Comelit HDCAM360A Manuel utilisateur

FISH-EYE HD-SDI CAMERA, 5 MEGAPIXEL

ART. HDCAM360A

Please read this manual thoroughly before use, and keep for future reference

Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo)

http://www.c melitgr up.c m e-mail: exp rt.department@c melit.it

SAFETY PRECAUTIONS

Please read before using

1. Please read the service manual in details before using.

2. Don't try to disassemble the chassis or the part easily, in case that touch the power by

mistake, is shocked by electricity the danger or caused inside parts to be damaged,

3. Do not attempt to service this unit yourself unless you are authorized to do so. Opening

cover may exposure you to dangerous voltage or other hazards. Refer all servicing to

qualified personnel only.

4. When being regular, please lock the parts firmly first to prevent the machine damage.

5. Please connect correctly in accordance with the regulation, prevent the machine from using,

or striking improperly.

6. Please don't use any organic solution or the corrosively sanitizer to insert and wipe away

the chassis outside. While inserting and wiping away, please turn off the power, and use the

clean cloth is stained with letting a small amount of branch water, insert and wipe away

appearance.

7. Please don't use the camera under the following abominable environments: temperature is

lower than –10°C or is higher than +50°C.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of insulated dangerous Voltage within the

product’s enclosure that may be sufficient magnitude to

constitute risk of electrical shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in the

literature accompanying the appliance.

Product Feature

1. HD CCTV 5 Mega Pixel.

2. SDI output.

3. HDMI output.

4. CVBSx4 output.

5. 360°and 180°panorama view.

6. Virtual PTZ function.

7. Auto Pan Function.

8. Multiple screen display.

9. Privacy mask.

10. Motion tracking.

11. Built-in microphone.

Specifications

Model 360°panoramic camera

Signal System NTSC or PAL

Pick up device 1/3.2” Color CMOS QSXGA (5Mega Pixel : 2592x1944) image sensor

Synchronizing Internal

Scanning System 2:1 Interlace

S/N Ratio More than 51dB

Electronic Shutter x3; x2; x1; AUTO; 1/100; 1/120; 1/250

White Balance Auto

Diagonal 185°

Horizontal

185°

Angle of

view Vertical 185°

Gamma Correct 0.45 / 1

RS485 PELCO D / 9600

Video Output 4 channels CVBS / HDMI / SDI

Lens Type Board lens 1.19 mm / F2.0

Format 1080p

Power Source 12 VDC jack ± 10% / 1A

Power Consumption 6.6 W (max)

Current 550 mA (max)

Operating

Temperature -10°C ~ 50 °C (14°F ~ 122°F )

Storage Temperature

-20°C ~ 70°C (-4°F ~ 158°F)

Dimensions (H x ø) 78.82 x 145 mm

78.82 x 190 mm

Connections:

1 label 1Camera 1 CVBS (BNC) output

2 label 2Camera 2 CVBS (BNC) output

3 label 3Camera 3 CVBS (BNC) output

4 label 4Camera 4 CVBS (BNC) output

5 RS485 cable Purple +/ White -

6 RCA cable Audio output to speaker or DVR audio input

7 Power cable 12 VDC jack

8 SDI cable SDI connector output (BNC gold color)

9 HDMI connector HDMI output to connect to a HDMI monitor

10 Microphone Pinhole type microphone built in

①

Package contents

Camera

Ceiling cover

Ceiling screws

Wall screws

This 360°camera can be installed into different configuration thanks to its rich

connection. You will have an overview of different scenario in the next pages.

A) Scenario without DVR

1. The camera uses the SDI connector output or the HDMI connector to

a HD-SDI monitor that has RS485 built in connector.

The user points the remote controller to the monitor and controls the

camera

2. The camera uses the SDI connector output or the HDMI connector to

a HD-SDI monitor that doesn’t have RS485 built in connector.

The user link the 2 RS485 wires from the camera to a keyboard

controller

B) Scenario with DVR

1. The DVR only supports SDI signal input

The camera used the SDI connector output to the DVR SDI input

The user link the 2 RS485 wires to the RS485 terminal of the DVR

The DVR uses the HDMI connector output to a HDMI monitor

The user controls the camera with the mouse or the remote controller

of the dvr

2. The DVR doesn’t have SDI signal input and only accepts analog

signal

The camera uses the 4 BNC connector output to the 4 video input of

the DVR.

The user can’t access to the 180°and 360°view

3. The DVR can accept both SDI and analog signal

The camera uses the SDI connector output to the DVR SDI input

The camera uses the 4 BNC connector output to the 4 video input of

the DVR

The user links the 2 RS485 wires to the RS485 terminal of the DVR or

to the RS485 terminal of the keyboard controller

RS485 connection with keyboard

The 360° camera is set in protocol

PELCO-D

and baud rate 9600.

User can use keyboard, DVR or any RS485 device to control 360°camera.

Ex.: Keyboard

How to setup connection between keyboard and camera

Press MENU button of keyboard for function setup

Using direction key to select system menu and then press ENTER to get in.

Follow below setting and ready to control camera with command.

1. Keyboard ID Setup: press ENT press 1 press ENT ESC

2. Master Setup: press ENT press 1 press ENT ESC

3. CAM Type Setup: press ENT choose protocol 5: PELCO-D press ENT 

ESC

4. Baud Rate Setup: press ENT choose Baud Rate 1: 9600 press ENT 

ESC

5. Press “ESC” to exit menu.

Note: if you are using others keyboard brand, please make sure the protocol

setting is on

PELCO-D

and baud rate 9600 and the control command is same

as usual.

Command:

the default screen mode is 5. It displays in 5 windows (quad + 360°view)

Camera 1 ~ 4 is a virtual split from 360°screen. U ser can control camera 1~4

CAM : 001< MUX : 00 DV : 00

Setup Menu

>. System Menu

CAM Menu

1. Keyboard ID Setup

2. Master Setup

3. CAM Type setup.

4. Baud Rate Setup

RS 485 port 1

RJ 11 pin 3 +, pin --

RS 485 port

RS 485 cable

Purple +positive

White - negative

like PTZ dome to do Up / Down / Left / Right movement.

Controls on screen in mode 5:

1. Press 1 + CAM to call camera 1 and after use joystick to move.

2. Press 2 + CAM to call camera 2 and after use joystick to move.

3. Press 3 + CAM to call camera 3 and after use joystick to move.

4. Press 4 + CAM to call camera 4 and after use joystick to move.

Get in menu:

press 95 + PRESET to call menu. Use joystick to select items.

Up / Down for item chooses, Right to enter in sub items.

RS485 connection with Monitor with RS485 built in

RS 485 port

RS 485 cable

Purple +positive

White -negative

RS485 A+

RS485 B-

RS485 remote controller

Table des matières

Autres manuels Comelit Caméra de sécurité

Comelit

Comelit IPPTZ120IRD Manuel utilisateur

Comelit

Comelit IPCAM720A Manuel d'instructions

Comelit

Comelit IPFCAMA06FA Manuel utilisateur

Comelit

Comelit ADVANCE Series Manuel utilisateur

Comelit

Comelit AHCAM742A Manuel utilisateur

Comelit

Comelit 40863 Manuel utilisateur

Comelit

Comelit IP START Series Manuel utilisateur

Comelit

Comelit HDCAM502A Manuel utilisateur

Comelit

Comelit AHCAM722A Manuel utilisateur

Comelit

Comelit IPPTZA02Z20A Manuel utilisateur

Comelit

Comelit AHPTZ110A Manuel utilisateur

Comelit

Comelit IPPTZA02Z25A Manuel utilisateur

Comelit

Comelit IPDCAMS05F01B Manuel utilisateur

Comelit

Comelit AHCAM722A Manuel utilisateur

Comelit

Comelit IPCAM753ZA Manuel utilisateur

Comelit

Comelit IPBCAMN08ZA Manuel utilisateur

Comelit

Comelit WIKIT040A Manuel utilisateur

Comelit

Comelit 100 SERIES Manuel utilisateur

Comelit

Comelit AHPTZ10IRC Manuel utilisateur

Comelit

Comelit AHPTZ110A Manuel utilisateur

Comelit

Comelit DOME CAMERA Manuel utilisateur

Comelit

Comelit IPSCAMA08F04A Manuel utilisateur

Comelit

Comelit IPBCAMA05Z02A Manuel utilisateur

Comelit

Comelit PTZ IP Manuel de l'opérateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur