Page 5
Visit our website for more details
www.CommandAccess.com
U.S. Customer Support
1-888-622-2377
Canada Customer Support
1-855-823-3002
TECHNICAL INFORMATION
PM300/PM300D
• Wires: Input to PM300 non-polarized Black (+)(-) • Operating Voltage Range: 22-30 VDC
Power Supply Options for PM300 and PM300D in Standard Mode:
The PM300 works best with the Command Access PS210, PS220/220B, PS440B, PS480B, PS1, PS2, & PS5 series
regulated power supplies. The PM300 also works with most Regulated power supplies rated at 24VDC and
1.5A or higher. Although we do not recommend using power supplies that we have not thoroughly tested
with the PM300. Please check our compatibility chart in link below for a list of other manufactures power
supplies.
Models:
Power Supply Options for PM300 and PM300D in High Output Mode:
In High Output mode, the PM300 is designed for & MUST BE powered by the Command Access PS210,
PS220/220B, PS440B, PS1, and PS5-4 power supplies only.
Standard model designed to work with 24 VDC regulated power supplies. 12” retrot wiring
harness for other manufactures, such as, Adams Rite, Corbin/Yale, Precision, and more.
-PM300
PM300D - Same as PM300 above with the added feature of a .5 second delay.
Wire Run Guidelines:
For best results we recommend that your maximum wire run not exceed the following:
18ga.= 700’ 16ga. = 1000’ 14ga. = 1250’ 12ga. = 1500’.
Specications:
PM300 Compatibility Chart
• Fuse: Glass 3.5 - 5A, Resettable 1A trip
• Relay: 5A or greater
• Fuse: Resettable 2A trip
• Relay: 10A or greater
Standard Mode High Output Mode
• Output from PM300: Yellow=Pull Coil; Orange= Hold Coil; Green=Common
Note: High Output is recommended for sluggish devices, vertical rods, & overcoming door misalignment.
Scan me
Switch
