CompeGPS TwoNav Aventura Manuel utilisateur
1
ENGLISH
1 Introduction
Thank you for purchasing TwoNav Aventura, the dual (for outdoor and in-car) GPS
navigating system that will help you enjoy the best assistance to orientate you in any
type of environment while carrying out any type of activity.
The TwoNav navigation mode can be changed by pressing on the tab on the top of
the Main Menu:
• Off-Road : Outdoor areas for practising open air activities do not usu-
ally have usable information for the automatic calculation of the route, so
cartography is only useful as a visual reference aid. In order to have avail-
able assistance for orientation, positional references must be used (way-
points, routes and tracks). You can create them yourself or obtain them from
different sources, such as friends, web pages or Internet forums.
• On-road : Road information maps (V-maps from CompeGPS) are
used to automatically calculate the road to be followed in order to reach our
destination. This route will take into account the available streets and will
provide detailed orientation through them by using visual and voice indica-
tions.
If you wish to begin using TwoNav quickly, read the following pages. To obtain further
information on the functions of this device do not forget to check the complete version
of the user manual, which can be found in the installation CD or by entering the Com-
peGPS (www.compegps.com) or TwoNav (www.twonav.com) web pages.
English
2
2 General description
2.1 The device
1. Touch screen
2. ON key
3. HOLD key
4. MENU key
5. PAGE key
6. MARK key
7. ESC. key
8. Zoom +
9. Zoom –
10. Joystick (OK / Activate cursor
mode) (Esc/ deactivate cursor
mode)
11. Mini-USB port
12. Serial port
13. SD HC Memory card reader (up
to 32GB)
14. Audio output
15. Operative System update button
key
16. Reset button
17. Stylus
18. Supporting hole
19. GPS outer aerial port
20. Opening ring
3
ENGLISH
2.2 On screen
General/On-road
1. Distance to next event
2. Next manoeuvre
3. Tool bar
4. Show/hide tools
5. Pan/Rotate map
6. Orientate map (north/course)
7. 2D/3D/3D+
8. Data pages
9. Data bar
10. Show/Hide Data Bar
11. Hour
12. Partial distance
13. Estimated time to destination
14. Height
15. Menu key
16. Status icons (enter state win-
dow)
17. Speed limit of present road
18. Re-centre (after moving the
map)
19. POI (Point of interest)
20. Current position
21. Manoeuvre indications
22. Calculated route
23. Zoom +
24. Zoom -
25. Scale rule
26. Next street
27. Present street
4
Off-road specics
28. Compass
29. Currently recorded track
30. Guide line (direction waypoint/
track)
31. Next waypoint
32. Loaded track
33. GOTO arrow (direction to follow)
34. Track name / Next Waypoint
35. Loaded route
2.3 Contextual menus
TwoNav uses Contextual Menus to enter the most adequate functions for each
moment and option in an easy and quick manner.
5
ENGLISH
To open the Contextual Menu of any element (track, map, waypoint…), press on it
for one second. You may open contextual menus on the following settings of the user
interface:
• Navigation window (map): Depending on the element on which you open
the Contextual, you may enter different functions.
• Data elds: When opening the Contextual on the data fields (on the data
bar or the data pages) you will be able to modify the available fields, set
an alarm or enter other functions that may change depending on the field
(reset, countdown, etc.).
• Lists: The Contextual Menu may be opened to see the different actions
to carry out on any given element (waypoints, routes, tracks and maps) by
clicking on its name from the data lists.
2.4 Shifting over lists
TwoNav uses a system of lists on the various situations: data (tracks, waypoints,
routes and maps), data fields, contextual menus, etc.
A scroll system has been developed in order to facilitate the shifting through these
lists, which allows for the movement around the different options by dragging the pen
or finger upwards or downwards.
If you execute a brief shift, the last displayed element will become the first on the list.
If you execute a long shift, the list will keep scrolling down and it will stop at the end or
by pressing on the screen.
If you want to move along the lists in a more accurate way, you may use the side
arrows to achieve a more controlled movement.
2.5 Data lists
By pressing on the DATA key on the main menu, you will be able to manage the avail-
able files on your device. This operation is carried out through the waypoints, routes,
tracks and maps lists.
The files to be taken into consideration on this lists will be the ones saved in the
folders ‘TwoNavData/Maps’ (for maps) and ‘TwoNavData/Data’ (tracks, routes and
waypoints).
The general functions of these lists are as follows:
6
• Available elements open: The available elements on the data folder can
be seen on this list. The open elements will be arranged on the top of the
list with a ticked square.
o Press on the name of any element to open it.
o Press on the left square to close it.
• Sub-elements: By briefly clicking on the name of an element (waypoints,
file or route) the waypoints which it contains will be displayed. Press again
on the name of the element to hide its contents.
• Actions on the elements: You can carry out diverse actions on each ele-
ment. When selecting an element (click briefly on it) the bottom keys of the
list will show the most important functions for this element (see properties,
zoom on the element, add waypoints, etc.).
To enter the list of all the functions keep the pressure on the element for a while
Contextual Menu will open.
2.6 Discover
The main menu option “Discover” will allow you to enter into useful tools to explore the
areas you are going to visit:
• Zoom to…: Choose the element (address, POI, favourite, data or coordi-
nates) that you wish to see on the map and a new window will open.
• Simulate: It will allow you to select two spots (present position, by map,
POI, etc.) In order to simulate a navigation from spot A to spot B.
7
ENGLISH
• Stop Simulation: It stops the ongoing simulation (both from A-B spots, as
from any track being animated).
• 3D Panorama: This option shows an aerial view of the surroundings. In
order to do it, Mode 3D must be activated.
3 Start up and maintenance
3.1 ‘Turn on’ and ‘Hold’
Keep the ON key pressed for 2 seconds to start the system. Carry out the same opera-
tion for turning it off.
When the device is on, you may use the key ‘hold’ to block the device on two levels:
• Keypad block: With one brief press on the ‘HOLD’ key, the keypad and the
screen are blocked, making the use of the device impossible, but leaving
the screen on. Repeat a brief pressure to unblock.
• Complete blocking: By pressing for 2 seconds on the ‘HOLD’ key, the
keypad will become blocked and the screen won’t just be blocked, but also
will be turned off. Consequently, the information will not be visible, but the
battery energy will be saved. Press longer once more to unblock.
3.2 Battery Recharge
The TwoNav Aventura Li-on battery is recharged via the USB port. It is normally fit-
ted with 3 power sources:
• PC: When connecting the device to a computer, besides allowing you to
manage the data present in the memory from the PC, the battery is also
charged. The charging speed will be considerably lower to the other two
charging systems (about 12 hours for a complete charge).
• Charger for car lighter: Included in the TwoNav Aventura kit. If it is
charged with the device turned off, it will take from 4 to 5 hours for a com-
plete charge. If navigation is being carried out, it will take longer.
• AC/DC charger: Not included in the series. It can be purchased sepa-
rately or use any other USB charger. A 1000mA/h charger will take about 4
or 5 hours for a complete charge.
You can operate normally while the TwoNav is connected to the power source, except
if it is connected to a PC, when the device will only operate as a massive storage unit.
8
Note: In order to enhance the autonomy of your Aventura, you may purchase the AA
battery accessory with which you can substitute the Li-ion battery by three AA batter-
ies.
Important: When unplugging the device from the power source, TwoNav will inform
you of the disconnection. If you do not answer the message within 30 minutes, the
system will turn off in order to avoid accidental discharges (you may deactivate this
function from ‘Configuration > System > Autonomy)
3.3 Bumps and water
TwoNav Aventura is a device prepared to resist the strain of an intensive use during
the practice of outdoor activities and, therefore, its performance must not be affected
by exposure to small bumps or to rain or splashing water.
However, in order to make the most of the system’s performance it is advised, as far
as possible, to prevent the device from suffering serious bumps and that its permanent
exposure to dust or water.
The resistance to water is based on the correct attachment of the rubber covers
that give access to the slots and ports of the device. It is therefore important to check
that these covers are well sealed prior to beginning our activities.
Never soak the device in water, not even when all the covers are well sealed.
To improve the resistance to bumps, you may fit your Aventura with a Plexiglas screen
to cover one of the most fragile spots of the device: the touch screen. You may find this
attachment on the TwoNav web page or by asking your local dealer.
3.4 Autonomy
TwoNav Aventura may operate around 8 consecutive hours with the screen ON with
no need of recharging the battery and up to 30 hours with the screen OFF and record-
ing the track.
The screen uses an important part of the energy resources, so turning it off may make
the life of the device longer.
The screen of the device will be turned off by default after 1 minute of inactivity.
You may also turn the screen of manually by a sustained pressure on the ‘HOLD’ key.
From “Main Menu > Configuration > System > Autonomy”, you may deactivate or
modify this time, as well as enter other options that may improve the autonomy of the
device.
9
ENGLISH
Note: To enhance the autonomy of your Aventura, you may purchase the AA battery
attachment to substitute the Li-on battery by three AA batteries.
3.5 Connection to PC (storage unit)
When TwoNav Aventura is connected to the PC by means of the USB wire, the Two-
Nav application is closed and the device becomes a “storage unit”. Two new storage
units will then be shown on your PC:
• Local disk: inner memory of the device
• Extractable disk: SD card that may be inserted into the device.
This way you will be able to transfer data from the PC to the Aventura and vice versa.
Please note that the folders to save data in the TwoNav Aventura in the memory card
are:
• Maps: TwoNavData\Maps
• Data (Waypoints, routes and tracks): TwoNavData\Data
Important: While connected to the PC, TwoNav cannot be operated. If the device is
connected to another external source (car or wall charger) you will be able to do it.
3.6 Using the electronic compass
TwoNav Aventura is fitted with a digital compass so you have accurate information
available on the directions to follow even if you are stopped.
To be able to use the information supplied by the compass you must follow two steps:
1. Adjusting the compass: Go to ‘Main Menu > Configuration > Off-road >
Calibrate Compass’. Once inside the adjusting utility, place the device on a
horizontal position and just turn it slowly for a few seconds.
2. Go to ‘Main Menu > Configuration > Off-road > Bearing’ and select ‘Auto-
matic’. This way, the information coming from the compass will be consid-
ered when you are stopped or driving very slowly (in these cases, the GPS
information is less reliable to determine orientation).
Note: Adjustments must be made outdoors and far from sources of alterations of the
magnetic field, such as cars, buildings or electric lines. For further safety, it is recom-
mended to adjust the compass prior to any outings.
Autres manuels pour TwoNav Aventura
1
Table des matières
Langues :
Autres manuels CompeGPS GPS
CompeGPS
CompeGPS TwoNav Delta Manuel utilisateur
CompeGPS
CompeGPS TwoNav Ultra 2.6 Manuel utilisateur
CompeGPS
CompeGPS TwoNav Manuel utilisateur
CompeGPS
CompeGPS Horizon Manuel utilisateur
CompeGPS
CompeGPS TwoNav Sportiva Manuel utilisateur
CompeGPS
CompeGPS Twonav Ultra Manuel utilisateur
CompeGPS
CompeGPS TwoNav Manuel utilisateur
CompeGPS
CompeGPS TwoNav Aventura Manuel utilisateur
CompeGPS
CompeGPS Trail Manuel utilisateur
