Contec IPC-PT/MV10 Series Instructions de montage

IPC Series

IPC-PT/MV10 Series, IPC-PT/MV11 Series,

IPC-PT/MV15 Series, IPC-PT/MV16 Series,

IPC-PT/LS10 Series, IPC-PT/LS11 Series,

IPC-PT/LS15 Series, IPC-PT/LS16 Series,

IPC-PT/SV10DC1, IPC-PT/SV15DC1,

IPC-PT020LS-AC, IPC-BX/M10DC5

Windows CE .NET 4.2

Software Manual

CONTEC CO.,LTD.

Software Manual i

Introduction

This manual describes Windows CE .NET 4.2 installed on the SH4 CPU based, Windows CE .NET 4.2

installed computer *1 (hereafter referred to as the SH4 CPU & .NET installed IPC series).

For information related to this series’ hardware, refer to the Hardware Manual.

*1 : IPC-PT/LS10 series, IPC-PT/LS11 series, IPC-PT/LS15 series, IPC-PT/LS16 series, IPC-PT/MV10 series, IPC-PT/MV11 series,

IPC-PT/MV15 series, IPC-PT/MV16 series, IPC-PT/SV10DC1, IPC-PT/SV15DC1, IPC-BX/M10DC5, IPC-PT020LS-AC

ii Software Manual

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document. The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document nor for results obtained by the user as a result of using this product.

Trademarks

MS, Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation, U.S.A.

Other names of companies or products used in this documents are trademarks or registered trademarks of

the respective companies.

Software Manual iii

Limited One-Year Warranty

CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and

workmanship for up to one year from the date of purchase by the original purchaser.

Repair will be free of charge only when this device is returned freight prepaid with a copy of the original

invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office, from

which it was purchased.

This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and

original products. The warranty is not applicable if the device has been tampered with or damaged

through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in

which case repairs will be considered beyond the warranty policy.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization Number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor

be liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

iv Software Manual

Table of Contents

Introduction.......................................................................................................................................... i

Copyright ............................................................................................................................................ ii

Trademarks ......................................................................................................................................... ii

Limited One-Year Warranty..............................................................................................................iii

How to Obtain Service.......................................................................................................................iii

Liability..............................................................................................................................................iii

Table of Contents............................................................................................................................... iv

1. FEATURES OF THE WINDOWS CE .NET 4.2 1

2. BASIC OPERATION 3

Run a program (Using TASKMAN) .................................................................................................. 3

Switching the Shell ............................................................................................................................. 4

Run a program (Using SHELL).......................................................................................................... 5

3. STANDARD DRIVERS 7

4. ON-BOARD DIP SWITCH SETTINGS 9

DIP Switches and Their Functions ................................................................................................... 10

5. FUNCTION SWITCH, POWER LED AND USER LED 11

Function switch................................................................................................................................. 11

POWER LED.................................................................................................................................... 11

USER LED........................................................................................................................................ 12

6. SYSTEM SETTING 13

System Setting Summary.................................................................................................................. 14

“Shell” Tab .............................................................................................................................. 14

“Backlight” tab ........................................................................................................................ 15

“Input” tab ............................................................................................................................... 16

“Panel” tab ............................................................................................................................... 17

Software Manual v

7. CONTEC MANAGER 19

Run/Show/Close/Destroy CONTEC Manager ................................................................................. 19

Run CONTEC Manager............................................................................................................. 19

Show CONTEC Manager .......................................................................................................... 19

Close CONTEC Manager .......................................................................................................... 19

Destroy CONTEC Manager....................................................................................................... 19

Scheduling Program Execution ........................................................................................................ 20

Add a schedule........................................................................................................................... 20

Delete a schedule ....................................................................................................................... 20

Set property of a schedule ......................................................................................................... 20

“Add Schedule” and “Set Schedule” dialog box..................................................................... 21

Loading services ............................................................................................................................... 28

Manage the user information............................................................................................................ 29

Add a user .................................................................................................................................. 29

Update a user’s information ...................................................................................................... 29

Delete a user............................................................................................................................... 29

Manage boot action........................................................................................................................... 30

Boot action................................................................................................................................. 30

Boot Information ....................................................................................................................... 30

Version and system information....................................................................................................... 31

Change the Title of the CONTEC Manager ..................................................................................... 32

8. NFDISK-RELATED PROCESSING 33

ObjectStore files ............................................................................................................................... 33

Object store Backup and Restore .............................................................................................. 33

Registry Backup and Restore .................................................................................................... 34

9. FORCE RESET FUNCTIONS 35

10. BIOS UPDATE FUNCTION 37

11. EMERGENCY BOOT FUNCTION 39

12. AUTO RUN FUNCTION 41

Usage of Auto-Run function......................................................................................................41

Method to set AutoRun.inf ........................................................................................................ 42

vi Software Manual

13. APPENDIX 43

How to Develop Applications for Windows CE .............................................................................. 43

Development Environment ........................................................................................................ 43

Development Machine Software Installation ............................................................................ 45

Set Target Machine IP Address ................................................................................................. 46

Checking the Connection between the Development and Target Machines.................................

(eMbedded Visual C++ 4.0) ...................................................................................................... 47

Checking the Connection between the Development and Target Machines.................................

(Visual Studio .NET 2003) ........................................................................................................ 52

Developing Applications by eMbedded Visual C++4.0 ........................................................... 56

Application development using Visual Studio .NET 2003 ....................................................... 57

Download application................................................................................................................ 60

Debug Application..................................................................................................................... 60

Embedding the application ........................................................................................................ 60

Using Remote Tools ......................................................................................................................... 61

Connecting the Development and Target Machines ................................................................. 61

FAQ................................................................................................................................................... 62

Operating Edition....................................................................................................................... 62

Development Edition ................................................................................................................. 64

1. Features of the Windows CE .NET 4.2

Software Manual 1

1. Features of the Windows CE .NET 4.2

Windows CE .NET 4.2 installed on the SH4 CPU & .NET installed IPC series has the following

CONTEC-proprietary features :

- VARIETY OF DRIVERS

As standard equipment, this series provides Windows CE drivers for all devices installed on the

motherboard. For information about the drivers, see Chapter 3, “Standard Drivers”.

- Setting function

This series allows you to set each standard driver using the dedicated control panel. You can use this

function to customize the unit to your needs.

For information about available adjustments, see Chapter 6, “System Setting”.

- CONTEC Manager

Supplies many remote maintain tools for use this series more easily.

For the details about functions in “CONTEC Manager”, please refer to Chapter 7, “CONTEC

Manager”.

- OBJECT STORE / REGISTRY BACKUP FUNCTION

When any modification is made to a driver we have provided, this function allows you to modify the

module without changing the Windows CE OS image (“NK.BIN”). Also, it allows you to back up

registry settings.

- NFDisk function

As Windows CE can handle onboard NAND Flash as its disk, your application can be copied onto

NFDisk.

- Quick boot

This series employs the XIP & memory loading boot function for faster startup (about 10 seconds)

and operation.

- WATCH DOG TIMER FUNCTION

This series supports watch dog timer function. User application can use watch dog timer by call

watchdog timer APIS.

- BACK LIGHT FUNCTION

This series supports backlight function. This function can be set from the control panel to ensure

that the LCD backlight is switched off when no input has been made for a certain period of time.

- Auto-Run function

It is possible to start programs when a ATA card or a CF card is inserted into PC card slots. By using

this function, many work can be completed automatically, such as file copying, program installation,

etc. Details about the usage of auto-run function, please refer to Chapter 12, “Auto RUN Function”.

- BIOS Update Function

This series uses an exclusive BIOS to provide hardware initialization as well as versatile boot

functions.

The BIOS is contained on an EEPROM and includes a BIOS update function which allows easy

updating for version upgrades.

Also included is an emergency boot function as a recovery means in case of failing to write BIOS.

Details about the recovery method , please refer to Chapter 11, “Emergency Boot Function”.

1. Features of the Windows CE .NET 4.2

2Software Manual

2. Basic operation

Software Manual 3

2. Basic operation

Run a program (Using TASKMAN)

The SH4 CPU & .NET installed IPC series has two shells : a simple shell (TASKMAN) and a Windows

like shell (IESHELL).

By default, TASKMAN is selected as the shell, so you need to take the following steps to execute an

application.

1. With Windows CE up and running, press the ALT and Tab keys at the same time (ALT+Tab) to

invoke TASKMAN (Task Manager).

2. When TASKMAN has been started, press the [Run] button to open the “Run” dialog box. When you

know the name of a desired program, enter its full pathname in the “Open” field and press the [OK]

button to run the program.

3. If you do not know the name of the desired program, press the [Browse] button in the “Run” dialog

box. In the dialog box that appears, select that program and press the [OK] button.

The full pathname of the selected program will be entered in the “Open” field in the “Run” dialog

box. Press the [OK] button to invoke the desired program.

Autres manuels pour IPC-PT/MV10 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Contec Écran tactile

Contec

Contec IPC SERIES Manuel utilisateur

Contec

Contec PT-S959SDLX Series Manuel utilisateur

Contec

Contec IPC-PT/MV10 Series Manuel utilisateur

Contec

Contec IPC SERIES Manuel utilisateur

Contec

Contec PANEL-PC 955 Series Manuel

Contec

Contec PT-S959 Series Manuel utilisateur

Contec

Contec 12.1 Manuel utilisateur

Contec

Contec PT-S3000HX-DC Series Manuel utilisateur

Contec

Contec DaVinci Manuel utilisateur

Contec

Contec PT-955LX-DC5000 Manuel utilisateur

Contec

Contec PT-310LS Manuel utilisateur

Contec

Contec PT-E831H Manuel utilisateur

Contec

Contec PT-S959SDHX Manuel utilisateur

Contec

Contec BX220 Series Manuel utilisateur

Contec

Contec 40 Series Manuel utilisateur

Contec

Contec PT-955SLX Manuel utilisateur

Contec

Contec PT-D2515 Manuel utilisateur

Contec

Contec PT-E731 Manuel utilisateur

Contec

Contec IPC-PT/MV15 Series Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur