Commax CAV-1020IG+ Manuel utilisateur

Printed In Korea / 2016.06.104

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133

Web site : www.commax.com

PM0770N00010

•Thank you for purchasing COMMAX products.

•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

•The company is not responsible for any safety accidents caused by abnormal operation of the product.

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133

Web site : www.commax.com

•Thank you for purchasing COMMAX products.

•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

•The company is not responsible for any safety accidents caused by abnormal operation of the product.

GATE VIEW PLUS MONITOR (CAV-1020IG+)

User Manual

코맥스 제품을 구입해 주셔서 대단히 감사합니다.

사용하시기 전에 본 설명서(특히 안전을 위한 주의사항)를 잘 읽어 보시고, 정확하게 사용하여 주시기 바랍니다.

본 제품이 정상적인 동작상태가 아닌 상황에서 발생한 방범 및 방재사고에 대해서는 당사가 책임지지 않습니다.

게이트뷰 플러스 모니터

CAV

1020IG+

제품 사용 설명서

Contents

1. Greetings

4. Operation.................................................................................................................................... 5

5. BRIGHT / COLOR / CONT setting (Available only in monitoring mode ............................6

6. How to use lobby phone ......................................................................................................... 7

7. Installation method ................................................................................................................... 8

8. Wiring ......................................................................................................................................... 8

rt l

ist ........................................................................................................................................9

10.

󱄿Thank you very much for purchasing of COMMAX products.

󱄿Please read carefully this user manual and follow its rules.

󱄿This intercom can be used in offices, and shopping outlets, and provide

convenience to use communication on long distances.

1. Warnings and caution ··········································································

2. Part name and Function ·······································································

3. Usage instruction ················································································

4. User Setting·······················································································

5. System Setting ···················································································

6. How to use lobby phone ·······································································

7. Installation method ··············································································

Wiring method····················································································9.

Component························································································

10. Instructions for use ············································································

11. Miscellaneous···················································································

12. Specication·····················································································

Table of contents

1.Warnings and caution

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

Power & Installation

Warning

Please don’t use several

products at the same time on

one power socket.

·It may cause a fire due to an

abnormal overheating.

Please don’tbend the power

cable excessively or it may

cause an electric shock.

·fire when using a damaged

power cable.

Please don’thandle the power

cable with a wet hand.

·It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

·It may shorten the product

lifespan or cause a fire.

Please don’t install the

product in the place where

there is much oil, smoke or

humidity.

·It may cause an electric

shock or fire.

Please don’t install the

product with the lightening

and thunder.

·It may cause an electric

shock or fire.

Please don’tuse and connect

this product with other

products with different rated

voltage

·It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

·It may cause a fire due to

the increased internal

temperature.

Cleaning & Use

Please don’tdisassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed.

·It may cause an electric

shock or fire.

Please plug the power cable

firmly into the inner end

·It may cause a fire.

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·It may cause an electric

shock or fire

When connecting the power

cables after cutting the cable,

please install the product with

power off

·It may cause an electric

shock or fire

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock.

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don’t

use any chemical products

such as wax, benzene, alcohol

or cleanser.)

Please don’t drop the product

on the ground and don’tapply

a shock .

·It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·It may reduce the product

performance.

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier.

·It may cause a fire.

Please avoid direct rays of the

sun or heating devices at a

time of installation.

·It may cause a fire.

Please don’t install the

product on an unstable place

or small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center.

·It may cause an electric

shock or fire.

Please don’t insert any

metallic or burnable materials

into the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated

batteries for the products of

using DC power.

·It may cause an electric

shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

2. Part name and Function

①LCD monitor : menu, visitor display

②speaker

③Microphone

④Power indicator LED

⑤Away button: For Away set/clear

⑥Monitoring button: Lobby monitoring

⑦Guard call/ paging elevator button : Guard call/ paging elevator

⑧Door release button : For opening door

⑨MENU button : For Menu start/exit

⑩Talk button : For call start/exit

⑪On/Off Switch

⑫External wiring connection socket: For Lobby, Guard, Alert and Security sensor connection

※ This product is compatible with Lobby, Guard unit for Gateview System

Description

LCD monitor

Speaker

Microphone

Power indicator LED

MENU button

Talk button

On/Off Switch

External wiring connection

socket

Away button

Monitoring button

Guard call/ paging elevator button

Door release button

No No No

Description Description

3. Usage instruction

3-1. Call from the individual entrance

3-2. Call from the Lobby

①

Visitor’s image will be shown on the monitor with emitting chime sound when a visitor presses the call

button

②

Press the talk button by watching visitor and talk with a visitor.

(Screen will beturned off after 60 sec automatically from the beginning of conversation)

③

When you receive the call from Lobby or Guard Station during the conversation with the individual

entrance, the electronic chime sound rings. Then, press the monitoring button from the video phone to

finish the conversation with lobby andhave a conversation with visitor.

④

When you press the door release button in the middle of conversation, the lobby gate will be opened

with switchgear sound and the conversation will be finished.

3-3. Conversation with guard

①

The sound of call will be emitted when it has a call from guard.

②

Press the talk button to begin the conversation

③

While talking over the phone with the guard station, lower call sound of monitoring will be emitted.

Then, press the monitoring button from the video phone to finish the conversation with lobby and have

a conversation with visitor

(2)Calling the guard station

①

Press the “Talk” button and “Guard call” button in sequence.

②

Conversation will begin when a guard station responds

3-4. Monitoring

When you receive initial call , your device automatically searches for the door camera and displays OSD

accordingly

①

When the visitor presses the call button, an electronic chime sound rings and

the visitor’s image appears on the monitor.

②

Conversation with the individual entrance will begin when you presses the call

button. To release the door lock, press the door release button.

(Only in case ofusing the screen turned on, open& shut can be used)

③

When you receive the call from Lobby or Guard Station during the conversation

with the individual entrance, the electronic chime sound rings. Then, press the

talk button to end the call with a guard station and press the call button again to

begin the conversation with a visitor .

④

Screen will be turned off after 60 sec automatically, press the monitoring button

to check again.

⑤

When press the talk button after the end of talking with a visitor, screen is turned

off and all is done.

(1) Call from the guard

By pressing monitor button, display above appears. If you press button of your desired

space (monitoring[ ], guard[ ] ), you can monitor according space.

(Door, Lobby,)

- Monitoring (DOOR/LOBBY)function time is 30secs

- You can talk by pressing call button while monitoring(DOOR/LOBBY)

- You can monitor only certain lobby with pre-set ID

Display with Door camera Display with no Door camera

3-5. 

①If the elevator pager(CCU-310EV) is connected with monitor, you can use this function.

②When you press the guard button while in standby or talking status, The menu is displayed as shown in

the picture. (However, the 'GUARD' menu is not displayed when talking with the lobby or guard )

③For paging elevator, press the ELV(corresponding button) while the menu is displayed.

④When you page the elevator, “Elevator CALL” message will be displayed at the top of screen.

⑤If you don’t page the elevator, press the EXIT(Talk button).

When the security bell rings, after checking whether it is real or not, by pressing ‘away’ button once,

you can turn off away mode and can return to initial state with LED blinking and alert tone stopped.

(When the security bell rings , the release / return is only possible when the sensor is in the normal

state, that is, in case of crime security 1, in the state where the contact of the magnetic sensor is

made, in case of crime security 2, only when the motion detecting sensor does not detect any

movement or intruder.)

3-. Bypass call function [used with away mode]

●

When householde sets away mode, visitor at lobby or door camera is automatically connected to

guard station.

(In this case, volume of the call can be lower as it is bypassing another route.)

3-. ALARM1( fire ) function

(1) When alert1 sensor detects fire, alarm tone rings

(Fire engine sound) at guard station and monitor

(2) After checking alert situation is terminated, press away

button twice.

(One time: release/ two times: return), after return, front

LED blinking and security 2 alert tone stops.)

(2) How to turn off the away set

After return, by pressing ‘away button’ once, the entire front LED stops blinking and away mode is turned off

with ‘beep’ sound. The device delivers the away mode off message to guard station. It must be turned off

within the away mode off time.

(When released from factory, away mode off time is initially set for 0sec. You can change it from 0 to 90 sec

by pressing setting button.)

※ Notice: If you don`t turn the away mode off, the device will consider you as an intruder and

alert tone will ring

(3) How to turn off the security bell

(1) How to set Away set

①

When you press the 'away' button in standby mode, the "beep" sound occurs and the whole front

LEDs blink and Away mode is set

②

In the away mode, after away set time finishes, the household unit detects security sensor and

changes into security mode. The entire front LED stops blinking and remains turned on

③

After setting away mode, you should go out within set time.

( AWAY set time: It is initially set for 60 sec and you can change it from 0 to 90 sec by pressing

setting button.)

④

After away mode is set, if device detects something abnormal ( external incursion ), the entire front

LEDs Immediately flash and the security ring tone will be generated at the household unit and

guard unit

Away and security function enabled by connecting to Security 1(magnetic sensor) and Security 2(PIR

sensor)

3-. Away and security function

4. User Setting

After Menu screen appears, you can change setting with below 4 buttons

Menu start and finish :[ ] (Menu button -‘[ ] ’)

SELECT : [ ] (Guard button-‘[ ] ’)

Move upward /move right : [ ] (Door release button –‘▲’ / ‘▶’)

Move downward /move left : [ ] ( Monitor button–‘▼’ / ‘◀’)

After pressing MENU button in Video call or monitoring mode, you can change settings for

DOOR(LOBBY), VIDEO SET(BRIGHTNESS / CONTRAST/ COLOR), UTILITY (ADDITIONAL

FUNCTION) and INFORMATION (product information)

4-1.Display setting

DOOR(LOBBY) VIDEO SET (BRIGHTNESS / CONTRAST/ COLOR control function).

After moving to menu with MENU button, press SELECT button to move to the menu below.

(you can control LOBBY VIDEO SET while you are talking with lobby.)

(1) BRIGHTNESS : control BRIGHTNESS

(2) CONTRAST : control CONTRAST

(3) COLOR : control COLOR

You can control from 0 to 20 level. Initial level is set for level 10



This product can be interlocked with Digital Door Lock via RF module and please refer to connection

diagram.

3-. Approximate alert function

①

In emergency situation, alert tone is generated and this is delivered to guard station

②

The message notification is delivered until household turns off the security mode

③

After notification, devices changes in to stand-by mode

Stand-by mode: pre-mode for ring tone alert. When you receive calls from exterior, device sends

alert tone rings to external devices. (lobby, etc.)

(1) When sensor 2 detects gas release, security2

(Hospital alert tone)alert tone occurs at monitor and guard

station device

(2) After checking alert situation is terminated, press away

button twice.

(One time: release/ two times: return), after return, front

LED blinking and security 2 alert tone stops

3-. ALARM2(Gas) function

4-2. UTILITY (additional function)

After moving to SPEAKER VOLUME from UTILITY, press SELECT button for SPEAKER VOLUME.

Select your desired setting.

Complete your setting by pressing SELECT button

(2) CHIME-BELL VOLUME : control ringing tone

You can control from 0(MUTE) to 3 level. Initial level is set for level 2.

※ how to set

After moving to CHIME-BELL VOLUME from UTILITY, press SELECT button for CHIME-BELL VOLUME.

Select your desired setting.

Complete your setting by pressing SELECT button.

4-3. INFORMATION (product information.)

After entering to menu by pressing menu button, you can move to INFORMATION and check product

information

(1) MODEL : Shows product name

(2) VERSION : Shows program version

(3) HOME ID : Shows current building No. / Household No

(4) TOUCH : Shows touch program version

(5) VIDEO : Shows current camera output standard. (NTSC / PAL)

(6) SOURCE : This indicates location of current video (Household door unit & Lobby entrance)

Exit from menu

4-4. EXIT

(3)EXIT: Return to EXIT of initial menu

(4) RESET: reset display setting

※ how to set

After moving to RESET from DOOR VIDEO SET, press SELECT button for RESET.

Select YES with move button.

Complete your setting by pressing SELECT button

※ Notice :Display control and reset function adjusts each video(DOOR/LOBBY) collectively

(5) EXIT: Return to EXIT of initial menu

After moving to MENU with MENU button, press SELECT button to move to below screen

(1) SPEAKER VOLUME: control call volume

There are 3 levels of volume control options and default is level 2

※ how to set

After moving to menu with your desired MENU from ‘DOOR VIDEO SET’, press SELECT

button to move to the menu below

(you can control ‘LOBBY VIDEO SET’ while you are talking with lobby.)

※ how to set

Table des matières

Autres manuels Commax Moniteur

Commax

Commax CDV-70Y Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation