Comfast E375AC Manuel utilisateur
Quick Installation Guide
Wireless AP
M0304412 V4.0
2
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference.
Strictly comply with applicable laws and regulations at the place of use. The device must
not be used in violation of applicable legislation or for illegal purposes.
The company Alza.cz a.s. bears no responsibility if the device is used in violation of
applicable legislation or for illegal purposes.
Importer: Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, www.alza.cz
3
1. Installation Diagram
Note
Solution 1: Single Device Settings: Get into the web setting page independently.
Solution 2: Multiple Devices Settings: Do centralized management settings and Local
portal by AC core gateway.
Note: POE power and other devices which are non-standard, please refer to the packing
list.
Solution 1
Solution 2
4
2. Installation
2.1 Ceiling-mount Installation
1. Remove the chassis of the ceiling AP, and fix it on ceiling by screw.
2. Connect the LAN port of the device by cable. If there are multiple devices, please
connect the WAN port of the device by cable for centralized management.
3. Fix the chassis on the AP appropriately.
2.2 Wall-mount Installation
1. Remove the chassis of the wall AP and fix it on the wall by screw.
2. Connect the LAN port of the device by cable. If there are multiple devices, please
connect the WAN port of the device by cable for centralized management.
3. Fix the chassis on the AP appropriately.
Ceiling
Ceiling
Wall
Wall
5
3. Single Device Configuration
3.1 Connection Diagram
1. Set the computer to obtain the IP address automatically, and connect the LAN
port of the device to the device management interface.
2. The device is defaulted to be fat AP mode. The steps to enter the set interface
follow:
a. Under default configuration, power on the device and wait 90 seconds
until the device starts.
b. Connect the devices LAN port with the computer by network cable.
c. Input 192.168.10.1 in the web browser to enter the set interface.
d. Open the computer browser and input 192.168.10.1 to get into the device
login page. The device is defaulted as Router Mode. When you login the
first time, you need to set a password. The device language is compatible
with Chinese and English to choose, and you can set up the language by
the top right corner icon of the globe.
Computer
POE Power
Supply
(Not Standard)
6
3. When getting into the setting page, there are four working modes in the Wizard:
AP Mode, Bridge Mode, Router Mode, Repeater Mode.
4. Click the AP mode and set up IP Address and Subnet Mask. The IP address and
Subnet mask should be within the same network segment as upper network and
can’t be in conflict with IP address from upper network router. After setting takes
in place, you can visit the device from the IP address you have set just now by
connecting internet with WAN port of the device or POE adapter LAN port.
Note 1: In AP mode, the IP address from the other devices connected the AP will
be allocated by the upper network router.
Note 2: The AP needs to set an intranet IP address (do not set the same IP
address as the upper router). If you want to manage the device, manually set the
IP address of the same network segment from the intranet IP.
5. AP Mode: You can set up 2.4G/5.8G wireless SSID, password, channel and country
in advance. After setting up, the devices WAN port or POE adapter LAN port
connected internet, other mobile devices can connect the SSID to surf the
internet.
7
6. Bridge Mode: Please ensure the WDS in upper network is enabled. AP device can
set up intranet segment (do not set the same IP address as the upper router),
and then select the wireless SSID signal you need to bridge (Distinguish between
5.8GHz and 2.4GHz) and input wireless password.
Note: The password is the same as your upper network router.
Please set the SSID and password for the device and click “Next” to finish settings.
8
7. Repeater Mode: The AP device can set the internal network segment (the
gateway IP should not be the same as the upper device gateway IP). Next, select
the name of the wireless SSID signal that you need to relay (distinguish between
5.8GHz and 2.4GHz) and input wireless password.
Note: The password is the same as your upper network router.
Please set the SSID and password for the device and click “Next” to finish settings.
9
8. Router Mode: There are three ways to surf the internet: PPPOE, Static and DHCP.
Please, refer to router setting as reference.
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase..
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (eg during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
Table des matières
Autres manuels Comfast Point d'accès sans fil
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
