Installing the Print Server
Follow these steps for a trouble-free start of print server operations with your 1-
Port USB Print Server. Please take particular notice of the warning in step 4:
the network connection should be made before supplying power to the print
server.
1. Confirm proper operation of the printer to be connected to the print
server.
2. When you have confirmed proper operation of the printer, turn off the
power.
3. Confirm that your network is operating normally.
4. Connect the print server to the network (through the RJ-45 connector of
the print server).
WARNING: Configuration problems may result if theprint server is powered up
without first establishing its network connection. Please follow this procedure to
avoid complications at the configuration stage.
5. While the printer is powered off, connect the print server through the
cable to the printer’s USB port.
6. Turn on the printer’spower.
7. Connect the DC end of the AC Power adapter to the DC power input
socket of the print server and the AC end to the wall outlet.This will
supply power to the print server, and the POST routines will proceed
automatically.
Note: This print server is built with a default IP setting. To prevent from
any conflict in your network, it is recommended to use the PS Admin
program to change the IP setting when there is some other device’s IP
address is the same as the print server’s default IP.
