Code 900FD Manuel utilisateur

Using the CR900FD in a Universal Stand

The CR900FD has a stand detecon feature. By

default, when the CR900FD is placed in the stand,

the reader will automacally enter into moon

detecon mode. When in this mode, simply place

a bar code in the scan eld to acvate the reader.

The CR900FD will beep and ash a green LED to

indicate a ‘good read’ has occurred.

When the CR900FD is removed from the stand,

the reader switches to manual mode and the

trigger must be pressed to read a bar code.

Press and hold the CR900FD trigger, the two

blue bars eming from the reader are used for

targeng. Center the blue bars in the middle of

a bar code.

The opmal reading distance from reader to bar

code is approximately 4.0” (10 cm).

For USB Cable: plug the USB end of the Anity® cable into a USB port on the host device.

Aer several seconds, the reader will beep twice and the LED will turn o to indicate the

CR900FD is ready for use.

For RS232 Cable: plug the power supply into the AC outlet, plug the power supply cord into

the barrel jack of the cable, and connect the RS232 connector to the appropriate serial port

on the host device. Aer several seconds, the reader will beep twice and the LED will turn o

to indicate the CR1400 is ready for use.

Using the CR900FD Out of a Universal Stand

Powering on the CR900FD CR900FD Default Sengs

UPC/EAN/JAN

Code 39

Code 93

The CR900FD, out of the box, will read the following 1D bar codes:

The CR900FD can be upgraded to read 2D bar codes with the purchase of a license key. 2D

license keys can be purchased individually or as a package. Available licenses:

Conguraon Codes

Once the reader is at the opmal distance, the CR900FD will read the bar code (when the

trigger is pressed). The CR900FD will beep and ash a green LED to indicate a ‘good read’ has

occurred.

2 3

Code 128

Interleaved 2 of 5

Codabar

GS1 DataBar (RSS)

PDF417

Data Matrix

QR Code

Aztec Code

All 2D bar codes

Visit www.codecorp.com for upgrading/license key informaon.

Upgrade Opons

Note: a CR900FD will read Data Matrix conguraon codes.

The CR900FD can be quickly, and easily congured to meet the needs of dierent use cases.

A common conguraon is reading bar codes found on cell phone screens. To enable, or

disable, cell phone reading mode, scan the appropriate code below.

For more conguraon opons refer to the CR900FD Conguraon Guide located at

www.codecorp.com. For custom conguraon opons, please contact us at

[email protected].

Enable Cell Phone Reading Mode Disable Cell Phone Reading Mode

Quickstart Guide

C007258_02_CR900FD_Quickstart_Guide

Code Reader™ 900FD (CR900FD)

USB Anity® Cable RS232 Anity® Cable

w/ Power Supply

Aaching/Detaching a Cable

To aach a cable, plug the RJ-50 end of the Anity® cable into boom of the reader (Figure

1). Firmly push the connector into the reader unl a snap can be heard, to indicate the cable

is properly aached. To detach a cable, press a paper clip into the hole on the back of the

CR900FD (Figure 2), and gently pull the cable from the reader.

Figure 2Figure 1

Included with your CR900FD

Depending on the kit ordered, the following may have been shipped with your reader:

Universal Stand

Universal Stand Assembly (included when ordered as a Kit/Package)

Cleaning a CR900FD

The following agents are approved to clean a Code bar code reader:

1) Alcohol Wipes

2) CaviWipes® Disinfecng Towelees

3) Clorox® Disinfecng Wipes

4) Clorox® Bleach Soluon (10% Clorox bleach, 90% tap water)

5) Medical DiAirKem

6) Sani-Cloth® HB, Super Sani-Cloth® Germicidal, Sani-Cloth® Plus Germicidal Disposable Wipes

7) Virex® II Disinfectant Cleaner

Warranty

Code’s CR900FD carries a ve year standard warranty. Universal Stands follow the warranty

of the reader, and cables have a 90 day warranty period. For more warranty informaon,

please refer to the www.codecorp.com.

14870 S. Pony Express Rd. #200 Bluffdale, UT 84065

www.codecorp.com (801) 495-2200

Autres manuels pour 900FD

Ce manuel convient aux modèles suivants

Autres manuels Code Lecteur de codes-barres

Code

Code CR900FD Manuel utilisateur

Code

Code Reader 1200 Manuel utilisateur

Code

Code CR7000 Series Manuel utilisateur

Code

Code CR1500 Mode d'emploi

Code

Code CR1000 Manuel utilisateur

Code

Code Code Reader CR3500 Manuel utilisateur

Code

Code Code Reader CR3500 Manuel utilisateur

Code

Code Code Reader 1400 Manuel utilisateur

Code

Code Code Reader 2.0 Manuel utilisateur

Code

Code Reader 1200 Manuel d'installation et d'exploitation

Code

Code CR900FD Manuel utilisateur

Code

Code Code Reader CR8000 Guide de configuration rapide

Code

Code 2600 Guide de configuration rapide

Code

Code CR2 Manuel utilisateur

Code

Code CR4400 Manuel de l'opérateur

Code

Code 2600 Manuel utilisateur

Code

Code CR3600 Manuel utilisateur

Code

Code Code Reader 1000 Manuel utilisateur

Code

Code CR3600 Manuel utilisateur

Code

Code CR1500 Manuel utilisateur

Code

Code CR1000 Manuel utilisateur

Code

Code 900FD Manuel utilisateur

Code

Code Code Reader 1000 Manuel utilisateur

Code

Code 2600 Guide de configuration rapide

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur