Compex WP54AG 1b Manuel utilisateur

Quick Install Guide

Wireless-AG 54Mbps XRTM

Access Point

(Compatible with 802.3af Standard PoE)

WP54AG 1b

Table of Contents

1: Introduction...................................................................................1

Packaging Content............................................................................... 2

2: Let’s Get Going-Hardware Setup ...............................................3

3: Access to Web-based Interface ................................................6

Access to the Web interface with uConfig ......................................... 6

Access to the Web interface manually .............................................. 9

4: Panel Views and Descriptions...................................................11

5: Technical Specifications ...........................................................14

WARRANTY REGISTRATION CARD .....................................................19

Chapter 1 Introduction

1: Introduction

The Compex WP54AG Wireless-AG 54Mbps XR™ Access Point is a high-

performance AP that is designed for enterprise and public access application.

Embedded with Atheros chipset, it boasts network robustness, stability and

wider coverage for network connectivity. Compliant with IEEE 802.11a/b/g

standards, WP54AG supports high-speed data transmission of up to 54Mbps at

2.4GHz.

WP54AG is capable of operating in 6 different modes like Access Point Bridging,

Access Point Client, Gateway, Wireless Routing Client, Point-to-Point and Point-

to-Multi Point that makes it suitable for a variety of wireless applications. By

supporting multiple modes, WP54AG is able to suit the different deployment

requirements. Network administrators can also make use of the SNMP feature

included in the web management application for easy user setup. Equipped

with an SMA antenna and Long Range Parameter Settings, WP54AG provides a

wider coverage for your network. An integrated Power over Ethernet (PoE)

allows WP54AG to be used in areas where power outlets are not readily

available.

To protect your security and privacy, WP54AG is armed with many enhanced

wireless security features such as Wi-Fi Protected Access (WPA), WPA2, MAC

Address Filtering, IEEE 802.1x Authentication and 64/128-bit WEP (Wired

Equivalent Privacy) and even WPA in Client Modes to ensure privacy for the

heterogeneous mix of users within the same wireless LAN, while maintaining full

access to the establishment’s resources.

WP54AG also incorporates unique features such as – the Parallel Broadband

feature that allows bandwidth aggregation and fail-over redundancy

capability. Long-Range parameter settings provides WP54AG with the ability to

auto-calculate parameters such as slot time, ACK time-out and CTS time-out on

the wireless device based on range requirements entered to achieve a longer

range. Spanning Tree Protocol (STP) that provides the wireless network with

extra redundancy and reliability; the network will auto-reconfigure when there

are changes to the network connections. The Pseudo VLAN feature enables the

creation of wireless isolated nodes or workgroups between wireless clients to

increase network privacy in a wireless LAN installation.

Chapter 1 Introduction

Packaging Content

Actual product appearance may slightly differ depending on the hardware

version.

1 x Compex WP54AG

1 x RJ45 Ethernet Straight Cable

1 x Antenna 1 x Product CD

1 x Read-Me-First Note

Chapter 2 Let’s Get Going - Hardware Setup

2: Let’s Get Going-Hardware Setup

Compex WP54AG can be powered using the standard PoE Injector. This

accessory supplies operational power to the wireless AP via the Ethernet cable

connection. The installation process is described below.

Connect the external antenna to the SMA

connector of Compex WP54AG.

Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet

socket of the Injector and the other end to one of the LAN ports of Compex

WP54AG.

Warning.

When one port is used for PoE, the other port cannot connect to any other

network device.

Maximum length of the RJ45 Category 5 cable is 100 metres.

Chapter 2 Let’s Get Going - Hardware Setup

Next, connect the RJ45 Ethernet cable attached to the standard PoE Injector

to your PC’s Ethernet network adapter.

Once you have finished configuring your WP54AG, you can connect the PoE

Injector’s RJ45 Ethernet cable to your network device, such as to a switch or

hub.

Chapter 2 Let’s Get Going - Hardware Setup

Connect the power adapter supplied in the standard PoE kit to the main

electrical supply and the power plug into the socket of the injector.

Note:

The voltage and current supplied to the Compex WP54AG power adapter

and the standard PoE kit power adapter are different. Do not interchange the

power adapters.

Now, turn on your power supply. Notice that the Power and Port 2 (according

to the picture illustration) LEDs have lighted up. This indicates that the WP54AG

is receiving power through the PoE Injector and that connection between

Compex WP54AG and your PC has been established.

Chapter 3 Access to Web-based Interface

3: Access to Web-based Interface

There are two methods to access to the web-based interface of Compex

WP54AG:

1. Through the Compex Utility – uConfig

You can access to the web-based interface directly without having to

change the IP address of your PC.

2. Through your web browser

First, you will need to assign an IP address to your PC, such as

192.168.168.xxx, where x can be any value from 2 to 254, so that it is in the

same subnet as Compex WP54AG. Then, enter IP address of Compex

WP54AG in the address bar of Internet Explorer and press Enter.

Access to the Web interface with uConfig

Compex has developed a powerful uConfig utility that provides hassle-free

access to the web-based configuration page.

Insert the Product CD into your CD-ROM drive.

From the Utilities section, select to install the uConfig utility to your hard disk.

When the utility has been installed, double-click on the uConfig icon. The

following screen will appear, click on the Yes button to proceed.

Chapter 3 Access to Web-based Interface

Select NetPassage WP54AG in the Compex Products List section and click on

Open Web button. To retrieve and display the latest device(s) in the list, click

on the Refresh button.

Chapter 3 Access to Web-based Interface

This screen prompts you not to exit your uConfig program while accessing to

your web-based interface, or else you will fail to connect to your device. Click

on the OK button to proceed.

At the authentication page, click on the LOGIN! button to enter the main

configuration page. The default password is “password”.

Table des matières

Autres manuels Compex Point d'accès sans fil

Compex

Compex WP54G 1a Manuel utilisateur

Compex

Compex Netpassage WP54AG Manuel utilisateur

Compex

Compex NetPassage WP18 Manuel utilisateur

Compex

Compex WP54 Manuel utilisateur

Compex

Compex NETPASSAGE Series Manuel utilisateur

Compex

Compex WP54G 6E Manuel utilisateur

Compex

Compex MIMOJunior 802.11n Manuel utilisateur

Compex

Compex NETPASSAGE Series Manuel utilisateur

Compex

Compex Netpassage WPE54AG Manuel utilisateur

Compex

Compex Netpassage WPE54AG Manuel utilisateur

Compex

Compex NetPassage WPP54AG Manuel utilisateur

Compex

Compex NetPassage WPE54G Manuel utilisateur

Compex

Compex WPP54G Manuel utilisateur

Compex

Compex NetPassage WP18 1A Manuel utilisateur

Compex

Compex WP11B+ Manuel utilisateur

Compex

Compex WP54AG 1a Manuel utilisateur

Compex

Compex WPE54 Manuel utilisateur

Compex

Compex WP11A+ Manuel utilisateur

Compex

Compex WPP54 Manuel utilisateur

Compex

Compex NetPassage WPE54G Manuel utilisateur

Compex

Compex WP54G 1a Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur