Compak CUBE TAMP Manuel utilisateur
INSTRUCTION
MANUAL
AUTOMATIC ELECTRONIC
COFFEE TAMPER
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
2
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
3
INDEX
AUTOMATIC ELECTRONIC COFFEE TAMPER
CUBE
TAMP
SAFETY 4
DESCRIPTION 6
INSTRUCTIONS 7
IDENTIFICATION 8
TECHNICAL CHARACTERITICS 9
EXTERNAL COMPONENTS 11
INSTALLATION 12
OPERATION 14
TROUBLESHOOTING 18
DECLARATION OF CONFORMITY 19
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
4
1. SAFETY
This device must be used
exclusively for the functions for
which it was designed: tamping
ground coffee
Do not use the device to press
any other types of food such as
nuts, or granulated foods such
as sugar and others.
This device may be used by
children aged 8 years and over,
by people
with reduced physical, sensory or mental
capacities and by people without prior
experience/knowledge, provided they
have received supervision or instructions
on the safe use of the device and
understand the associated risks.
Children should not be allowed
to play with the device
Cleaning and maintenance
of the device should not be
carried out by children without
supervision.
Avoid allowing liquids to come
into contact with internal or
external surfaces while the appliance is
switched on or off, except for those parts
expressly mentioned in the “CLEANING”
section. If, for any reason, this happens,
unplug it immediately from
the mains and dry all surfaces carefully.
READ THE SAFETY AND USE
INSTRUCTIONS CAREFULLY
BEFORE FIRST USING
THE APPLIANCE
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
5
When maintaining the coffee
tamper, special care should
be taken as it could cut the
maintainer. The use of suitable gloves
when handling it is recommended.
If it is necessary to access the
interior, where the electrical
components are located, go to
the nearest technical service centre.
If any component should break,
or if any intervention is needed,
we recommend contacting the
technical service centres, which will carry
out the repair or replacement, guaranteeing
that safety standards are adhered to.
Only an authorised supplier
may replace the mains cable of
any machine.
NOTE: The manufacturer will not be liable for damages caused either by the
improper use of the device or by not following the stated safety measures
1. SAFETY
USERS SHOULD PAY SPECIAL
ATTENTION TO AND SCRUPULOUSLY
OBEY THE FOLLOWING SAFETY
INSTRUCTIONS
Any other use will be
considered improper
and dangerous
Do not insert any part of the
body between the coffee
tamper and the holder.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
6
2. DESCRIPTION
The coffee tamper you have purchased
has been designed using the most
innovative technological systems.
The result is a high quality product that
ensures the best results.
Our products are manufactured entirely
by hand, one at a time, following the most
demanding quality requirements.
In its manufacturing process, quality
materials (aluminium, steel, etc.) are
used, which are suitable for contact with
food.
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
7
3. INSTRUCTIONS
3.1. This manual provides the information
necessary for the correct installation,
handling and maintenance of the
equipment and highlights the
precautions that should be
taken by the operator.
To ensure you get the best out of the
machine, it is essential to carefully follow
the instructions given in this manual.
If there is any kind of problem, contact the
nearest technical service. This manual
should be kept until the machine is
replaced and must always be available to
the operator.
3.2. This manual uses some special terms,
such as:
• Text in bold to highlight the importance
of some terms.
• Numbers in parentheses after a word,
which match the numbering of the
items in the image to the side or in the
image of the external components.
Example: ( ) - Display
Icons:
Information Attention
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
8
The technical characteristics
plate is indelibly marked with the
following information:
NOTE: The manufacturer reserves the right to change components/congurations of any
model, according to the different geographic market demands.
4. IDENTIFICATION
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
9
5. TECHNICAL CHARACTERISTICS
5.1. SCOPE
The coffee tamper that you have purchased
is intended for shops and communities
ground coffee needs to be tamped and it
should only be used for this purpose.
Any other use is considered
improper and dangerous.
NOTE: The manufacturer will not be held responsible for any damages resulting from
improper use of the equipment, or for not following the safety measures as outlined
below.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
10
5. TECHNICAL CHARACTERISTICS
5.2. TECHNICAL DATA
110/220/240 V
50/60 Hz
Voltage/Frequency 65 (W)
Weight
Height
Width
Depth
Tamp diameter
6,3
279,7
165
185
53
58
58,3
Kg mm mm
Autres manuels pour CUBE TAMP
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Compak Cafetière
