Comfort audio DE10 Manuel utilisateur

SecureStream

Technology

Comfort Digisystem User Manual

Receiver

DE10

English

2Receiver DE10

User Manual

Table of Contents Page

Introduction of the Comfort Digisystem 3

Presenting the Receiver DE10 3

Functions of the Receiver DE10 4

Getting Started 5

First Time Use 6

Settings 8

Pair 10

More Functions 12

Radio Range and Channels 13

Attached Accessories 14

Other Original Accessories 14

Trouble Shooting 15

Service and Warranty 16

Technical Data 16

Important Safety Instructions 17

Receiver DE10

Introduction of the Comfort Digisystem

Thank you for choosing the Comfort Digisystem. The products are easy

to use, with or without hearing aid.

Before using the product, please read this manual carefully.

The receiver Receiver DE10 receives signals digitally which results in

crystal clear sound.

The Comfort Digisystem is fitted with SecureStream Technology –

a special kind of digital technology allowing eavesdrop-secure radio

transfer in real time.

Presenting the Receiver DE10

The Receiver DE10 is a small, flexible receiver which is attached directly

to the ear, usable with or without all-in-the-ear – hearing aids. The re-

ceiver can be used on both right and left ear.

It suits users with high demands for nicely designed and discreet pro-

ducts. Furthermore, the radio signal is encrypted, making it impossible

to overhear what is being said.

SecureStream

Technology

4Receiver DE10

Functions - Receiver DE10

Volume button +

Volume button -

Function indicator

Pairing button

On / Off

Charging socket

Adjustable earloop

Loudspeaker

Receiver DE10

Getting started

Charging

The Receiver DE10 is chargeable. Charge the DE10 at least

2 hours before you use it for the first time. An empty battery is

fully charged within 2 hours.

During charging, the function indicator shows red. When the function in-

dicator shows green, the unit is fully charged and switches to automatic

float charging. The unit is automatically switched off during charging.

You must not change the battery yourself; please contact your point of

purchase.

INPUT 5V 220mA

Only use the Comfort Audio charger

Please note!

Only use the charger supplied by Comfort Audio AB.

Connecting charger to the

Receiver DE10

6Receiver DE10

First Time Use

Switch on the receiver by pressing the On/Off-button for around

2 seconds until the function indicator’s green light switches off.

The DE10 is attached to the ear with the earloop.

Please note! Do not have the volume too high; too high a volume can

seriously damage your hearing.

DE10’s earloop can be turned around its fastening so that the loudspeak-

er can be brought to the ear canal. The earloop should not be bent.

The illustration shows the ideal

setting of the DE10 at the ear

At delivery, the DE10 is ready to use at the right ear, but

by turning around the earloop it can be used at the left

ear.

1. Bend the earloop carefully

away from the DE10.

2. Loosen the earloop and turn it

around

180˚

Receiver DE10

Adjust the volume to a comfortable level with

the volume buttons (+ and -) at the long side

of the unit.

3. Press the earloop back on until it

is firmly attached and turn it

slightly while you mount it.

Switch off the DE10 by pressing the On/Off-button for around 2

seconds until the indicator’s red light switches off.

The necklace can be used as shown in the following illustration

180˚

WARNING!

The necklace should not be used if there is a risk of getting stuck,

e.g. in a machine or other objects.

8Receiver DE10

Settings

As the DE10 does not have a display/menu, the unit’s functions are con-

trolled by means of the pairing button. The current function is shown by

the function indicator.

In addition to the pairing functions (see section Pairing), three other

functions can be activated.

To do this, press the pairing button and hold it immediately after starting

up the unit for 2 seconds.

A selected function can always be cancelled by switching of the DE10

and starting it up again.

Change channel

When the pairing button is pressed for five seconds, the function indica-

tor shows a constant green light. Now release the pairing button, the

function Change channel is activated.

10 channels can be selected (see chapter

Radio Range and Channels

). To

choose a channel, press the pairing button briefly the number of times

corresponding to the desired channel (1x for channel 1, 2x for channel 2

etc.)

After 2 seconds, the selected channel is shown by the same number of

green flashes of the function indicator.

Change

code

Change

code

Factory

reset

0 sec 5 sec 10 sec 15 sec 20 sec

Receiver DE10

Change code

When the pairing button is pressed for 10 seconds, the function indicator

shows a constant red light. Now release the pairing button, the function

Change code

is activated.

Press the pairing button quickly 2 times to generate a new code; at the

same time the pairing information is transmitted (make sure that the

other Digisystem units which should be paired are activated to receive

pairing information).

The function indicator flashes red 5 times, pairing information (code and

channel) has been sent

Factory Reset

When the pairing button is pressed for 20 seconds, the function indicator

will switch to alternating red and green light. The

Factory Reset

function

is activated.

To perform a factory reset, press the pairing button quickly one time.

The function indicator flashes the number of times corresponding to the

channel; see chapter

Radio Range and Channels.

The channel and the code are now reset to the factory settings.

Activating max volume

Choose your max volume with the volume buttons; then press the pair-

ing button and shortly after the volume [-] button. Keep both buttons

pressed for about 10 seconds until the function indicator flashes green 5

times. Now the volume cannot be raised above the installed max volume.

Deactivating max volume

Press the pairing button and shortly after the volume [+] button. Keep

both buttons pressed for about 10 seconds until the function indicator

flashes red 5 times. Now the volume can be raised as much as you want.

Factory reset deactivates max volume

10 Receiver DE10

Pair

Receiver DE10 must be paired using the pairing button, see section

Pairing (via pairing button)

Pairing

To use a receiver and transmitter together, they must be paired. All

transmitters and receivers are default paired at the factory and will work

together.

NB! To prevent eavesdropping, a new code key must be generated and

transmitted between the units by pairing.

Transmitting/receiving of pairing information along with a new code can

be performed from any Comfort Digisystem unit with a display.

To pair units without a display, see sections

Pairing (via pairing button)

and

Pairing (Connector DT10)

. Pairing information or a new code key can

be received by several activated units.

Pairing (via menu)

1. Choose Communication - Pair

2. Select Receive info on one unit. Ready to receive

pairing info is shown in the display.

3. Select New code on the other unit; select Yes.

4. Generate new code and send info? is shown in the

display. Select Yes (Now both the channel and the

coding information have been sent, and sound

transfer is eavesdrop-secure).

5. To pair another unit into your coded system, select

Send info instead on one of your paired units.

Pairing (via pairing button)

(The only way of pairing units without a display, with the pairing button)

You can activate the Pairing function via the pairing button.

1. One brief press of the button opens the

Pairing

menu.

2. Two brief presses activate the Send info function.

3. One long press activates the Receive info function.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Comfort audio Récepteur

Comfort audio

Comfort audio Comfort Contego T900 Manuel utilisateur

Comfort audio

Comfort audio Comfort Digisystem Access DA20 Manuel utilisateur

Comfort audio

Comfort audio Comfort Contego T800 Manuel utilisateur

Comfort audio

Comfort audio Microphone DM30 Manuel utilisateur

Comfort audio

Comfort audio Programmer DT20 Manuel utilisateur

Comfort audio

Comfort audio Comfort Digisystem DH10 Manuel utilisateur

Comfort audio

Comfort audio Comfort Contego T900 Manuel utilisateur

Comfort audio

Comfort audio Comfort Digisystem DH10 Manuel utilisateur

Comfort audio

Comfort audio Programmer DT20 Manuel de service

Comfort audio

Comfort audio Comfort Digisystem DT10 Manuel utilisateur

Comfort audio

Comfort audio Programmer DT20 Manuel utilisateur

Comfort audio

Comfort audio DT10 Manuel de service

Comfort audio

Comfort audio Contego R900 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur