4
2. Directions for use of VitoMat I
2.1. Instructions for use
With VitoMat I filling machines ColorMatic pre-filled cans with solvent and propellant will be
additional filled with lacquers of different manufacturers and different paint qualities. These
cans are constructed for a fill quantity of 400ml and 150ml (for the filling of 150ml cans a
special adapter is necessary) and a test gauge pressure of 15bar. 400ml cans are pre-filled
with approx. 300ml (depending on the product) of a solvent-propellant-mixture and therefore
they have a free filling space of 100ml more or less. By means of a press-in construction this
lacquer will be additional filled into the cans.
2.2. Mounting and starting up
The filling machine is pre-installed by the manufacturer except the
filling lever (which is only to stick into the therefore designed
appliance).
The lever is to
stick into the
aperture on the
right side.
2.3. Assembly
Put the filling machine on a safe and solid work place and, as the case may be, adjust with
the variable pedestals. In addition, the bottom part can be screwed to the place of
employment.
3. Filling of cans
3.1. Take the nozzle off from an empty Colormatic can and put a canister with the paint to be
filled into the demountable bowl aside the filling machine. If using a CleanJector take the
therefore designed cylinder and insert the CleanJector.
3.2. Put the can with the colour cylinder on a scale and fill the accordant quantity of the filling
colour into the cylinder, respectively into the CleanJector. (Possibly consult comparative
tables based on declarations of weight.)
3.3. Open the door of the machine and clip the can with the cylinder between the therefore
destined guide hole and pressing-on plate. The cylinder has to snap on the right position so
that a correct filling process is guaranteed.
Standard filling 400ml Filling 150ml Filling with CleanJector
Ensure that the
can is on the
stop position
