CommTech CT100 Manuel utilisateur

CT100 VoIP PBX

Installation Guide

Version: 1.0

Date: 2016.11.22

CT100 Installation Guide

2/15

Content

Welcome......................................................................................................................................................3

Before You Start..........................................................................................................................................4

Package Contents.....................................................................................................................................4

Expansion Board.......................................................................................................................................4

CommTech CT100 Overview.....................................................................................................................5

LED Indicators and Ports...........................................................................................................................6

Installation ..................................................................................................................................................8

Safety Disclaimers and Installation Warnings.............................................................................................8

Telephony Module Installation ...................................................................................................................8

DSP Module Installation..........................................................................................................................11

Desktop Installation.................................................................................................................................12

Rack Installation......................................................................................................................................12

Ground Connection.................................................................................................................................13

Connecting the Equipment.......................................................................................................................14

Getting Started with the Configuration....................................................................................................15

CT100 Installation Guide

3/15

Welcome

Thank you for choosing CommTech CT100 IP PBX. CT100 is a cost-effective business

communication system with a base configuration of 100 users and 30 concurrent calls and can scale

up to 200 users and 60 concurrent calls. The flexible CT100 comes with support for analog ports,

ISDN BRI, E1/T1/PRI, and GSM networks.

This guide describes how to install the CT100 and how to log in the web GUI to configure the system.

Once you complete the installation, refer to the CommTech CT-Series Administrator Guide for

instructions on how to perform configurations on the system.

Related Documents

This Installation Guide only explains the installation of CommTech CT100 IP PBX. For more

functionality and advanced settings, please refer to the relative documents as below:

Document

Description

CommTech CT-Series Administrator Guide

The administrator could refer to this manual for

instructions on how to configure, operate, monitor,

and maintain the CommTech CT100 IPPBX.

CommTech CT-Series Extension User

Guide

Users could refer to the guide for instructions on how

to login the user portal, and how to configure their

accounts, listen to call recordings, check voicemail

messages, etc.

CT100 Installation Guide

4/15

Before You Start

Before you begin to install the CT100 IPPhone System, please check the package contents to verify

that you have received the items below. If there is any problem, please contact your provider.

Package Contents

1* CT100 PBX

1* Ethernet Cable

1* Power Cord

2 Rack Mounting Kits

1* Grounding Stud & Nut

4* Rubber Feet

1* Warranty card

1* Quick Start Guide

Expansion Board

CommTech CT100 supports expanding up to 2 Expansion boards and supports expanding one DSP

module.

Expansion Board –CT08

CT08 board supports up to 4 modules (8 ports).

Optional Module

O2 Module

S2 Module

SO Module

B2 Module

GSM Module

3G Module

CT100 Installation Guide

5/15

Expansion Board –CT30

CT30 board supports 1 E1/T1 port.

CP30 Module

CP30 is a DSP module, used to expand the capacity of PBX. With per CP30 module added, the

extensions increase 100 and concurrent calls increase 30 in additional.

CommTech CT100 Overview

Front Panel (1*CT08 + 1*CT30)

CT100 Installation Guide

6/15

Back Panel

LED Indicators and Ports

LED Indicators

LED

Indication

Status

Description

POWER

Power status

The power is switched on

Off

The power is switched off

System

System status

Blinking

The system is running properly

Static/Off

The system goes wrong

WAN

WAN status

Static Green light

Linked normally, 10/100 Mbps.

Static Orange light

Linked normally, 1000 Mbps.

Blinking Orange light

In communication.

Off

Off-line.

LAN

LAN status

Static Green light

Linked normally, 10/100 Mbps.

Static Orange light

Linked normally, 1000 Mbps.

Blinking Orange light

In communication.

Off

Off-line.

Port Status

FXS

Green light

Static: The port is idle.

Blinking: There is an ongoing call on the

port.

GSM/3G

Red light

Static: the trunk is idle.

Blinking slowly: there is no SIM card

inserted.

Blinking rapidly: the trunk is in use.

BRI

Orange light

Blinking slowly: the BRI line is

disconnected.

Static: the BRI line is connected or in

use.

Antenna Sockets

SD Slot Console Power Switch

Power LAN Power Inlet

System WAN Protective Earth

Reset USB Slot

CT100 Installation Guide

7/15

FXO

Red light

Blinking slowly: no PSTN line is

connected

to the port.

Static: the PSTN line is idle.

Blinking rapidly: the PSTN line is busy.

Port Description

Ports

Description

RJ11 Port

FXO port (red light): for the connection of PSTN lines or FXS ports of traditional

PBX.

FXS port (green light): for the connection of analog phones.

BRI port (orange light): for the connection of ISDN BRI lines.

Note: the sequence number of the ports corresponds to that of the Indicator

lights in the front panel. (I.e. the LED lights in the front indicate the connection

status of the corresponding ports at the front panel.)

E1/T1 Port

Connect the E1/T1 line.

ANT

Rotate the antenna into the Antenna Socket.

USB Slot

Connect a USB drive or mobile hard disk drive.

SD Slot

Insert a SD card.

Ethernet Port

CommTech CT100 provides two 10/100/1000 Mbps adaptive RJ45 Ethernet

ports. There are 3 Ethernet modes for the system. The default mode is “Single”.

Single: LAN port interface will be used for uplink connection. WAN port is

disabled.

Bridge: LAN port interface will be used for uplink connection. WAN port

interface will be used as bridge for PC connection.

Dual: both ports can be used for uplink connection.

Reset Button

Press and hold for 10 seconds to restore the factory defaults.

Power Inlet

Connect the supplied power supply to the port.

Power Switch

Switch on or off the device.

CT100 Installation Guide

8/15

Installation

This chapter shows you how to install CommTech CT100 IP phone system.

Safety Disclaimers and Installation Warnings

To avoid unexpected accident, personal injury or device damage, please read the safety disclaimers

and installation warnings.

Power

Use only the power cord provided with the IP PBX.

Keep the power off during the installation.

Make sure that the supply voltage matches the specifications indicated on the back panel of the

device.

To avoid the electric accident, do not open or remove the cover of IP PBX when it is working as

well as off the power.

Before cleaning the device, cut off the power supply.

Environment

Install the CommTech CT100 IP PBX in a location that is clean, free from vibration, electric shock,

and temperature/humidity extremes. The operating temperature should be kept below 104°F (40°C).

Telephony Module Installation

STEP 1 Loosen the screws on the enclosure and then remove the upper cover.

CT100 Installation Guide

9/15

STEP 2 Push out the empty board from the inside of the device.

STEP 3 Push in the Expansion Board (CT08 or CT30).

STEP 4 Lock the screws to fix the Expansion Board.

CT100 Installation Guide

10/15

STEP 5 Insert the Telephony Modules on the CT08 Board. Skip this step for CT30 Board.

STEP 6 Insert a SIM card on the GSM/3G module following the instructions. Skip this step if no

GSM/3G module installed.

STEP 7 Close the cover and fix the screws.

Table des matières

Autres manuels CommTech PBX

CommTech

CommTech CT20 Manuel utilisateur

Manuels PBX populaires d'autres marques

Allo.com

Allo.com Nano 2 Manuel utilisateur

ZYCOD

ZYCOD ZX50 Manuel utilisateur

Panasonic

Panasonic KX-TDA100BX Manuel utilisateur

LV switch

LV switch IPPBX800 Manuel d'instructions

Edge-Core

Edge-Core VST3305 Manuel utilisateur

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manuel utilisateur

Rauland-Borg

Rauland-Borg Telecenter IV Manuel utilisateur

Grandstream Networks

Grandstream Networks UCM6208 Manuel utilisateur

ATCOM

ATCOM IPPBX IP02 Manuel utilisateur

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Manuel utilisateur

bintec elmeg

bintec elmeg elmeg hybird 600 Manuel utilisateur

Panasonic

Panasonic KX-NS300 Manuel utilisateur

MCK

MCK EXTender PBXgateway Manuel utilisateur

Panasonic

Panasonic KX-NS300CN Manuel du propriétaire

NEC

NEC SL1000 Manuel utilisateur

Epygi

Epygi Quadro Quadro 2xi Manuel utilisateur

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Manuel utilisateur

AGFEO

AGFEO AC 14 analog Manuel utilisateur