CODELOCKS CL255 Guide de l'administrateur

CL255&CL255KEYCodeChangeGuide

The CL255 code chamber consist of 13 buttons from which the code is selected, and a ‘C’

button which is used to re-set the chamber after an incorrect entry, and which must always be

used as the first digit of a code. Buttons may only be used once in a code. For example, 1212

is not possible.

A CL255 code, or combination, can be entered in any order or sequence; e.g. 1234 can be

4321 or 1342 or whatever sequence is most convenient to remember. With 13 buttons, a total

of 8,191 different codes are available, any of which can be entered in any sequence.

Most people will set a code in the range of 4 to 7 digits, and the total number of codes in this

range is 5,434.

The lock is factory set with a randomly selected 6 digit code starting with the C button. The

code is not recorded by the factory. The code can be changed as often as required to any other

6 digit code. Every new code must start with the C button. Using the spare tumblers, one red

and one blue, the code length can be changed to 5 or 7 digits. Shorter codes are possible, but

1 or 2 digit codes are not recommended.

Code Change Instructions

1. Take your CL255 lock off the door by unscrewing the 2 bolts in the backplate.

2. Press the C button to reset the chamber and place the lock case on a flat surface with the

buttons down.

3. Remove the 2 red screws and carefully lift off the code chamber plate. Check that all 14

springs are held in place on the plate.

4. Note that the red tipped code tumblers correspond in position to the existing code. The blue

tipped non-code tumblers fill the other positions. The C tumbler is not coloured.

5. Hold the lock in your hand and depress the C button. Keeping the C button depressed use

tweezers to re-position the tumblers to correspond with your new code. The square notches of

ALL tumblers MUST face outwards, with the coloured tips ON TOP: see diagram below. Do

not force the tumblers in.

N.B. Holding the C button depressed whilst removing or replacing the tumblers is

essential to avoid damaging the internal mechanism. Do not attempt to reposition the C

tumbler.

6. Replace the code chamber plate carefully with the 2 red screws.

7. Check the operation of the new code, and make a written note of it before re-installing the

lock.

8. Insert the spindle, with the spring on the code side. On latchbolt locks, the spindle must

engage the latch as diagram below.

Maintenance

No maintenance of the working parts is necessary. Do not oil. To maintain the finish the lock

should be cleaned regularly with a soft cloth. A silicone spray or similar should be used to

provide a protective film against grit and grime.



Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels CODELOCKS Verrouillage

CODELOCKS

CODELOCKS CL5500 SERIES Manuel utilisateur

CODELOCKS

CODELOCKS CL100 Manuel utilisateur

CODELOCKS

CODELOCKS CL4510 Manuel utilisateur

CODELOCKS

CODELOCKS NANO90 Manuel utilisateur

CODELOCKS

CODELOCKS CL200 Manuel utilisateur

CODELOCKS

CODELOCKS CL5020 Manuel utilisateur

CODELOCKS

CODELOCKS CL250 Guide de l'administrateur

CODELOCKS

CODELOCKS 4000 Series Manuel utilisateur

CODELOCKS

CODELOCKS CL5500 SERIES Manuel utilisateur

CODELOCKS

CODELOCKS CL1200 Manuel utilisateur

CODELOCKS

CODELOCKS CL4500 Manuel utilisateur

CODELOCKS

CODELOCKS CL6010 Manuel utilisateur

CODELOCKS

CODELOCKS KitLock Slam Latch Manuel utilisateur

CODELOCKS

CODELOCKS CL4510 Manuel utilisateur

CODELOCKS

CODELOCKS KL1000 NetCode Manuel utilisateur

CODELOCKS

CODELOCKS CL5000 Manuel utilisateur

CODELOCKS

CODELOCKS CL600 Manuel utilisateur

CODELOCKS

CODELOCKS Pushbutton 500 Series Guide de démarrage rapide

CODELOCKS

CODELOCKS CL210 Manuel utilisateur

CODELOCKS

CODELOCKS KL1050 Manuel utilisateur

CODELOCKS

CODELOCKS Kit-Lock KL1100 Manuel utilisateur

CODELOCKS

CODELOCKS CL2000 Manuel utilisateur

CODELOCKS

CODELOCKS Kit-Lock KL1100 Manuel utilisateur

CODELOCKS

CODELOCKS CL300 Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur