COLOR SWITCH PLUS M45189 Manuel utilisateur
9FT REGAL FIRPRODUCT NAME
Date of purchase: _____/ _____/ _____
M45189
810174021790
Product code:
UPC code:
ASSEMBLY INSTRUCTIONS MADE IN CHINA
9FT REGAL FIR
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from SEARS. Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig.B-Tree and Light Assembly *Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V~60Hz, 0.35A
Output: 29V-0.69A
Section 3
Section 4
Section 2
Section 1
Control Box
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLOR SWITCHING
3. Assemble the tree from the bottom to the top. Insert tree bottom pole into tree stand, then screw the 3
(Please note 8-functions control box is wrapped in the lowest layer, if the remote control disappears, you can
control the light string here.)
4. Continue by inserting the two upper tree sections to the lower section until inserting the tree top.
5. Finally shape the tree by arranging the tips on the branches to give the desired effect. Some tree
styles have “side branches” attached to the main branch stem that require additional shaping as shown
Fig.C. After shaping the complete tree the finished look should be natural and full.
Fig.C
MODEL #:W-3175-90KHZ
screws.
Fig.A-Tree Stand Assembly
ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #:W-3175-90KHZ
6. Then plug the adaptor into the wall outlet finally. Your entire tree should now be lit. If some bulbs
do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs.
Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations. For pre-lit trees, first unplug the adaptor from the wall
outlet.
2. Gather the branches upwards and secure them in place. Then disassemble the tree from the top to the
upper sections. Gently lift off the 3 sections and place them into box.
3TUnscrew the tree stand, lift off the bottom section and put into box. hen disassemble the tree stand
and pack into box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree
to excessive heat or humidity may damage your tree.
TROUBLE SHOOTING TIPS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected as shown in Fig.B and the power cord is
plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please check for loose, broken or missing light bulbs and replace as needed.
SPARE PARTS
For pre-lit trees spare bulbs are included. If extra parts are needed, please contact our customer service
center.
HOW TO USE REMOTE CONTROL:
Remote Control Front Remote Control Back
1: Remote Control Operating Range: 16 ft
2: Remote Control Functions:
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLOR SWITCHING
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLORSWIT CHING 3.Remote Control includes 1 piece 23A battery packed
separately with instruction manual.
WARNING
1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
Tree ID#: Customer Name:
Tree UPC#: Address: (No P.O. Boxes)
Store Purchased: City& State:
Specify Problem: Zip Code:
Day Phone:
Date Purchased:
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, please contact us at 1-844 946 8733
Or visit our website at
www.winnerstree.com.
Welcome to email us: CUSTOMERSERVICE@WINNERSARTS.COM
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS RE
Q
UIRED WHEN RE
Q
UESTING REPLACEMENT PARTS.
Do Not Return This Product To The Store.
ON/OFF
COLOR
MODE -23A+
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
Please refer to part numbers when reordering
Autres manuels COLOR SWITCH PLUS sapin artificiel
Manuels sapin artificiel populaires d'autres marques
Trim a Home
Trim a Home TY-S6-250L Manuel utilisateur
Polygroup
Polygroup TG7600NVQC03 Manuel utilisateur
Sears
Sears Donner & Blitzen M44814 Manuel utilisateur
BETHLEHEM LIGHTING
BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur
Home Accents Holiday
Home Accents Holiday TG76P3D93L08 Manuel utilisateur
Polygroup
Polygroup TG76M3S45C02 Manuel utilisateur
Polygroup
Polygroup TG90P3693L00 Manuel utilisateur
Costway
Costway CM23595US Manuel utilisateur
Polygroup
Polygroup TV46M3ADVC05 Manuel utilisateur
Home Accents Holiday
Home Accents Holiday TG76P4C15D03 Manuel utilisateur
Polygroup
Polygroup TV46P7001X00 Manuel utilisateur
Holiday Living
Holiday Living TV40EH339C01 Manuel utilisateur
