Compaq BL10e - HP ProLiant - 512 MB RAM Document technique

radin

to Microsoft Windows Server 2003 with Service

Pack 1 on ProLiant servers

integration note

Abstract.............................................................................................................................................. 2

Planning the upgrade........................................................................................................................... 2

Preparing for the upgrade .................................................................................................................... 4

Recommended system configuration ................................................................................................... 4

Upgrade checklist ............................................................................................................................ 4

Upgrading from Windows NT 4.0......................................................................................................... 6

Prerequisites .................................................................................................................................... 6

Manual install.................................................................................................................................. 6

Unattended/scripted install ............................................................................................................... 7

Upgrading from Windows 2000........................................................................................................... 8

Prerequisites .................................................................................................................................... 8

Manual install.................................................................................................................................. 9

Unattended/scripted install ............................................................................................................. 10

Appendix A: supported servers ........................................................................................................... 11

Appendix B: known issues and workarounds ........................................................................................12

For more information.......................................................................................................................... 15

Call to action .................................................................................................................................... 15

Abstract

This integration note provides system engineers and network administrators with tested information to

upgrade successfully from Microsoft® Windows NT® 4.0 and Microsoft® Windows® 2000 to

Microsoft® Windows® Server 2003 with Microsoft Service Pack 1 (SP1) applied on HP ProLiant

servers. This document includes information on planning, preparing, and upgrading their existing

operating system to Windows Server 2003 with SP1 applied.

The focus of this document does not include installing new installations of Windows Server 2003 SP1.

For information of this nature, refer to the integration note titled “Implementing Microsoft Windows

Server 2003 with Service Pack 1 on ProLiant servers.” This document and others pertaining to

Windows Server 2003 can be found on the HP Windows Server 2003 website at

http://h71028.www7.hp.com/enterprise/cache/8193-0-0-0-121.aspx.

Planning the upgrade

Microsoft Windows Server 2003 is a Windows operating system that takes the best of Windows

Server 2000 technology and makes it easier for you to deploy, manage, and use. In 2005, Microsoft

delivered Windows Server 2003 Service Pack 1 (SP1) to enhance security, increase reliability, and

simplify administration of Windows Server 2003. Windows Server 2003 SP1 provides refinements

and supplies cumulative system patches to Windows Server 2003. Additional reasons to upgrade to

Windows Server 2003 SP1 can be found at the following location:

www.microsoft.com/windowsserver2003/downloads/servicepacks/sp1/top10reasons.mspx.

To effectively plan for the change, you need to understand the differences between your current

configuration and your Windows Server 2003 SP1 configuration. Moving from Windows NT 4.0,

DNS becomes the primary method of name resolution and your network administration becomes

much more granular and localized. It might seem extremely complex at first, but good planning

eliminates much of the difficulty.

To effectively plan for these changes, find and update your network map to determine how and why

your network looks as it does. What domains do you have and why? Does the structure work

internally? What changes could make network use easier? Will certain changes make your network

administrators more efficient? What are your security needs? What are your bandwidth needs?

How do you use or plan to use the Internet within your organization?

Look at the entire network infrastructure to establish what improvements should be made before the

upgrade begins. Look at your current applications and determine if they will operate in a Windows

Server 2003 SP1 environment or if you need an upgrade or replacement. How are the applications

used? Which groups use them? Will this make a difference in your network structure? Are there

similar applications in use elsewhere in your organization that are more likely to be compatible with

Windows Server 2003 SP1? Take time to investigate Windows Server 2003 SP1, your hardware,

and your applications.

NOTE:

Microsoft developed the Application Compatibility Toolkit to help

users determine which applications in their environments support

Windows Server 2003 SP1. You can obtain the associated white

paper and download the utility from the Microsoft website at

www.microsoft.com/windowsserver2003/compatible/appcompat.

mspx.

Establish functional teams with experts in directory services, administration and management, core

operating system (OS), networking, applications, and hardware compatibility. Have these teams

evaluate Windows Server 2003 SP1. Plan on four to six months to correctly plan your upgrade

strategy. Make clear assignments and verify progress along the way. The planning process for a

project of this scope is a critical piece in its success.

Fix any problems in your Windows NT 4.0 and/or Windows 2000 environment and verify that your

Windows Internet Naming Service (WINS) works properly. WINS will be necessary on your system

until all clients are Active Directory aware. Identify the resource domains to be collapsed into the

Active Directory domain structure, and check for duplicate names across the entire network. Audit

your security environment and determine how global groups can help with the upgrade process.

Understand the Microsoft supported upgrade paths for moving to Windows Server 2003 SP1 from

Windows 2000 or Windows NT 4.0 as seen in Table 1.

Table 1. Supported upgrade paths

Current server operating

system

Upgraded server operating system Applied service

pack

Windows 2000 Server 

Windows Server 2003, Standard

Edition Service Pack 1

Windows 2000 Advanced

Server 

Windows Server 2003, Enterprise

Edition Service Pack 1

Windows 2000 Datacenter

Server 

Windows Server 2003,

Datacenter Edition Service Pack 1

Windows NT 4.0 Server 

Windows Server 2003, Standard

Edition Service Pack 1

Windows NT 4.0 Enterprise

Server 

Windows Server 2003, Enterprise

Edition Service Pack 1

IMPORTANT:

You must move to an equivalent or higher operating system during

the upgrade. Downgrading to a less powerful operating system is

not recommended.

Once you decide where you are, how you got there, and what is available, determine where you

want to be and how to get there. Who will upgrade first? How will you determine when the next

group is ready to upgrade? What security issues are most important? How long can you allow for the

full upgrade? Develop a roadmap with clearly defined action programs to make sure you have a

strategy that can work. Your strategy should include checking the HP Windows Server 2003 website

on a regular basis for new information. HP Services can help you plan your upgrade to Windows

Server 2003 SP1.

Reasons to upgrade or to perform a new installation and other useful planning resources are

available at the following areas of the Microsoft website:

•For existing Windows 2000 environments:

www.microsoft.com/windowsserver2003/evaluation/whyupgrade/win2k/w2ktows03-2.mspx

•For existing Windows NT 4.0 environments:

www.microsoft.com/windowsserver2003/evaluation/whyupgrade/nt4/default.mspx

Preparing for the upgrade

To prepare for a successful upgrade, it is important to ensure that your server meets the system

configuration and supported platform requirements and you have all of the software and tools

necessary to complete the tasks at hand. The following sections provide guidelines to help prepare

you for this endeavor.

Recommended system configuration

Table 2 lists the recommended minimum system configuration established by Microsoft for Windows

Server 2003. Service Pack 1 does not change the minimum system configuration established by

Microsoft. Make sure that your server meets the requirements of the Windows Server 2003 edition

you are upgrading to and that it is one of the servers listed in Appendix A: supported servers of this

document.

The recommendations listed here pertain to the Windows Server 2003 operating system only and do

not include the requirements for software applications that run on your system. Please check your

application requirements to make certain your system can run both the operating system and your

software. Most software vendors have this information posted to their website.

Table 2. Recommended minimum system configuration2

Parameter Web Edition Standard Edition Enterprise Edition

Processor 550 MHz 550 MHz 733 MHz

RAM 256 MB 256 MB 256 MB

Monitor VGA or higher

resolution

VGA or higher

resolution

VGA or higher

resolution

Available disk space11.5 GB 1.5 GB 1.5 GB

Note 1: Available disk space refers to free disk space on the partition to contain the system files. Additional

space is required if you copy the Windows Server 2003 CD contents to the hard disk during installation.

Note 2: For the latest system requirements for each edition of the Windows Server 2003 family, visit

www.microsoft.com/windowsserver2003/evaluation/sysreqs/default.mspx.

Upgrade checklist

Before you begin the upgrade, ensure that you have access to the support software and other tools

detailed in Table 3.

Table 3. Checklist

5Description Comments Location

Options ROMPaq By option http://h18007.www1.hp.com/support/files/

server/us/index.html

SmartStart CD Release 7.30

or later

www.hp.com/servers/smartstart

ProLiant Support Pack for

Microsoft Windows Server

2003

Version 7.30A http://h18023.www1.hp.com/support/files/

server/us/locate/3376.html

System Configuration

Utility

Provided on the

SmartStart for

Servers CD

Release 5.50

http://h18023.www1.hp.com/support/files/

server/us/locate/1950.html

5Description Comments Location

(or earlier) and

on the HP

website

System ROMPaq By server http://h18023.www1.hp.com/support/

files/server/us/romtabl.html

HP Smart Array Multipath

Software Version 2.0

For customers

with multipath

hardware

www.hp.com/products/sharedstorage

HP Windows Server 2003

website

For the latest

information

http://h71028.www7.hp.com/enterprise/

cache/8193-0-0-0-121.aspx

Internet access For system

updates

Minimum requirements met See the “Recommended system configuration”

section.

Platforms supported See Appendix A: supported servers.

Sufficient backup media Enough for a

full backup and

in excellent

condition

Windows 2000 Primer

Utility

Erases non-

compatible

ProLiant utilities

http://h18023.www1.hp.com/support/files/

server/us/download/10776.html

Windows Server 2003

SP1

See the “Planning the upgrade” section for the

upgrade path requirements before trying to

upgrade to Windows Server 2003 SP1.

Windows Server 2003

support on third-party

hardware

For hardware

supported

www.microsoft.com/hcl/default.asp

Upgrading from Windows NT 4.0

The procedures detailed in this section support upgrading from Windows NT 4.0 to Windows Server

2003 SP1 on ProLiant servers. Follow the prerequisites and choose either of the installation paths to

complete the upgrade: (1) manual install or (2) unattended/scripted install.

During a manual upgrade from Window NT 4.0, there are five drivers that produce a warning

(cpqcisse, cpqdaen, cpqfcac, prlntss and cpqfcftr), if installed. With an unattended/scripted install,

these warnings do not stop or hinder the upgrade.

Prerequisites

Follow the steps below to prepare for a successful upgrade.

1. Select a supported system platform from the server platforms listed in Appendix A: supported

servers.

2. Download the Primer Utility from the following website:

http://h18023.www1.hp.com/support/files/server/us/download/10776.html. The Primer Utility

removes previously installed utilities not supported under Windows 2000 or Windows Server

2003.

3. Extract the file on the system that you want to upgrade.

4. Read the Help file if you have any questions regarding this utility.

5. Execute PRIMER.EXE to run this utility. Then, reboot the server.

6. Use the ROM-Based Setup Utility (RBSU) or the System Configuration Utility to set the OS to

Microsoft Windows 2000/Windows Server 2003.

7. Choose either of the following installation paths and proceed to the associated section to complete

the upgrade:

•Manual install

•Unattended/scripted install

Manual install

After completing the tasks identified in the prerequisites section, continue the upgrade, as follows, to

perform a manual install:

1. Insert the Windows Server 2003 with Service Pack 1 CD and start the upgrade within the

Windows NT 4.0 operating system.

CAUTION:

If you boot from the Windows Server 2003 with Service Pack 1

CD, the CD will perform a clean install, not an upgrade.

2. Accept the End User License agreement and enter the license key provided by Microsoft.

3. Click Next and the installation will continue.

4. After Windows Server 2003 with Service Pack 1 has been installed, install the Simple Network

Management Protocol (SNMP), if you want to use the functionality of the ProLiant Management

Agents.

•Select the Control Panel from the Start menu.

•Select Add/Remove Programs.

•Click the Add/Remove Windows Components button.

•Select Management and Monitoring Tools from the list of components.

•Click the Details button.

•Select Simple Network Management Protocol so that a checkmark is displayed in the

checkbox.

•Click the OK button and then the Next button.

•Click the Finish button.

5. Download and install the latest ProLiant Support Pack (PSP) from HP website:

http://h18023.www1.hp.com/support/files/server/us/locate/3376.html.

Unattended/scripted install

After completing the tasks identified in the prerequisites section, for an unattended install, create an

answer file (UNATTEND.TXT) and a distribution point (I386 folder) where you can save all the

necessary files for installation.

Microsoft offers a utility, SETUPMGR.EXE that allows you to create an answer file and helps you set

up a distribution point. For additional information, refer to the following Microsoft document: HOW

TO: Use Setup Manager to Create an Answer File in the Windows Server Family (Q323438).

CAUTION:

Make sure you add the following line in the unattended section of

the UNATTEND.TXT file.

[UNATTENDED]

NtUpgrade=Yes

If you do not add this line, then Setup will continue with a fresh

install, not an upgrade.

CAUTION:

If you are using the OEMPreinstall flag with the UNATTEND.TXT

file, remove the following:

[UNATTENDED]

OEMPREINSTALL=YES

Upgrades may fail if the OEMPREINSTALL=YES option is enabled.

Depending on the requirement for the applications being installed, a system administrator can write a

very detailed script file to perform many tasks. In our scenario, HP engineers created two batch files

that performed a fully automated upgrade by performing the following steps:

1. Allow administrator to log on without entering the password.

2. Launch the upgrade (WINNT32.EXE) from the distribution point/server.

3. Provide the license key provided by Microsoft and other necessary information until the installation

completes.

4. If you want to use the functionality of the ProLiant Management Agents, install the Simple Network

Management Protocol (SNMP) as follows:

•Select the Control Panel from the Start menu.

•Select Add/Remove Programs.

•Click the Add/Remove Windows Components button.

•Select Management and Monitoring Tools from the list of components.

•Click the Details button.

•Select Simple Network Management Protocol so that a checkmark is displayed in the

checkbox.

•Click the OK button and then the Next button.

•Click the Finish button.

5. Download and install the latest ProLiant Support Pack (PSP) from HP website:

http://h18023.www1.hp.com/support/files/server/us/locate/3376.html.

Upgrading from Windows 2000

The procedures detailed in this section support upgrading from Windows 2000 to Windows Server

2003 with Service Pack 1 on ProLiant servers.

When upgrading from Windows 2000 with NIC teaming installed and active, an issue with a .DLL

file that halts the manual install exists. This issue is not seen during an unattended/scripted install.

Prerequisites

Follow the steps below to prepare for a successful upgrade.

1. Select a supported system platform from the server platforms listed in appendix a.

2. Double-click on My Computer, then select Help from the menu bar and click on the About

Windows option. Verify whether the system has the latest Microsoft Service Pack installed. If this is

not the case, download the latest service pack from the Microsoft website

(www.microsoft.com/windows2000/downloads/servicepacks/sp4/default.asp) and install it on

your server. This action ensures that the server has the latest software components Microsoft

supplied prior to the upgrade.

3. Download and install ProLiant Support Pack for Microsoft Windows 2000 Version 7.30A from the

software and drivers website at

http://h18023.www1.hp.com/support/files/server/us/locate/1989.html. This action ensures

that all drivers and utilities provided by HP are suitable for upgrading to Windows Server 2003.

IMPORTANT:

Failure to update drivers provided by HP before beginning the

upgrade process might result in unexpected failures during the

upgrade to Windows Server 2003.

4. If Compaq Network Teaming is installed, unteam currently teamed network interface controllers

prior to the upgrade.

5. If installed, uninstall HP Smart Array Multipath Software Version 1.0 before proceeding with either

upgrade method.

•Select the Control Panel from the Start | Settings menu.

•Select Add/Remove Programs.

•Select Compaq Smart Array Redundancy Filter Driver from the list of components.

•Click the Change/Remove button.

•Click the OK button.

•Click the Cancel button.

•Shut down the server.

•Disconnect the SCSI cable from the redundant Host Bus Adapter (HBA).

6. Choose either of the following installation paths and proceed to the associated section to complete

the upgrade:

•Manual install

•Unattended/scripted install

Manual install

After completing the tasks identified in the prerequisites section, continue the upgrade, as follows, to

perform a manual install:

1. Insert the Windows Server 2003 with Service Pack 1 CD into CD-ROM drive to begin installation.

Follow all instructions for upgrading the server.

2. When prompted, choose to download updated setup files from Microsoft.

You will then get two yellow bangs (which is expected and should not halt the upgrade from going

forward). One message tells you that Internet Information Services (IIS) is going to be disabled

during the upgrade, and the other message is for the Fax service.

The upgrade proceeds through copying the install files, and then reboots the server. The install

continues smoothly through the following phases: preparing installation, installing Windows, and

installing devices.

If you have Compaq Network Teaming installed, see the information below:

•During the Installing Network phase, the installation stops (approximately with 32 minutes left

of the install to complete) and a dialog pops up specifying Insert Disk (see actual message

below).

Please insert the compact Disk labeled 'Compaq Network Teaming Disk' into your CD-ROM

and then click 'OK'.

•When dialog pops up, click Cancel for the installation to proceed. After this point, the

installation proceeds uninterrupted until it is complete.

3. Install ProLiant Support Pack (PSP) for Microsoft Windows Server 2003 Version 7.30A (or later),

which is available at http://h18023.www1.hp.com/support/files/server/us/locate/3376.html.

The PSP contains numerous files. All files must be present in the same directory as the SETUP.EXE

program for the PSP to be installed properly.

NOTE:

During the PSP installation, the HP ProLiant Network Teaming

and Configuration for Windows Server 2003 utility will be

installed. Use this utility to reteam your network interface

controllers if you were previously using network teaming.

4. If HP Smart Array MultiPath Software Version 1.0 was uninstalled prior to the upgrade, install HP

Smart Array MultiPath Software Version 2.0. Then, reconnect the SCSI cable to the redundant

HBA.

Unattended/scripted install

After completing the tasks identified in the prerequisites section, continue the upgrade, as instructed

below to perform an unattended/scripted install:

1. Using SETUPMGR.EXE, create a distribution on a remote server (or any server that does not

contain the OS being upgraded). The SETUPMGR.EXE program can be found in

\support\tools\deploy.cab of the Windows Server 2003 SP1 CD.

2. Choose Completely Unattended Install and proceed through the Setup Wizard until it completes.

•Add the following in the [UNATTENDED] section of the UNATTEND.TXT file:

[UNATTENDED]

NTUpgrade=Yes

CAUTION:

The UNATTEND.TXT file created must be modified to allow

unattended upgrade installs. If you do not put the string

specified above into the file, the install will automatically

default to a clean install.

•If you are using the OEMPreinstall flag with the UNATTEND.TXT file, remove the following:

[UNATTENDED]

OEMPREINSTALL=YES

NOTE:

Upgrades may fail if the OEMPREINSTALL=YES option is

enabled.

3. Start the unattended upgrade. Copy the UNATTEND.TXT file and UNATTEND.BAT file created in

steps 1 and 2 to the server you are planning to upgrade.

Autres manuels pour BL10e - HP ProLiant - 512 MB RAM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Compaq Serveur

Compaq

Compaq AlphaServer GS60E Manuel utilisateur

Compaq

Compaq 112726-001 - ProLiant - 6500 Guide de référence rapide

Compaq

Compaq 108164-003 - ProLiant - 800 Guide de référence rapide

Compaq

Compaq ProSignia 300 Manuel

Compaq

Compaq ProLiant 1000 Guide de référence rapide

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manuel de référence

Compaq

Compaq DL760 - ProLiant - 1 GB RAM Guide d'installation

Compaq

Compaq 221050-001 - ProLiant - 5000R Manuel utilisateur

Compaq

Compaq ProLiant 8500 Instructions d'utilisation et de sécurité

Compaq

Compaq AlphaServer ES40 Manuel utilisateur

Compaq

Compaq BL20p - HP ProLiant - 512 MB RAM Instructions d'utilisation et de sécurité

Compaq

Compaq DS20E - AlphaStation - 1 GB RAM Manuel utilisateur

Compaq

Compaq DL590 - HP ProLiant - 1 GB RAM Manuel utilisateur

Compaq

Compaq ProLiant 8500 Manuel d'installation et d'exploitation

Compaq

Compaq RRDCD Manuel de la liste des pièces

Compaq

Compaq AlphaServer ES45 1B Manuel utilisateur

Compaq

Compaq DL320 - ProLiant - G3 Manuel

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manuel utilisateur

Compaq

Compaq 108164-003 - ProLiant - 800 Manuel utilisateur

Compaq

Compaq ProLiant ML350 (G2) Manuel utilisateur

Compaq

Compaq ML350 - ProLiant - G2 Manuel utilisateur

Compaq

Compaq Proliant 800 Instructions d'utilisation et de sécurité

Compaq

Compaq 6000 - ProLiant - 128 MB RAM Manuel

Compaq

Compaq DS20E - AlphaStation - 1 GB RAM Guide de démarrage rapide

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur