Faults must be immediately rectified.
Carry out the switch on, and switch off operations in accordance with this user guide.
Before switching on the machine make sure that no-one can be endangered when the
machine starts up.
Never operate the machine when it’s in its upright position.
All persons in the proximity of the machine must wear ear and eye protection as well as
safety shoes. In addition the machine operator must wear close-fitting protective
clothing.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the
machine if there are any foreign objects stuck into the surface. Such objects must be
removed prior to operation of machine
2.4 Electrical safety
Work on electrical equipment may only be undertaken by a skilled electrician or by
trained persons under the supervision of a skilled electrician as well as in accordance
with the local electrical engineering regulations.
The electrical equipment for the plant must be inspected regularly. Defects must be
rectified immediately. Call a skilled electrician or out customer services.
A second person must be in attendance whilst the electrical engineer is working on the
equipment.
The work area must be secured against any third party entering the work area. Follow
local electrical engineering regulations while working on the machine. Never leave a
machine unattended. Use only tools that are insulated against electricity.
Only start work after you are familiar with the electrical engineering regulations that
apply to the local area.
2.5 Service Safety
Read and understand the instructions contained in the manual delivered with the
machine before servicing or maintaining
Familiarize yourself with the location and proper use of all controls and safety devices
before servicing or maintaining.
Contact local dealer for additional training if necessary.
Do not allow improperly trained people to service or maintain the machine. Personnel
servicing or maintaining the machine must be familiar with the associated potential
risks and hazards.
Do not attempt to clean or service the machine while it is running. Rotating parts can
cause severe injury.
Do not remove blades while the machine is hanging overhead.
Disconnect the spark plug on machines equipped with gasoline engines, before
servicing, to avoid accidental start-up.
When replacement parts are required for this machine, use only our replacement parts
or those parts equivalent to the original in all types of specifications, such as physical
dimensions, type, strength, and material.
