Comfort Zone CZ2011P Manuel utilisateur

PORTABLE INFRARED HEATER

with Remote Control

OWNER’S MANUAL

Model No. CZ2011P

PLEASE SAVE THESE INSTRUCTIONS

WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.

Thank you for choosing a Comfort Zone® Infrared Heater. This owner’s manual will provide you with

valuable information necessary for the proper care and maintenance of your new product. Please take a

few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects

of your new heater.

IMPORTANT INSTRUCTIONS

When using this electric unit, basic safety precautions should always be followed to reduce the risk of

fire, electric shock, and injury to persons, including the following:

1. Read ALL instructions before using this unit.

2. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself.

3. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces.

4. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3

ft from the front of the heater and keep them away from the sides, top, and rear. DO NOT place

towels or other objects on the heater.

5. Extreme caution is necessary when any heater is used by or near children or the disabled, or when the

heater is left operating and unattended.

6. DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been dropped

or damaged in any manner. Return heater to authorized service facility for examination, electrical or

mechanical adjustment, or repair.

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER

locate heater where it may fall into a bathtub or other water container. To protect against electrical

hazards, DO NOT immerse in water or other liquids.

8. DO NOT touch the control panel or plug with a wet hand.

9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar

coverings. Arrange cord away from traffic area and where it will not be tripped over.

10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may

cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use on

soft surfaces, like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint,

explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and

open flames.

13. Always plug heaters directly into a wall outlet / receptacle Never use with an extension cord or

relocatable power tap(outlet/power strip)

14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet.

15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug,

DO NOT unplug by pulling on the cord.

16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use.

17. Use only for intended household use as described in this manual. Any other use not recommended

by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not

recommended or sold by unauthorized dealers may cause hazards.

18. Always use on a dry, level surface. Use on floor only.

19. DO NOT use outdoors.

20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state

speed control device.

21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so

will void your warranty. The inside of the unit contains no user serviceable parts. Qualified

personnel should perform all servicing only.

22. Connect to properly grounded outlets only.

23. Save these instructions.

SPECIFICATIONS

Voltage Rating

120 V (60Hz)

Power Consumption

1000W

Unit Size

11.0 in. (W) x 13.0 in. (D) x 13.7 in. (H)

Unit Weight

11.9 lbs

SAFETY FEATURES

Tip-Over Safety Feature

This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch

will automatically shut the heater off. Once the heater is restored an upright position, the heater will

reset. To continue operation, turn on the heater using the supplied remote control or the control panel on

the heater.

Overheat Safety Feature

This heater is equipped with a overheat safety feature. When the heater’s internal components reach a

certain temperature that could cause overheating or possible fire, the heater will automatically shut off.

WARNING: This heater has a voltage rating of

120 volts. The cord has a plug as shown in A. An

adapter as shown in C is available for connecting

three-blade grounding-type plugs to two-slot

receptacles. The grounding lug extending from the

adapter must be connected to a permanent ground

such as a properly grounded outlet box. The

adapter should not be used if a three-slot grounded

receptacle is available.

DO NOT DEFEAT THE SAFETY PURPOSE OF

THE GROUNDED PLUG.

WARNING: It is normal for the power cord to feel warm to touch; however, a loose fit between the

outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a

different outlet. Contact a qualified electrician to inspect the original outlet for damage.

IN THE BOX

·INFRARED HEATER

·REMOTE CONTROL

·REMOTE CONTROL BATTERY

·INSTRUCTION BOOKLET

PRODUCT DIAGRAM

1、Signal-receiving window: for receiving remote control signal.

2、Digital display: indicate set room temperature and set timer value.

3、Timer indication light: indicates when timer is functioning.

4、Timer button: for setting timer function.

Air Outlet

Front Panel

Control Panel

Foot pad

Control Panel

Air Intake

Cord Clamp

Master

Power Switch

Remote Control

5、Temp down button: for setting temperature lower.

6、Temp up button: for setting temperature higher.

7、ON/OFF switch button: for power ON or OFF.

8、Power indication Light: indicate when the unit connects to power supply.

9、Fahrenheit indicator light.

10、℃/℉Button: Button to alternate between Fahrenheit and Celsius readout.

11、Celsius indicator light.

PREPARATION

Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet and turn on

the power switch in the rear of the unit. Only operate heater in upright position.

When using remote control, please pull out the battery saving insulating film as shown.

℃/℉button: Button for alternating between Fahrenheit and Celsius

ON/OFF button: Used for power-on or power-off

Temp up button: to make set temperature higher

Temp down button: to make set temperature lower

Remote Control

PULL

Remote control

Insulating film

Battery cover

Timer power button: for setting timer-power ON/OFF

OPERATING INSTRUCTIONS

1、Start

Turn on or off the heater by pressing the ON/OFF button on the

control panel or by pressing the Power button on the supplied

remote control.

Once power is off, heating elements will stop working first. Fan

will continue working for up to 3 minutes to dispense residual

heat inside the heater. This is a normal function.

2、Setting control panel lock

For safety, users can lock the control panel so children can’t operate the heater. Locking can be set

in both power-on and power-off modes.

And

Press Temp Up and Temp Down buttons together for 3 seconds.

Locking is confirmed when a buzzer rings. When locked, control

panel and remote control will not function.

And

To unlock, press Temp Up and Temp Down buttons together for 3

seconds. Unlocking is confirmed when a buzzer rings. Lock

indication disappears. Control panel and remote control return to

normal function.

3、Setting room temperature

Or Or

Adjust the thermostat by pressing the arrows on the control panel

or remote control.

Set temperature indication varies from 59℉to 86℉or from 15℃

to 30℃. Once you have chosen the desired temperature, the

heater will remain on until the room temperature increases to the

temperature on the digital display. The heater will cycle on and

off to maintain the desired room temperature.

Press ℃/℉button to change the digital display indicator to

Fahrenheit value or Celsius value.

When Fahrenheit indicating light is on, digital display indicates

Fahrenheit value, when Celsius indicating light is on, digital

display indicates Celsius value.

4、Setting timer-power-off

Note: timer-power-off function can only be set while heater is in power-on mode.

When starting the unit, press the timer button on the control

panel or remote control.

Digital display turns set temperature readout to time value for the

timer. Press the timer button repeatedly, the value will vary from

0 hour to 12 hour duration (in1 hour intervals).

The light is on when timer –power-off is set.

5、Setting timer-power-on

Note: timer-power-on function can only be set while heater is in power-off mode.

Under power-off, press the timer button on the control

panel.

Digital will indicate time value for the timer. Press the

timer button repeatedly, the value will vary from 0 hour to

12 hour duration (in 1 hour intervals).

The light is on when timer –power-on is set.

MAINTENANCE

1. Turn off the power switch in the rear of the unit.

2. Unplug the unit and let it cool completely.

3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a

mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT

let liquid enter the heater.

4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the

heater. This may cause damage or deterioration to the surface of the heater.

5. DO NOT immerse the heater in water.

6. Wait until the unit is completely dry before use.

7. Air filter should be cleaned after use for 3 months or if it appears to be blocking airflow. With

heater unplugged, remove 2 assembly screws as illustrated below. With filter assembly removed,

remove 4 filter screws. Clean all parts of filter assembly. Allow parts to completely dry.

8. Reassemble filter and then attach to heater. WARNING: Do not use heater with without filter

assembly in place.

9. If you won’t use the heater for a long time, take battery out of remote control according to the

below steps and store for future use.

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the

original packaging to repack the unit.

PULL

PUSH

Battery cover

Battery

Remote control

The unit

Filter screws

Air filter

Assembly screws

TROUBLESHOOTING

If the heater will not operate, please check the following before seeking repair of service:

1. Check if the power cord is plugged into an electrical outlet, if not, plug in.

2. Check if electricity to the main fuse is working.

3. Check if the battery in remote control is not dead and if the insulating film is pulled out.

NOTE: The heater may not be operating if the thermostat is set higher than the room

temperature. To begin operation, increase the thermostat temperature for a higher heat setting.

LIMITED WARRANTY

Products manufactured by Comfort Zone® are warranted to the original consumer to be free of defects

in material and workmanship for twelve (12) months from the original date of purchase. The warranty

does not cover products modified outside our factory, damage or failure caused by acts of God, abuse,

misuse, abnormal usage, faulty installation, failure to follow suggested maintenance procedures

enclosed with this product (as defined by Magnuson-Moss Warranty-Federal Trade Commission

Improvement Act) This unit is guaranteed to the original retail purchaser against defects in quality or

workmanship for a period of one year from the date of original purchase. If this unit fails because of a

manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. After

30 days, but within the warranty period, if the unit was purchased within the continental united States,

return it, freight prepaid, to Comfort Zone® for repair or replacement. If the unit was purchased outside

the continental united States, return the unit to the place of purchase. This warranty does not cover

damage due to accidents, operation on other than 120 volts, 60 hertz, AC. current, or any other abuse.

All implied warranties, including the warranties of merchantability and of fitness of purpose, if

applicable, are hereby limited in duration to the period of one year from the date of original retail

purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above

limitations may not apply to you. Incidental or consequential damages arising from a breach of either

express or implied warranties are hereby disclaimed and excluded. Some states do not allow the

exclusion of limitation of incidental or consequential damages, so this limitation or exclusion may not

apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state

to state. No informal dispute settlement mechanisms are available. This limited warranty is given in lieu

of all other warranties.

Manufactured by:

Comfort Zone®

324A Half Acre Rd.

Cranbury, NJ 08512 USA

800-221-6895

www.comfortzoneheaters.net

Autres manuels pour CZ2011P

Table des matières

Autres manuels Comfort Zone Chauffage

Comfort Zone

Comfort Zone CZ650B Series Manuel utilisateur

Comfort Zone

Comfort Zone CZPH25RSLS3 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ2011O Manuel utilisateur

Comfort Zone

Comfort Zone CZ220 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ463EBK Manuel utilisateur

Comfort Zone

Comfort Zone CZ650B Manuel utilisateur

Comfort Zone

Comfort Zone CZ9010 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZQTV007E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ2022O Manuel utilisateur

Comfort Zone

Comfort Zone CZ260ER Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ447E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ40E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ273 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ466BK Manuel utilisateur

Comfort Zone

Comfort Zone CZ275 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ448E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ523 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ465E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ290 Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ8008N Series Manuel utilisateur

Comfort Zone

Comfort Zone CZPP21 Manuel utilisateur

Comfort Zone

Comfort Zone CZ2018 Manuel utilisateur

Comfort Zone

Comfort Zone CZQTV008E Series Manuel utilisateur

Comfort Zone

Comfort Zone CZ410 Series Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur