Available accessories (optional)
BRKPAN - Swivel backplate
BRKPAN-LA - Floor mounting backplate
BRKPAN-WM - Wall mounting backplate
BRKPAN-SA - Desk base
5 –Network
①Make sure that the device and the PC are connected via LAN
②Install the software Comelit Advance IP Tool and run it as shown
below:
③Modify the IP address. The default IP address is 192.168.1.150. Click the
information of the camera listed in the above table to show the network
information on the right hand.
Modify the IP address and gateway of the camera and make sure that its
network address is in the same local network segment of the computer.
After modification, please enter the password of the administrator and click
“Modify” button to modify the settings.
The default Password of the administrator is admin.
