws. Choose the one with
the capacity and features which meet your individual requirements.
Technical Data HS150 HS300 HS500
Capable of cutting: 1-¼" (4 wire) up to 1" (6 wire) 1-¼" (6 wire) up to 2" (2 wire) 1-¼" (4 wire) up to 2" (6 wire)
Dimensions: L: 28-¾" x W: 21" x H: 12-¼" L: 29-¾" x W: 26-¾" x H: 16" L: 29-¾" x W: 26-¾" x H: 16"
Weight: 70 lbs Weight: 120 lbs Weight: 120 lbs
HS Model ContiTech Part # Voltage Phase Amps
HS150 20614553 110 1 15
HS303 20614554 230 3 20
HS301 20614555 230 1 30
HS503 20614556 230 3 20
HS501 20614557 230 1 30
Available HS150 Mobile Hose Saw
Ideal for on-site service where electricity is not available.
For more, information contact continental customer service.
HS Model ContiTech Part # Voltage
HS150-12VDC 20829262 12VDC
HS150-24VDC 24VDC
5
HS150 / HS300 / HS500 INITIAL SET UP
• Mount your HS Series Hose Saw on a sturdy workbench in a
well-lit area. Workbench should be able to support the hose saw
weight.
• Check electrical circuit to be certain that it matches the hose
saw requirements shown on the tag attached to the hose saw
cord.
DO NOT USE AN EXTENSION CORD OR RUN FROM
PORTABLE POWER SOURCES AS LOW VOLTAGE CAN
DAMAGE THE MOTOR.
• Check to be certain that the blade rotates in the direction of
the arrow shown on the motor housing.
Note: Blade also has a rotation arrow.
Note: New blades must be properly conditioned to assure
long life and clean cuts. For the first ten cuts, feed the blade
slowly through a medium size hose. This will properly break
in and condition the blade for long life.
FOLLOW THESE STEPS BEFORE YOU USE YOUR HS SERIES
HOSE SAW FOR THE FIRST TIME.
6
HS150 / HS300 / HS500 INCLUDED TOOLING
• Counter
Included only for HS300/HS500 Series.
Not available for HS150.
A resetable counter makes it easy to keep track of
the number of cuts made.
• 1 ¼" Vacuum Adapter
(For 2 ½” shop vac, or vacuum accessories).
Included for all HS150 / HS300 / HS500 Series.
Vacuum port allow attachment of vacuum system to keep
saw and work space clean.
• Hose Bending Pins
Included for all HS150 / HS300 / HS500 Series.
Hose Bending Pins prevent the blade from binding during
a cut.
• Serrated Blade (General Purpose)
Included for all HS150 / HS300 / HS500 Series.
Is an aggressive, universal blade that cuts multi-spiral and
braided hose very well.
• Hose Helper
Included only for HS300 / HS500 Series.
Not available for HS150.
A “Hose Helper” attachment for the HS300 & HS500
prevents the hose from being drawn back during
a cut and gives the operator the ability to more
precisely control the cut length. The “Hose Helper”
can be mounted on either end of the saw.
7
HS150 / HS300 / HS500 OPTIONAL PARTS
• Mister Hose Assembly
Optional only for HS300 / HS500 Series.
Not available for HS150.
The mister sprays a fine mist of air tool oil on the saw blade
for longer blade life and cleaner cuts.
• Hose Channel System
Available in 5 foot sections only for HS300 / HS500 Series.
The Hose Channel System both measures and supports the
hoses up to 2 inch diameter as they are being cut.
• Mobile Cart
Optional for all HS150 / HS300 / HS500 Series.
HS hose saw model, can be mounted on the mobile cart for
easy moving around the shop.
Mobile Cart comes with (2) lockable swivel casters.
The HS500-1 Series hose saw is shown, mounted on the mobile
cart with the hose helper and hose channel installed.
8
HS150 / HS300 / HS500 OPTIONAL PARTS
• Double Bevel Blade with SS Slots
Available for all HS150 / HS300 / HS500 Series.
• Scalloped Blade (General Purpose)
Available for all HS150 / HS300 / HS500 Series.
Hose Saw
Model Blade
Type ContiTech
Part # Blade Size
Diameter Arbor
Size Alternative
Part #
HS150 Serrated (Included) 20683699 10 inch 1 inch
Scalloped (Available) 10 inch 1 inch 104034
Double Bevel w/ SS Slots (Available) 20804794 10 inch 1 inch
HS300 & HS500 Serrated (Included) 20922988 12 inch 1 inch
Scalloped (Available) 20683700 12 inch 1 inch
Double Bevel w/ SS Slots (Available) 12 inch 1 inch 102210
For more information on products, contact Continental customer service.
9
HS150 / HS300 / HS500 BLADE AWARENESS
Note: New blades must be properly conditioned to
assure long life and clean cuts. For the first ten cuts,
feed the blade slowly through a medium size hose.
this will properly break in and condition the blade for
long life.
Note: The hose should begin to bend before contacting
the blade. This will increase blade life and keep the
hose from tearing and deforming.
Note: Once the blade and motor reach full RPM apply
steady downward pressure on the handle in order to force
the hose into the blade. Do not apply enough force to stall
the blade, and ease up on the pressure before the blade
completes the cut. This will keep from separating the wires
as the blade exits the hose.
Note: The edges of the blade may appear to be dull.
This does not mean that the blade is not effective.
As long as the blade is still giving clean cuts, do not
replace the blade.
NOTE: PAY CLOSE ATTENTION TO THE DIRECTION OF
ROTATION MARKED ON THE SERRATED BLADE.
IT IS THE OPPOSITE OF MOST BLADES OF THIS TYPE.
CAUTION: Cracks can cause extremely damage to the
blade, periodically examine the blade for cracks and / or
broken teeth.
Serrated Blade
Scalloped Blade
Double Bevel w/SS Slots Blade
Damaged Blade
10
HS300 / HS500 HOSE HELPER SET UP
Step 1
To set hose helper, loosen locking knob and lift the
retraction.
Step 2
Feed the hose through from the rear end, and set
retraction a slight angle and tighten locking knob.
This will prevent hose from back feeding from cutting
area.
Extra Features of the Hose Helper
The hose helper has multi mounting positions,
can be adjusted up to 10" away from hose saw
base.
With the hose helper extension attached, can be
adjusted up to 22" away from the hose saw base.
Retraction
Locking Knob
Hose Helper Extension
Ce manuel convient aux modèles suivants
3
Table des matières
