COMPRO CP480 Manuel utilisateur

User’s Guide

V1-110608

P/N: 3GA0310723

Model No.

CP480

Before attempting to set up or operate this camera,

please read this user's guide and retain it for future

reference.

Analog Video Camera

Trademark

Compro Technology is the registered trademark of Compro Technology

Inc. All other company and product names mentioned in this document are registered

trademarks of the respective companies.

Restriction

No part of this document may be copied or reproduced in any form or by any means

without the prior written consent of Compro Technology, Inc.

Disclaimer

Compro Technology makes no warranties with respect to this documentation and

disclaims any implied warranties of merchantability, quality, or tness for any particular

purpose. The information in this document is subject to change without notice.

COMPRO reserves the right to make revisions to this publication without obligation to

notify any person or entity of any such changes.

Revision History

2011/03/30 Updated technical specs

2011/01/28 Original version

Compro Technology Inc.

www.comprosecurity.com

Tel. +886 2 2918 0169, Fax +886 2 2915 2389

3F, No.12, Alley 6, Lane 45, Pao Shin Road,

Hsintien District, New Taipei City 231, Taiwan

Support e-mail: suppor[email protected]

Compro CP480 - User's Guide

Contents

Table of Contents

Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Regulatory Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation & Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Power Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Adjusting Zoom and Focus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connecting Video and Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Accessing the Operation Joystick. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setup Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Camera Operation Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CP480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Compro CP480 - User's Guide

2Important Notices

Regulatory Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the following

measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthe

receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

To assure continued compliance, any changes or modications not expressly approved

by the party responsible for compliance could void the user's authority to operate this

equipment.

Safety Rules

• Thecameraoughttobeinstalledbyaqualiedtechnician.

• Placethecameraonalevelsurfacewheneverpossible.

• Donotdropthecamerabodytotheground;itmaycausethedamagetomainparts.

• Pleasedonotdisassembleorremodeltheproduct;itmaycausedamageorre.

• Donotshake,moveordisturbthecamerawhenitisinoperation,assuchactions

may result in the malfunction of the device.

• Powerothecameraassoonasitisfoundsmokingorsmeltunusual.

• Pleasedonotplacethecameraaroundtheheatsources,suchastelevisionor

microwave oven.

Important Notices

Compro CP480 - User's Guide

Product Overview

Package Contents

Please check the package contents on your hand. If anything is missing, please don’t

hesitate to contact your local distributor.

1 2

8 97

Analog camera x 1

Wall mount x 1

Holder bracket x 1

Hexagonal screw x 6.

Washer x 8

Power terminal block x 1

Rubber spacer x 1

L-shaped hexagonal wrench for tilt adjustment x 1

User's Guide x 1

Product Overview

Compro CP480 - User's Guide

4Product Overview

Hardware Overview

Camera Layout

Side

Bottom Terminal

Connectors

Front

Lens cover – Remove the lens cover when you want to adjust zoom and focus.

Sunshield – Sunshield prevents overheating.

Cable fastener – Fasten the terminal cable.

IR LED – 30 built-in IR LEDs.

Lens – YOUNG Optics vari-focal lens, 3.7~12 mm

Light sensor – Feeds information on environmental lighting condition to the camera

Screw holes for holder bracket – Allow you to install the holder bracket.

Operation joystick (cover removed) – Let you perform various settings in the OSD

menu.

Video output terminal – Connect to a BNC video cable.

Power input terminal – A 3-pin power connector.

Compro CP480 - User's Guide

Installation & Connections

Power Connector Pinout

The following indicates the pinout of the camera’s terminal power connector.

Pin Function

1 + 12V DC

2COM

3 24V AC

Adjusting Zoom and Focus

Installation & Connections

Follow the steps below to adjust the zoom and focus of the camera's lens.

1. Detach the camera's sunshield by loosening the top screws.

2. Turn the front cover counterclockwise to remove the front cover. Unlock the

zoom and focus lever labelled 1 and 2 by turning the knob counterclockwise.

Then move the levers to adjust the zoom and focus. Use no.2 lever for adjusting

focal length, and no.1 lever for ne-tuning focus.

3. Tighten the levers after the adjustment. Then re-install the lens cover and

sunshield.

Note:

The camera comes with two desiccant packs inside the housing,

one at the front end and the other at the rear end. Make sure you

put them in place whenever you open the housing to protect

against excessive humidity.

Compro CP480 - User's Guide

6Installation & Connections

Installing Bracket

The camera comes with a wall bracket in the package. The following describes how to

secure the bracket to the camera body.

1. Thread the terminal cable through the holder bracket's hole and then secure

the holder bracket to the bottom of the camera by xing a hexagonal screw into

screw hole 1 and 2. Make sure you use two washers in between the screws and

the holder bracket to avoid possible damage to the camera.

Holder Bracket

2. Place the rubber spacer between the camera and the mount to provide

insulation. Then thread the camera's terminal cable through the tilt table's hole

(labelld ) and out the hole on the side of mount base (labelld ). Then use

four hexagonal screws to fasten the mount to the holder bracket.

Rubber Spacer

Tilt Table

Connecting Video and Power

1. Use a BNC video cable to connect the terminal BNC connector from the camera

to a mating BNC connector.

2. Attach the power adapter (optional accessory) to the terminal power connector

Compro CP480 - User's Guide

Installation & Connections

from the camera. The recommended adapter specications is DC 12V/500mA or

AC 24V/500mA. Then connect the power plug to a power outlet.

Analog Camera

Power Adapter

Monitor

Accessing the Operation Joystick

The operation joystick at the bottom of the camera body (on the Compro logo side) is

used to perform settings in the OSD menu. To access the operation joystick, you need to

remove its protective cover rst by loosening its screws.

Button Operation

Joystick Up Move the cursor up

Joystick Down Move the cursor down

Joystick Left Change to the previous setting for

the selected menu item

Joystick Right Change to the next setting for the

selected menu item

Press on Joystick

(setting button)

CalluptheOSDmenu;set;entera

submenu

Compro CP480 - User's Guide

8Operating the Camera

Setup Menus

Prior to using this camera, enter the setup menu and make the appropriate settings

for each item in accordance with the condition of the camera's monitoring area. Listed

below is the structure of the setup menu.

Setup Item Description Available

Options Submenu Items

LENS

Lets you select the iris

adjustment mode of your

lens.

AUTO /

MANUAL

Under 'AUTO': type,

mode, speed

SHUTTER /

AGC

Allows you to congure

the shutter speed and

auto gain control function.

AUTO /

MANUAL

Under 'AUTO': mode

and brightness for

high/low luminance

Under 'Manual': mode,

shutter, AGC

WHITE BAL Provides adjustment on

white balance.

ATW / PUSH

/ USER1 /

USER2 /ANTI

CR / MANUAL /

PUSH LOCK

Under 'ATW': speed,

delay cnt, atw frame,

environment

Under 'USER1/2':

b-gain, r-gain

Under 'MANUAL': level

BACKLIGHT

Enables or disables the

back light compensation

function.

OFF / BLC / HLC N/A

PICT

ADJUST Species video properties.

MIRROR /

BRIGHTNESS

/ CONTRAST /

SHARPNESS /

HUE / GAIN

Under 'MIRROR': o, on

Under 'BRIGHTNESS/

CONTRAST/

SHARPNESS/HUE/

GAIN': 0~255

ATR

Lets you switch on/o

the ATR (Adaptive Tone

Reproduction) function.

OFF / ON Under 'ON': luminance,

contrast

MOTION

DET

Congures the motion

detection mode. OFF / ON

Under 'ON': detect

sense, block disp,

monitor area, area sel,

top, bottom, left, right,

right

Operating the Camera

Table des matières

Autres manuels COMPRO caméscope

COMPRO

COMPRO CP180 Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Panasonic

Panasonic NV-VS40B Manuel utilisateur

Canon

Canon RC 260 Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

JVC

JVC GR-SXM68AC Guide de démarrage rapide

Panasonic

Panasonic AG-HMC152EN Manuel utilisateur

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Panasonic

Panasonic HDC-SD100 Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

JVC

JVC AA-V15EG Manuel utilisateur

Canon

Canon LEGRIA HV40 Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

Panasonic

Panasonic NVM40 Manuel utilisateur