CONIC WS740 Manuel utilisateur

CONIC WS740

User manual

P lease read the instru c tion s carefu lly before use

TABLE OF CONTENTS

1. S a fety I nst r uctions ....................................... 2 - 4

2. Techn ic al Specifications.................................. 4 - 5

3. How To Control The Unit ................................ 5 - 8

4. DMX Channels......................................... 8 - 10

5. shape .................................................. 1 0

6 . Trouble shooting ......................................... 15

7. Fixture Cleaning ......................................... 16

statement

The product has well capability and intact packing when

leave factory. All of the user should comply with warning item

and manual, any misuse cause of the damages are not included in

our guarantee, and also can not be responsible for any

malfunction & problem owing to ignore the manual.

1. Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to

another user, be sure that they also receive this instruction booklet.

yUnpack and check carefully there is no transportation damage

before using the unit.

yBefore operating, ensure that the voltage and frequency of

power supply match the power requirements of the unit.

yIt’simportant to ground the yellow/green conductor to earth

in order to avoid electric shock.

yThe unit is for indoor use only. Use only in a dry location.

yThe unit must be installed in alocation with adequate

ventilation, at least 50cm from adjacent surfaces. Be sure that no

ventilation slots are blocked.

yDisconnect main power before replacement or servicing.

yMake sure there are no flammable materials close to the unit while

operating as it is fire hazard.

yUse safety cable when fixes this unit. DO NOT handle the unit by

taking its head only, but always by taking its base.

yMaximum ambient temperature is Ta: 40℃. DO NOT operate it where

the temperature is higher than this Unit surface temperature may reach

up to 85℃. DO NOT touch the housing bare-hand during its operation.

Turn off the power and allow about 15 minutes for the unit to cool

down before replacing or serving.

yIn the event of serious operating problem, stop using the unit

immediately.Never try to repair the unit by yourself. Repairs carried

out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always

use the same type spare parts.

yDO NOT touch any wire during operation as high voltage might be

causing electric shock.

Warning:

yTo prevent or reduce the risk of electrical shock or fire, do not expose

the unit to rain or moisture.

yDO NOT open the unit within five minutes after switching off.

yThe housing, the lenses, or the ultraviolet filter must be

replaced if they are visibly damaged.

Caution:

There are no user serviceable parts inside the unit. DO NOT open the

housing or attempt any repairs yourself. In the unlikely event your

unit may require service, please contact your nearest dealer.

Installation:

The unit should be mounted via its screw holes on the bracket. Always

ensure that the unit is firmly fixed to avoid vibration and

slipping while operating. And make sure that the structure to

which you are attaching the unit is secure and is able to support a

weight of 10 times of the unit’s weight. Also always use a safety cable

that can hold 12 times of the weight of the unit when installing the

fixture.

The equipment must be fixed by professionals. And it must be fixed at a

place where is out of the touch of people.

2. Technical Specifications

Light Sources: 7x 40W 4IN1 RGBW LED

Beam Angle: 7°~ 45°

Power Consumption: 250W

Power Voltage: AC 100-240V, 50/60Hz

Dimension: 195*166*334 mm

Net Weight: 6 Kgs

Control

DMX Channel: 17 /21CH

Control Modes: DMX512/mater-Slave/Auto Run/Music/RDM

Pan/Tilt

Pan/Tilt: 540°/ 270°

Pan/Tilt Resolution: 8/16 bit

Construction

Display: LCD colorful Display

Data In/Out socket: 3-pin XLR sockets

Power Socket: Powercon in/out

Protection Rating: IP20

Features

Motorized liner zoom system, zoom range: 7°~45°

Outstanding color macro effect

Dimmer: 0~100% smooth dimming

Variable strobe effects

Fast, quiet operation and flicker free

3. How To Control The Unit

The DMX512 is widely used in intelligent lighting control,with a DMX

512 controller.connect several lights together,dmx in and dmx out,

3 pin XLR connectors: Pin 1: GND, Pin 2: Negative signal (-), Pin 3:

Positive signal (+)

Display:

DOWN To go backward in the selected functions

MENU To select the programming functions

Addres

Address 001～

512

Address setting

001 512

1.DMX51

Console

control

2.Aut

1.Maste

2.Alon

3.Soun

1.Maste

2.Alon

4.Manua

1.Pan:0-25

2.Tilt:0-25

3.Focus:0-25

4.Red:0-25

5.Green:0-25

6.Blue:0-25

7.White:0-25

8.Strobe:0-25

uP To go forward in the selected functions

Se t DM Addres s Code

"Menu" to "Set DMX Address",and press"ENTER"

enter into

2 Show "Set DMX Address DMX Address:001001",Press the "UP and

DOWN"

keys to amended

"ENTER"keys to save and Exit,Press the"MENU"Keys does

not save and Exit

ENTER To confirm the selected functions

1 Press "Menu"

"ENTER" keys to

3 Press "ENTER"

Channe

1.17C

2.22C

Inver

1.Pan

Invert

1.NO,2.YE

2.Tilt

Invert

1.NO,2.YE

Soun

0-10

Sound

sensitivity

Degre

1.540,2.36

signal

1.black

out

2.hol

Fan

set

1.auto, 2.high,

3.low

Rese

1.N

Rese

2.YE

Defaul

3.Ye

Factory

setting

4.N

Infor

1.Soft

V1.0

Show the version

number

2.Temp

____℃

Show the temperature

led

Adju

Pass

word

***

1.Pa

0-255Pan fine

control

2.Til

0 -255Tilt fine

control

3.Focu

0-255 Zoom fine

control

4.Re

0-25

5.Gree

0-25

6.Blu

0-25

7.Whit

0-25

Chann

Functio

Descriptio

Valu

pan

0----25

Pan fine

0----25

Tilt

0----25

Pan fine

0----25

Speed of Pan/

from fast to

0----25

Strob

Turn on the light

0----

Synchro strobe speed slow to

fast (1HZ-25HZ)

4----20

Random

204----25

Dimme

from dark to

bri h

0----25

Dimming

mode

0----4

mode

50----9

mode

100----14

mode

150----25

Zoo

From near to

far

0----25

from dark to

0----25

from dark to

0----25

from dark to

bri h

0----25

4. DMX Channels

DMX channel´s functions and values (17 DMX channels)

17 channel mode：

from dark to

bri h

0----25

Static

color

0----1

R100%，G

16----3

36---5

R0%,G100%,B

56---7

R0%,G

76---9

96---11

R100%,G up,B

116---13

R 100%down,G Up,B

136--15

R down,G

156---17

R100%,G100%,B100%,

W 100%

176--19

2800

196--20

3200

201--20

4000

206--21

4500

211-21

5000

216-22

5600

221-22

6500

226-23

7000

231-23

7500

236-24

8000

241-25

Moving

color

f i

0----4

Skip

50----9

Table des matières

Autres manuels CONIC Matériel de DJ

CONIC

CONIC RIB1940Z Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur