Contec FX-DS110-APL Manuel utilisateur

FX-DS110-APL i

No part of this document may be copied or reproduced in any form

by any means without prior written consent of CONTEC Co., LTD.

CONTEC Co., LTD. makes no commitment to update or keep

current the information contained in this document.

The information in this document is subject to change without

notice.

All relevant issues have been considered in the preparation of this

document. Should you notice an omission or any questionable

item in this document, please feel free to notify

CONTEC Co., LTD.

Regardless of the foregoing statement, CONTEC assumes no

responsibility for any errors that may appear in this document nor

for results obtained by the user as a result of using this product.

Trademarks

MS, Microsoft, MS-DOS and Windows are trademarks of Microsoft

Corporation. Other brand and product names are trademarks of their

respective holder.

FX-DS110-APL

Product Configuration

･FX-DS110-APL …1

･AC Adapter with 1.8m cable …1

･Tapping screws (for mounting on wall, etc.) …2

･Locking screw (for connecting to ground wire) …1

･Magnets (for mounting on metallic surfaces) …2

･Rubber feet …4

･Floppy disk …1

･User’s Manual (this booklet)…1

･Installation Guide …1

User's Manual

FX-DS110-APL Floppy disk x 1

AC Adapter x 1

Installation

Guide

Tapping screw x 2

Rubber feet x 4

Locking screw x 1

User's Manual

Magnet x 2

POWER

WRX

WLINK

LIN K

Check the contents to make sure that you have everything listed

above. If you do not have all the items, contact your distributor

or CONTEC group office where you purchased.

FX-DS110-APL iii

Table of Contents

Table of ContentsTable of Contents

Table of Contents

Trademarks ........................................................................i

Product Configuration..................................................... ii

1. Introduction

1. Introduction1. Introduction

1. Introduction................................

................................................................

.................................................

.................

Features ........................................................................1

Terminology/Abbreviations ..........................................2

Limited One-Year Warranty.........................................2

How to Obtain Service..................................................3

Liability.........................................................................3

Handling Precautions...................................................3

Precautions for Use ......................................................4

Precautions Related to Electromagnetic Interference4

Precautions Related to Service ....................................5

About the Manual.........................................................6

2. Overview

2. Overview2. Overview

2. Overview................................

................................................................

....................................................

....................

Component Locations .......................................................7

LED Indicators..................................................................8

DIP Switches.....................................................................9

Multi-channel Operation................................................10

3. Operating Mode Descriptions

3. Operating Mode Descriptions3. Operating Mode Descriptions

3. Operating Mode Descriptions................................

................................................................

.....................................

.....

ADHOC (Simple Mode)...................................................13

Infrastructure (Standard Mode) ....................................14

Operating Modes and Communications ........................15

4. Setup

4. Setup4. Setup

4. Setup ................................

................................................................

.......................................................

.......................

Wall Installation .............................................................17

Using the Mounting Screws (Included).....................17

Using the Magnets (Included)....................................18

Table Top Installation.....................................................20

Cable Installation ...........................................................20

Power Supply Connection...............................................21

Ground Connection.........................................................22

FX-DS110-APL

5. Settings

5. Settings5. Settings

5. Settings................................

................................................................

......................................................

......................

Preparing the Utility Software ......................................23

Utility Software Settings................................................24

Edit Device Name.......................................................25

Configuration..............................................................26

Firmware.....................................................................27

Status ..........................................................................28

Setting Descriptions .......................................................29

Edit..............................................................................29

Base.............................................................................29

SNMP ..........................................................................32

Spanning Tree.............................................................33

Other Settings.............................................................35

To Register or Set Up a New Access Point.....................36

To Edit Settings for an Existing Access Point...............36

To Use Data scramble Functions for Better Security...37

To Use SNMP Agent Functions......................................37

To Use Spanning Tree.....................................................38

To Access the APL from a Different Router...................38

6. Spanning Tree Algorithms (STA)

6. Spanning Tree Algorithms (STA)6. Spanning Tree Algorithms (STA)

6. Spanning Tree Algorithms (STA)................................

................................................................

..................................

....

What is an STA?..............................................................39

STA Parameters..............................................................40

Bridge Level................................................................40

Port Level....................................................................42

Sample STAApplication.................................................43

7. SNMP Agent Functions

7. SNMP Agent Functions7. SNMP Agent Functions

7. SNMP Agent Functions................................

................................................................

.........................................

.........

SNMPc Overview............................................................47

MIB Support....................................................................48

Control Using SNMPc ....................................................49

Building-in to SNMPc.....................................................50

MIB Database Updates ..................................................50

FX-DS110-APL v

8. Troubleshooting

8. Troubleshooting8. Troubleshooting

8. Troubleshooting................................

................................................................

...............................................

...............

When Communication Fails.......................................51

When SNMP Connections Fail...................................52

When the APL Will Not Start ....................................53

9. Appendix

9. Appendix9. Appendix

9. Appendix................................

................................................................

.....................................................

.....................

Product Specifications ....................................................55

Input/Output Interface...................................................57

UTP Port Pin Assignments ........................................57

Glossary...........................................................................58

10. Index

10. Index10. Index

10. Index................................

................................................................

.......................................................

.......................

FX-DS110-APL

List of Figures

List of FiguresList of Figures

List of Figures

Figure 2.1. Component Locations.................................................7

Figure 2.2. Multi-channel Operation...........................................10

Figure 2.3. Channel Frequencies.................................................11

Figure 3.1. ADHOC Mode..........................................................13

Figure 3.2. Infrastructure Mode..................................................14

Figure 4.1. Wall Installation........................................................17

Figure 4.2. Attaching Magnets....................................................18

Figure 4.3. Removing Magnets...................................................18

Figure 4.4. Installation on a Steel Desk......................................19

Figure 4.5. Cable Connection......................................................20

Figure 4.6. Power Supply Connection ........................................21

Figure 4.7. Ground Connection...................................................22

Figure 5.1. Main Menu................................................................24

Figure 5.2. Edit............................................................................25

Figure 5.3. Configuration............................................................26

Figure 5.4. Firmware...................................................................27

Figure 5.5. Status.........................................................................28

Figure 6.1. Sample STA Application..........................................43

Figure 6.2. After STA Application..............................................44

Figure 6.3. Reconfigured After STA Application.......................45

Figure 7.1. Settings......................................................................49

Figure 9.1. External Dimensions.................................................56

FX-DS110-APL vii

List of Tables

List of TablesList of Tables

List of Tables

Table 2.1. ADHOC (Simple Mode) ...............................................8

Table 2.2. Infrastructure (Standard Mode) [Unit Type AP]...........8

Table 2.3. Infrastructure (Standard Mode) [Unit Type Station] ....8

Table 2.4. Other..............................................................................8

Table 2.5. DIP Switches.................................................................9

Table 3.1. Operating Modes and Communications......................15

Table 7.1. Group Names...............................................................48

Table 9.1. Physical Specifications................................................55

Table 9.2. Software Specifications...............................................55

Table 9.3. Installation Environment Conditions

(Environment Specifications)...................................55

Table 9.4. UTP Port Pin Assignments..........................................57

FX-DS110-APL

viii

Introduction

FX-DS110-APL 1

1. Introduction

Thank you for purchasing the FX-DS110-APL access point.

This product is a wireless LAN access point using the 2.4GHz

spectrum diffusion system, and is compatible with IEEE Standard

802.11b for wireless LAN.

The FX-DS110-APL is designed for use as an access point as well

as a station (Ethernet ⇔wireless converter). It is independent of

operating systems or protocols, so that it can be connected by UTP

cable to any Ethernet-compatible desktop computer, workstation,

point-of-sale terminal, printer, etc. for immediate wireless LAN use.

This product can also enable wireless communications from any PC

previously unsuitable for wireless communications due to lack of a

PC card slot or expansion bus slot.

Of course the FX-DS110-APL also operates as an access point,

allowing the user to configure a small wireless LAN system using

the product by itself.

This document explains how to use the FX-DS110-APL. Be sure to

read it carefully so that you can use the product correctly.

Features

･Ultra-compact antenna (micro access point)

Space-saving design allows installation anywhere (wall, magnet,

desktop)

･Operates as a LAN station

･Optional power supply from LAN cable

Uses compact, lightweight AC adapter.

･Full range of functions (roaming, 13-channel support)

･Automatic transmission speed (wireless) switching

Automatically switches transmission speeds from 11Mbps to

5.5Mbps, 2Mbps, 1Mbps according to conditions.

･Built-in SNMP agent

Uses MNMP compatible software for easy network management.

･Can be used with higher level model FX-DS110-APE.

Introduction

FX-DS110-APL

Terminology/Abbreviations

The following terms and abbreviations are used in this manual for

convenience.

FX-DS110-APL Access point/AP/APL

FX-DS110-PCC、FX-PCI-EXT2 User unit

or a PC containing the above

FX-DS110-APL Wireless terminal

or a device containing the above

Personal computer PC

Full term Term used in this manual

Limited One-Year Warranty

CONTEC Interface boards are warranted by CONTEC Co., LTD. to

be free from defects in material and workmanship for up to one year

from the date of purchase by the original purchaser.

Repair will be free of charge only when this device is returned

freight prepaid with a copy of the original invoice and a Return

Merchandise Authorization to the distributor or the CONTEC group

office, from which it was purchased.

This warranty is not applicable for scratches or normal wear, but

only for the electronic circuitry and original boards. The warranty

is not applicable if the device has been tampered with or damaged

through abuse, mistreatment, neglect, or unreasonable use, or if the

original invoice is not included, in which case repairs will be

considered beyond the warranty policy.

Autres manuels pour FX-DS110-APL

Table des matières

Autres manuels Contec Point d'accès sans fil

Contec

Contec FXE2000-G Manuel utilisateur

Contec

Contec FXA3000 Series Manuel utilisateur

Contec

Contec FX-DS540-APP Manuel utilisateur

Contec

Contec FXE3000 Series Manuel utilisateur

Contec

Contec FXE3000-EU Manuel utilisateur

Contec

Contec FX-DS110-APL Manuel utilisateur

Contec

Contec FXA3000-US Manuel utilisateur

Contec

Contec FXE2000-DG Manuel utilisateur

Contec

Contec FX-DS110-APE Manuel utilisateur

Contec

Contec FXA2000-G Manuel

Contec

Contec FX-DS540-APDL-U Manuel utilisateur

Contec

Contec FXA2000-G Manuel utilisateur

Contec

Contec FXE3000-US Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur