Contec IPC-DT/L440(PC)TA Manuel utilisateur
IPC Series
FLAT PANEL DISPLAY
IPC-DT/L440(PC)TA,
IPC-DT/L440(PC)TB
User's Manual
CONTEC CO.,LTD.
User’s Manual i
Copyright
Copyright 2003 CONTEC CO., LTD. ALL RIGHTS RESERVED
No part of this document may be copied or reproduced in any form
by any means without prior written consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep
current the information contained in this document.
The information in this document is subject to change without
notice.
All relevant issues have been considered in the preparation of this
document. Should you notice an omission or any questionable item
in this document, please feel free to notify
CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no
responsibility for any errors that may appear in this document nor
for results obtained by the user as a result of using this product.
Trademarks
MS, Microsoft, MS-DOS and Windows are trademarks of Microsoft
Corporation. Other brand and product names are trademarks of their
respective holder.
ii User’s Manual
Table of Contents
Copyright.......................................................................... i
Trademarks...................................................................... i
Table of Contents............................................................ ii
1.Introduction.....................................................................1
Features.......................................................................1
Limited One-Year Warranty........................................2
How to Obtain Service.................................................2
Liability........................................................................2
Handling Precautions..................................................3
About the Manual........................................................4
2.Specifications...................................................................5
Function Specifications ...................................................5
General Specifications.....................................................6
Optical Display Specifications.........................................7
3.Outside Dimensions and Part Names.............................9
Outside Dimensions.........................................................9
Part Names ....................................................................10
Connector Dimensions and Names...........................11
Panel Link Connector................................................12
AC Adapter Connector (DC-IN Connector)...............13
External Power Supply Connector............................14
4.Installation Procedure...................................................15
Installation Cautions.....................................................18
5.Connection to the Host Computer.................................19
System Configuration and Connection Procedure .......21
6.Touch Panel....................................................................23
7.Options...........................................................................25
1. Introduction
User’s Manual 1
1. Introduction
This product is a 12.1 inch TFT color LCD display for desktop or
wall-mounted use. The display complies with the Panel Link
specification and is intended for use with a host computer such as
the CONTEC box computer series (BOXPC series) or SBC (single
board computer) products.
The following two versions of the display are available.
Base Model
IPC-DT/L440(PC)TA
Touch-panel model fitted with a polarizer (low reflection, high
contrast)
IPC-DT/L440(PC)TB
Features
- Full-bright, wide-angle-of-visibility type of liquid crystals
capable of displaying up to 262,144 colors
- At only 35mm thick, the display is suitable for both wall mounting
and desktop use.
- Equipped with a quick-response analog touch panel
- Uses the Panel Link I/F specification which permits a cable length
up to 5m.
- An optional AC adapter (IPC-ACAP12-01) is available to run the
display from the AC power supply.
- An optional stand kit (IPC-SND-02) is available to use as a
desktop display.
* For the host computer to be used with the display or its options,
contact your local CONTEC branch or sales office.
1. Introduction
2User’s Manual
Limited One-Year Warranty
CONTEC Interface boards are warranted by CONTEC CO., LTD. to
be free from defects in material and workmanship for up to one year
from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned
freight prepaid with a copy of the original invoice and a Return
Merchandise Authorization to the distributor or the CONTEC group
office, from which it was purchased.
This warranty is not applicable for scratches or normal wear, but
only for the electronic circuitry and original boards. The warranty is
not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the
original invoice is not included, in which case repairs will be
considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a
copy of the original invoice. Please obtain a Return Merchandise
Authorization Number (RMA) from the CONTEC group office
where you purchased before returning any product.
* No product will be accepted by CONTEC group without the
RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product.
In no event will the warrantor be liable for any incidental or
consequential damages due to such defect or consequences that arise
from inexperienced usage, misuse, or malfunction of this device.
1. Introduction
User’s Manual 3
Handling Precautions
Take the following precautions when handling this board.
-This display is made of the precise electric parts, so do not use or
store it in the vicinity of impulse or vibration.
- This product is not intended for use in aerospace, space, nuclear
power, medical equipment, or other applications that require a
very high level of reliability. Do not use the product in such
applications.
- If you utilize this product in such usages where high reliability and
safety are required as on the trains, vessels, automotives or crime-
or disaster-prevention devices, contact your retailer.
- Do not use or store the product in a location exposed to extremely
high or low temperature or susceptible to rapid temperature
changes.
Example: - Exposure to direct sun
- In the vicinity of a heat source
- Do not use the product in extremely humid or dusty locations.
- Although the display cable connector is able to rotate, it is not
designed to be rotated continuously. Do not rotate the connector
frequently as this may cause a fault.
- Never disconnect the display cable when the host computer is
turned on. To avoid damage to the display, turn off the computer
before inserting or disconnecting the display cable.
- In the event of failure or abnormality, contact your retailer.
- The display brightness may deteriorate with extended use. The
operating life of the backlight (50% of initial brightness) is 50,000
hours (when permanently illuminated at the rated temperature of
25°C).
- Do not use any sharp-pointed object such as a mechanical pencil
to touch the touch panel. Doing so may scratch the touch panel,
resulting in malfunctions.
- Do not subject the touch panel to shock as doing so may break it.
- When the surface or frame of the touch panel has become dirty,
wipe it with neutral detergent. Do not wipe the touch panel with
thinner, alcohol, ammonia, or a strong chlorinated solvent. Use a
protective sheet (available as an option) if the touch panel is used
where it can easily collect dust and dirt.
- This display does not support MS-DOS or Windows 3.1.
1. Introduction
4User’s Manual
- Although the display cable connector is able to rotate, it is not
designed to be rotated continuously. Do not rotate the connector
frequently as this may cause a fault.
- A characteristic of analog touch panels is that the resistance varies
with time and with changes in the surrounding conditions
(temperature and humidity). This may cause the detected touch
position to become misaligned. If this happens, recalibrate the
touch panel and update the calibration data.
- Displaying the same image on the screen for a long period of time
may cause "burn-in*". To prevent burn-in, periodically change
the displayed image to prevent the same image from being
displayed continuously. (* Burn-in: Acharacteristic of LCD TFT
displays is that, if the same image is displayed for a long period of
time, electric charge remains builtup in the LCD elements leaving
a ghost image visible when a different image is displayed.)
About the Manual
This manual consists of the following chapters :
Chapter 1 Introduction
Chapter 2 Specifications
Chapter 3 Outside Dimensions and Part Names
Chapter 4 Installation Procedure
Chapter 5 Connection to the Host Computer 19
Chapter 6 Touch Panel
Chapter 7 Options
2. Specifications
User’s Manual 5
2. Specifications
Function Specifications
Table 2.1. Function Specifications
Item IPC-DT/L440(PC)TA IPC-DT/L440(PC)TB
Assembly type Desktop *1 or wall hanging
Screen size 12.1 inches
Number of pixels 800 x 600 dots
Display type TFT color LCD
Number of colors 262,144 colors
Brightness control Adjustable with the volume on the
side
Backlight control Possible (Software control)
Cable length 2m or 5m (use the special-purpose display cable sold separately.)
Resolution 4096 x 4096 (Emulated in 800 x 600)
Detection method Resistive-layer analog method
Touch life
expectancy More than a million times
(Load: 300gf ±100gf, Speed: 2 times/sec, by mechanical keying in)
Touch panel
interface 20-core, half-pitch connector on the back(shared with display signals)
Touch panel
Polarizer *2 No Yes
Power consumption +12VDC±0.5V 1.3A (Max.)
*1 When using on the Desktop, the optional stand IPC-SND-02 is required.
*2 The touch panel model fitted with a polarizer (IPC-DT/L440(PC)TB) has low reflection and high contrast.
(However, the display brightness is 9% less than when the polarizer is not fitted.)
2. Specifications
6User’s Manual
General Specifications
Table 2.2. General Specifications
Condition Specifications
Environment
Ambient operating
temperature 0 - 45°C
Ambient storage
temperature -10 - 60°C
Ambient humidity 20 - 90%RH (No condensation )
Floating dust Normal
Corrosive gas None
Line noise AC line: 2 kV (IEC1000-4-4Level3, EN61000-4-4Level3)
(Host: IPC-BX/M600(PCW))
Noise
resistance
Electrostatic
withstanding
voltages
Contact: 4 kV (IEC1000-4-2 Level 2, EN61000-4-2 Level 2)
Airborne: 8 kV (IEC1000-4-2 Level 3, EN61000-4-2 Level 3)
Waterproofing and dust-
proofing - (An optional protective sheet is available for the screen)
Structure
Major dimensions (mm) 320(W) x 35(D) x 272(H)
Weight About 1.6kg
2. Specifications
User’s Manual 7
Optical Display Specifications
Table 2.3. Optical Display Specifications
Item Condition Min. Standard
φ= 180° 30deg 50deg
Visual angle
(vertical) φ= 0° 40deg 70deg
φ= +90° 40deg 70deg
Visual angle
(horizontal)
CR≥10
φ= -90°
Display in
monochrome
40deg 70deg
Surface
brightness
(at center) Display in white 280cd/m2350cd/m2
Contrast ratio (CR) = Brightness at screen center with white displayed
Brightness at screen center with black displayed
Left
( φ=
-
90o )
Z
Y
X
Top
( φ= 180o )
Right
( φ= 90o )
Bottom
( φ = 0o )
( θ= 0o )
Measurement direction
θ
Module
φ
Figure 2.1. Viewing Range Definition
Note! The above optical specification data shows optical characteristics
of the liquid crystal in the display; the data does not represent the
actual view on the display or its viewing angles.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Contec Moniteur
Contec
Contec IPC-DT/L40S(PC)T Manuel utilisateur
Contec
Contec IPC SERIES Manuel utilisateur
Contec
Contec IPC-DT 61 Manuel utilisateur
Contec
Contec S71VT-DC1 Manuel utilisateur
Contec
Contec PM10 Manuel utilisateur
Contec
Contec IPC-DT Manuel utilisateur
Contec
Contec IPC SERIES Manuel utilisateur
Contec
Contec FPD-S71VT-DC1 Manuel utilisateur
Contec
Contec FPD-H21XT-AC Manuel utilisateur
Contec
Contec GPD-U64EM-DC2 Manuel utilisateur
