Coleman CBT20 Manuel utilisateur

1 2 3 4 5 6

①Play Backward

②Play Forward

③Play/Pause

④Volume –

⑤Volume +

⑥LED Indicator

⑦USB Power Bank Output

⑧Auxiliary Input

⑨microUSB Charging Port for Internal

Battery

7 8 9 10

Powering CBT20 On / Off

Press and hold the power button until you hear

an audible tone. A blue LED will flash every

second to indicate that it is powered on and

searching for a Bluetooth source to pair with.

To power the speaker off, press and hold the

power button until an audible tone is heard. This

will indicate that the speaker is

powered off.

NOTE: The speaker will automatically power

off after several minutes if the Bluetooth

connection is not paired with a device.

Connecting CBT20 via Bluetooth

Once powered on, the speaker will automatically

enter pairing mode after 15 seconds. The LED

All manuals and user guides at all-guides.com

all-guides.com

will flash blue and red to note that it is in pairing

mode.

Go into your phone/tablet’s Bluetooth settings

and enable Bluetooth. Next, enter the Bluetooth

device list and select Coleman_CBT20. After

selected, wait a few seconds for the pairing to

complete. Some Bluetooth devices may require

a passkey to proceed. If prompted, please enter

0000 as the passkey. Once the pairing is

successful, you will hear and audible tone from

the speaker and a blue LED will begin flashing

every few seconds.

NOTE: The CBT20 will automatically connect

to a previously paired device if the paired

device’s Bluetooth radio is enabled and within

reachable distance.

Connecting CBT20 via Auxiliary Input

If you would like to use a device that is not

equipped with Bluetooth technology, simply

connect the included auxiliary 3.5mm cable from

your device to the Aux-In input at the side base

of the CBT20. This will interrupt any connected

Bluetooth streams until you remove the 3.5mm

cable.

Controlling the Sound on Your CBT20

PLAY / PAUSE

Tap the PLAY/PAUSE button

VOLUME UP / DOWN

Tap + or –buttons to increase or decrease the

volume

FORWARD / BACKWARD

Tap the FORWARD or BACKWARD buttons to

skip ahead or go backwards in a track.

Charging your CBT20

Open the watertight sealed door, and simply

plug the included microUSB cord into the

microUSB port at the base of the speaker. Once

All manuals and user guides at all-guides.com

plugged in, the LED will flash blue. It will turn off

once the internal battery is fully charged.

Charging Another Device (Power Bank)

Open the watertight sealed door, and simply

plug in your own USB cable into the full size

USB port. The charging LEDs on the front will

display the battery remaining level of the internal

battery. Once power from the internal battery is

depleted, it will stop charging your external

device and the charging LEDs will turn off.

NOTE: As not to rapidly decrease the battery

level of your CBT20, it is best to use the Power

Bank function when you are not actively playing

any music from your speaker.

Factory Reset

If you are experiencing connectivity issues, you

may need to perform a hard reset on your

CBT20. To do so, power your speaker off then

on. Once powered on, press and hold the

play/pause button for 6 seconds and it will reset

the Bluetooth connection. Once reset

successfully, the LED indicator will flash red and

blue for a new pairing.

Preserving the Waterproof Seal

Ensure that the side compartment door is fully

pushed in. This will prevent any dust and

moisture from entering the USB and AUX ports.

Specifications

Bluetooth Version: 4.0

Built-in Lithium-Ion Battery: 3.7V, 6000mAh

Charging Voltage: 5V

Speaker: 3W x 2 + 9W (RMS)

Frequency: 100Hz-18KHz

Effective Distance: 8M

Waterproof Grade: IPX6

All manuals and user guides at all-guides.com

Elite Brands Inc., 40 Wall Street, 61st Floor

New York, NY 10005 · Tel: 1-800-441-1100

www.colemanoptics.com

Coleman, , are registered trademarks of

The Coleman Company, Inc. used under license

The word mark and logos are registered trademarks

owned by the Bluetooth SIG, and any use of such marks

by Elite Brands Inc. is under license. Other trademarks and

trade names are those of their respective owners.

All manuals and user guides at all-guides.com

Autres manuels Coleman Intervenants

Coleman

Coleman AKTIV SOUNDS CBT15 Manuel utilisateur

Coleman

Coleman AktivSounds CBT10TWS Manuel utilisateur

Coleman

Coleman ActivSounds CBT25 Manuel utilisateur

Coleman

Coleman AKTIV SOUNDS CBT30 Manuel utilisateur

Coleman

Coleman AKTIVSOUNDS CBT13 Manuel utilisateur

Coleman

Coleman Aktiv Sounds CBT60 Manuel utilisateur

Coleman

Coleman CBT20 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur