Computime S-210 Manuel utilisateur

Computime S-210

Electronic Time Recorder

Instruction Manual

CONTENTS

1. Introduction 3

1.1 Package content 4

1.2 Parts identification 4

1.3 Setting select ke 5

2. Function options 6

2.1 Quick codes’ selection 6

2.2 Detail codes’ selection 6

3. Be read for setting 7

4. Function setting 8

4.1 - 4.5 Setting of ear, month, date, hour, minute 8

4.6 Setting the regular time signal 8

4.7 Setting the date changing time 9

4.8 Setting the shifting time 9

4.9 Setting the 2 colors printing time 10

4.10 Setting the extension time signal 10

4.11 Adjusting printing position 10

4.12 Detecting front/back of time cards 10

4.13 Setting the Monthl , Weekl pa period ending da 11

4.14 Setting the S/W solstice start (month and da ) 12

4.15 Setting the S/W solstice start (hour and minute) 12

4.16 Setting the S/W solstice end (month and da ) 12

4.17 Setting the S/W solstice end (hour and minute) 12

5. All reset 13

6. Trouble shooting 13

7. Replacing ribbon cartridge 14

8. Cautions 14

9. Specifications 15

10. Error Code 15

- 2

1. Introduction

In order to operate our time recorder accuratel and efficientl with a longer

product life, please read this manual thoroughl .

Models

Functions

LCD

nalogue

LCD Display

Clock

Face

Two color printing

Time Signal

Perpetual calendar

Back up battery

uto In-Out adjustment

External Signal Unit

Data memory backup

during

power

failure

Check time card's front or back

automatically. if insert the

wrong side, will quit by the

machine.

- 3

1.1 Package Contents

Unpack the time recorder and check its contents to ensure that the time

recorder unit and all accessories as shown below are included.

Time Recorder Instruction Manual ke

1.2 Parts identification

(a) Keypad

( )LCD on the top

- 4 -

1.3 Setting select ke

to increase the set value b 1

to decrease the set value b 1

Enter to save the set value & enter the next step

Back to backspace the set value

Clear to cancel the set value

Program switch Normal/ Programming

Batter Batter On/Off

Reset Reset

- 5

2. Function options

The function options will be started b unlocking and removing the lid from

the time recorder with the program switch to right side. Here are total 37 pcs

function codes, which are from “00, 01, 02…” to “ 37” , different code is for

different setting. In the case, press“Enter” to select the codes forward or

press “Back” to select backward for functions setting expected and, press

“+” to increase the value as well as press “－” to decrease the value.

2.1 Quick codes’ selection:

00-04---Setting the time (Year, Month, Date, Hour, Minute)

05-11---Setting the regular time signal

12-------Setting the da changing time

13-18---Setting the shifting time

19-24---Setting the 2-color printing

25-30---Setting the extension time signal

31-------Printing position adjustment (up/down)

32-------Detecting front/back of card

33-------Setting the Monthl ,Weekl pa period ending da

34-------Setting the S/W solstice start（month and da ）

35-------Setting the S/W solstice start（hour and minute）

36-------Setting the S/W solstice end（month and da ）

37-------Setting the S/W solstice end（hour and minute）

2.2 Detail codes’ selection:

Code

Functions

Setting the Year

Setting the Month

Setting the Date

Setting the Hour

Setting the Minute

- 6 -

Setting the Duration of time signal(Seconds)

Setting the time of 1

group of ringing

Setting the time of 2

group of ringing

Setting the time of 3

group of ringing

Setting the time of 4

group of ringing

Setting the time of 5

group of ringing

Setting the time of 6

group of ring

Setting the date changing time

Setting the time of shifting to 1

column

Setting the time of shifting to 2

column

Setting the time of shifting to 3

column

Setting the time of shifting to 4

column

Setting the time of shifting to 5

column

Setting the time of shifting to 6

column

Setting the time of 1

group of changing color(Red)

Setting the time of 2

group of changing color(Black)

Setting the time of 3

group of changing color(Red)

Setting the time of 4

group of changing color(Black)

Setting the time of 5

group of changing color(Red)

Setting the time of 6

group of changing color(Black)

Setting the time of 7

group of ringing

Setting the time of 8

group of ringing

Setting the time of 9

group of ringing

Setting the time of 10

group of ringing

Setting the time of 11

group of ringing

Setting the time of 12

group of ringing

Adjusting Printing position (up/down)

Detecting front/back of card

Setting the Monthl ,Weekl pa period ending da

Setting the S/W solstice start（month and da ）

Setting the S/W solstice start（hour and minute）

- 7

rea

sett

ing

Setting the S/W solstice end（month and da ）

Setting the S/W solstice end（hour and minute）

1. Power Suppl

(1) Stable power source are highl recommended.

(2) Please check the correct voltage & power cord before uses.

Top

Cover

Remove the top cover prior to set program or change the ribbon case

Open the Top Cover b using the ke provided and remove the top cover.

4. Function Setting

After removing the lid from the time recorder,

turn the program switch to right side to enter setting condition. Press “Enter” to

select the codes forward or press “Back” to select backward for functions

setting expected and, press “+” to increase the value or press “－” to decrease

the value and, press “Enter” to save the set value and start the next setting.

Sett

ing

Year

Turn the program switch to right side, the Codes will begin

from “00”

(00 displa on the left corner indicates the program Code)，

The digital displa reads 2006 indicates ear 2006，The ear

“06” flashes on the right of the digital displa , press the +

or – button to set the ear. Press Enter to register the setting.

4.2 Setting the Month

Press Enter or Back to enter the program Code 01,

press + or – button to set the month. Press Enter again to

- 8

4.3 Setting the date

Press Enter or Back to enter the program Code 02,

press + or – button to set the da . Press Enter again to

4.4 Setting the Hour

Press Enter or Back to enter the program Code 03,

Press + or – button to set the Hour. Press Enter again to

4.5 Setting the Minute

Press Enter or Back to enter the program Code 04,

press + or – button to set the Minute. Press Enter again

to register the setting value.

4.6 Setting the regular time signal (0-99Seconds)

Press Enter or Back to enter the program Code 05,

Press + or – button to set time signal duration and the initial value (10

seconds) will appear.

The duration can be set from 0~99 seconds,

Press Enter again to register the setting value and enter code

06 so as to setting the time of 1

ringing

Press + or – button to set the Hour.

Press Enter again to register the setting value.

Press + or – button to set the Minute.

Press Enter again to register the setting value.

Doing the same as above to enter code 07, 08, 09, 10, 11

and complete the setting of 2

, 3

, 4

, 6

ring times.

4.7 Setting the Date Change time

Press Enter or Back to enter the program Code 12,

- 9

–

butt

the

Hou

n to

r the

ett

value.

press

or – button to set the Minute. Press Enter again to

Note: The default is 00:00, the da and printing line will change to the next at

the time.

4.8 Setting the shifting time

Press Enter or Back to enter the program Code 13,

Press + or – button to set the Hour.

Press Enter again to register the setting value.

Press + or – button to set the Minute.

Press Enter again to register the setting value.

Doing the same as above to enter code 14, 15, 16, 17, 18

and complete the setting of 2

, 3

, 4

, 6

shifting

times. The format below is for reference:

Print Column

Function

A.M. IN

A.M. OUT

P.M. IN

P.M.OUT

O.T. IN

O.T. OUT

4.9 Setting the 2-color printing

Press Enter or Back to enter the program Code 19,

Press + or – button to set the Hour.

Press Enter again to register the setting value.

Press + or – button to set the Minute.

Press Enter again to register the setting value.

Doing the same as above to enter code 20, 21, 22, 23, 24 and complete the

setting of 2

, 3

, 4

, 6

change color times if necessar .

- 10

Table des matières

Autres manuels Computime Horloge

Computime

Computime S-990 Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur