Codent APOLLO Series Mode d’emploi
High Speed Handpiece and Quick Connector (APOLLO SERIES)
Operation manual &Maintenance Guide
CODENT TECHNICAL INDUSTRY CO., LTD.
QS-B0-010
ENGLISH 繁 體
0197
02
CAUTION
˙Please consider the safety of the patient when using the handpiece.
˙Please remember when the bur is rotating, pressing the chuck push button
that will result in overheating of the handpiece. When pressing the chuck push button, please keep the
handpiece away from the face of the patient.
˙Please use carefully and do not drop the handpiece.
˙Never try to take the handpiece apart or tamper with mechanism.
˙If the handpiece operate irregular, stop using immediately and give back to your dealer for service.
˙When you want to remove the bur, please wait to the handpiece completely stop rotating.
˙Please use burs no longer than 26mm. Do not use no-dental burs.
˙Please look over the overheating, vibration and noise outside the patient’s mouth. If you nd any unusual
situation, please contact with the dealer for service.
Thank you for purchasing Codent High Speed Handpiece.
0197
03
Contents
1. Performance Specifications......................................................................................................................04
2. Connect to the coupling /Disconnect from the coupling............................................................09
3. Insert & Remove the bur ...........................................................................................................................10
4. Information about burs .............................................................................................................................11
5. Lubricate...........................................................................................................................................................12
6. Clean and Sterilize.........................................................................................................................................14
7. Replace the optic illumination bulb .....................................................................................................15
8. Replace the O-rings......................................................................................................................................16
9. Clean the cellular glass optic rod ..........................................................................................................17
10.Replace the Turbine Cartridge...............................................................................................................18
04
1. Performance Specications
Model A6 KL A6 K A6 L A6 A6 M4
Connector type Kavo MULTI ex
Codent Q6M Codent Q4Q
ISO 4hole
NSK PTL NSK QD-J
Head type Standard
Allowable Max.(rpm) 360,000
Water Spray Triple
Fiber Optics ‐‐‐ ‐‐‐ ‐‐‐
Chuck Type Push Type
Bearing Ceramic
Burs Size : ISO 1797-1 Type3 / Ø1.59~1.60mm
Drive Air Pressure 2.5 kg/cm² ～2.8 kg/cm²
05
Model A5 KL A5 K A5 L A5 A5 M4
Connector type Kavo MULTI ex
Codent Q6M Codent Q4Q
ISO 4hole
NSK PTL NSK QD-J
Head type Miniature
Allowable Max.(rpm) 400,000
Water Spray Triple
Fiber Optics ‐‐‐ ‐‐‐ ‐‐‐
Chuck Type Push Type
Bearing Ceramic
Burs Size : ISO 1797-1 Type3 / Ø1.59~1.60mm
Drive Air Pressure 2.5 kg/cm² ～2.8 kg/cm²
06
Model A1 KL A1 K A1 L A1 A1 M4
Connector type Kavo MULTI ex
Codent Q6M Codent Q4Q
ISO 4hole
NSK PTL NSK QD-J
Head type Miniature
Allowable Max.(rpm) 450,000
Water Spray Single
Fiber Optics ‐‐‐ ‐‐‐ ‐‐‐
Chuck Type Push Type
Bearing Ceramic
Burs Size : ISO 1797-1 Type3 / Ø1.59~1.60mm
Drive Air Pressure 2.5 kg/cm² ～2.8 kg/cm²
07
Model A4 A4 M4 A3 A3 M4
Connector type
Codent Q4Q
ISO 4hole
Codent Q4Q
ISO 4hole
NSK QD-J NSK QD-J
Head type Standard Miniature
Allowable Max.(rpm) 360,000 400,000
Water Spray Single
Fiber Optics ‐‐‐
Chuck Type Push Type
Bearing Ceramic
Burs Size : ISO 1797-1 Type3 / Ø1.59~1.60mm
Drive Air Pressure 2.5 kg/cm² ～2.8 kg/cm²
08
Model A45 L A45 A45 M4
Connector type
Codent Q6M Codent Q4Q
ISO 4hole
NSK PTL NSK QD-J
Head type Miniature
Allowable Max.(rpm) 400,000
Water Spray Single / Triple
Fiber Optics ‐‐‐ ‐‐‐
Chuck Type Push Type
Bearing Ceramic
Burs Size : ISO 1797-1 Type3 / Ø1.59~1.60mm
Drive Air Pressure 2.5 kg/cm² ～2.8 kg/cm²
09
2. Connect to the coupling /Disconnect from the coupling
Please check the coupling is securely attached to the handpiece tubing and the drive air pressure is
proper.
Connect (FIG.1)
Connect the handpiece to the coupling and push.
Disconnect (FIG.1)
Pull back the connector ring to release the handpiece from coupling and remove the handpiece
Codent Coupling: pull back connector ring to disconnect the handpiece.
Connector ring
FIG.1
10
3. Insert & Remove the bur
To insert the bur (FIG.2)
Please press the push button and insert the bur into the chuck. Make sure it is secure and then, release
the button.
To remove the bur (FIG.3)
Please make sure the handpiece is completely stopped rotating then press the push button securely and
remove the bur.
CAUTION
You can pull and push the bur without press the push button for testing the bur is secure.
FIG.2 FIG.3
Autres manuels pour APOLLO Series
1
Ce manuel convient aux modèles suivants
22
Table des matières
Autres manuels Codent Équipement dentaire
Manuels Équipement dentaire populaires d'autres marques
Vatech
Vatech EzRay Air VEX-P300 Manuel utilisateur
KaVo
KaVo GENTLEpower LUX Contra-angle 25 LP Manuel utilisateur
DENTSPLY
DENTSPLY SmartLite Focus Manuel utilisateur
LM
LM ProPower CombiLED Manuel utilisateur
Owandy Radiology
Owandy Radiology RX-AC Manuel utilisateur
mectron
mectron Piezosurgery Manuel utilisateur
