7. MOUNT SECURITY CAMERA
Using the screw accessories provided, mount the IP Camera to your desired location. The cables can either be
threaded through your mounting surface, or through the side of the mounting plate
After Sales Support 1300 663 907
www.winplus.com.au
8. SUCCESS
You have now successfully set up your Cocoon Single Outdoor HD Wireless IP Camera. Using the COT Pro app, you
are able to log on remotely using a 3G or 4G connection
Note - If unable to pair, attempt alternative pairing techniques mentioned in the manual, or alternatively contact our After
Sales Support Centre on 1300 663 907.
Note - Test camera is working correctly in it’s nal position before permanently mounting
Getting Started Guide IT315003
11/2015
Single Outdoor HD Wireless IP Camera
6. PAIR WITH COT PRO
a. While connected to your home Wi-Fi network, press the ‘+’ button on the COT Pro app home screen and
then select ‘Manual’
b. Enter the ID number located on the camera
c. Input a device name of your choice
d. Enter the default password, 123. Then press ‘Save’
e. Once paired successfully, your camera will now be shown in the ‘My Camera’ folder. To commence viewing
the camera, simply press the image
f. To change the camera to WiFi mode, select the camera’s ‘Camera Settings’ button from the My Camera
folder. Select ‘Network Settings’, then select your WiFi network SSID name. Enter your WiFi password to
change to WiFi mode. The Ethernet Cable can now be removed
Note: ‘Smart wi’/’Wi-Fi Connect’ is not compatible with this camera
