Cole Parmer Stuart SC6PLUS Manuel utilisateur

cptechsupport@coleparmer.com | Tel: +44 (0)1785 810433 | 05/2017

EQUIPMENT

EQUIPMENTEQUIPMENT

EQUIPMENT

Using the SC6PLUS printer and PC software

•

Introduction

The Stuart S 6PLUS colony counter consists of a touch-

sensitive illuminated receiver plate and keypad with a digital

LED display. Pressure applied to the receiver plate by marking

a colony registers a count indicated by an audible bleep and

advance on the digital display.

To give a more permanent record of the colony counts, the

counting results together with plate averages and statistics

can be printed on the accessory printer or alternatively sent

to a computer via USB and viewed using the S 6PLUS

software.

We describe here how to use the S 6PLUS colony counter with

the accessory printer and P software.

•

Using the printer

If using the accessory printer, connect the printer to the socket on the rear of the unit and

connect the printer to the mains supply. The power indicator should illuminate.

To print individual counts:

•ount the colonies present on the plate in the usual way then press the save key to

confirm. The unit will beep and the display will show three dashes ---.

•Press the print key. The printer will print the count of the plate.

•To clear the counts, press the save key then press and hold the correct/reset key. The

unit will beep and reset to 0.

To print the results of several counts:

•ount the colonies on the first plate then press the save

key twice.

•Repeat for the remaining plates but after the last count

press the save key only once. The individual counts are

saved as in the averaging function and the display ends

with ---.

•Press the print key. The printer will print the counts of all

the plates together with the population and sample

standard deviations, % Vs, maximum and minimum

counts as shown in the example opposite.

•To clear the memory, press and hold the correct/reset

key. The unit beeps twice and resets the count to 0. The memory is cleared of the

saved counts.

Using the SC6PLUS printer and PC software

cptechsupport@coleparmer.com | Tel: +44 (0)1785 810433 | 05/2017

•

Using the PC software

If intending to use the S 6PLUS software, follow the instructions for installing the software

given at the following link:

http://www.stuart-equipment.com/adminimages/S 6PLUS_P software_Setup(1).pdf.

After installing the software, connect the unit to a P using the supplied USB cable. The

S 6PLUS software screen will be displayed on the computer. The icons perform the

following functions:

Save the data as a text (txt) file for import into a

spreadsheet.

lear the current data.

Go to the Stuart website

To print individual counts to the PC:

•ount the colonies on the plates then press the save key to confirm. The unit will beep

and the display will show three dashes ---.

•Press the print key. The software will display the counts for Dish 1.

•To clear the counts on the unit, press and hold the correct/reset key. The unit beeps

twice and resets the count to 0.

•To clear the counts in the S 6PLUS software, click on the red cross icon to clear the

display.

To print the results of several counts to the PC:

•ount the colonies on the first plate then press the

save key twice.

•Repeat for the remaining plates but after the last

count press the save key only once. The individual

counts are saved as in the averaging function and

the display ends with ---.

•Press the print key. The software will display the

counts of all the plates.

•In the S 6PLUS software, click the file save icon and save the data. The data is saved

as a .txt file in the selected location.

Table des matières

Autres manuels Cole Parmer Équipement de laboratoire

Cole Parmer

Cole Parmer HG-400 MiniG Manuel utilisateur

Cole Parmer

Cole Parmer GenoLyte HG-200 Manuel utilisateur

Cole Parmer

Cole Parmer CB-200 Series Manuel utilisateur

Cole Parmer

Cole Parmer HO-200 Series Manuel utilisateur

Cole Parmer

Cole Parmer GenoLyte HG-250 Manuel utilisateur

Cole Parmer

Cole Parmer WBS-300 Series Manuel utilisateur

Cole Parmer

Cole Parmer BM-600 Manuel utilisateur

Cole Parmer

Cole Parmer Stir-Pak 04555-00 Manuel utilisateur

Cole Parmer

Cole Parmer ShatterBox SM-300 Manuel utilisateur

Cole Parmer

Cole Parmer RS-250 Series Manuel utilisateur

Cole Parmer

Cole Parmer SHM-250 Series Manuel utilisateur

Cole Parmer

Cole Parmer ST-100 Series Manuel utilisateur

Cole Parmer

Cole Parmer pH 550 Manuel utilisateur

Cole Parmer

Cole Parmer Electrothermal MH6616 Manuel utilisateur

Cole Parmer

Cole Parmer HP-400 Series Manuel utilisateur

Cole Parmer

Cole Parmer SPEX 8000M Manuel utilisateur

Cole Parmer

Cole Parmer Stuart SF1 Manuel utilisateur

Cole Parmer

Cole Parmer Colony Counter 14312-00 Manuel utilisateur

Cole Parmer

Cole Parmer Stuart W4000 Manuel utilisateur

Cole Parmer

Cole Parmer RHC-400 Instructions de montage

Cole Parmer

Cole Parmer Stuart SM27 Manuel utilisateur

Cole Parmer

Cole Parmer RS-200 Series Manuel utilisateur

Cole Parmer

Cole Parmer RV-400A-20 Manuel utilisateur

Cole Parmer

Cole Parmer Stuart RE400 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur