
Shenzhen Cncote Technology Co.,Ltd
www.cncotegps.com, Attn: Jack Foo, Whatsapp/Wechat: +8613480148499, Email: sales01@cncote.com
----------------------------------------------------------------------------------------------------------------------------------------
material).
(3) Under the decorative panel under the rear windshield of the car.
⑷Inside the car door or the center pillar.
⑸In the dashboard of the electric vehicle/motorcycle or the hidden place under the rear seat.
3.3、Definition of the cables
3.3.1 Please use the power cable provided by the original factory. The red cable is the positive
pole of the power supply, and the black is the negative pole of the power supply. When installing
the negative pole of the power supply, please choose separate grounding or grounding. Do not
connect it with other grounding wires.
3.3.2 ACC cable (orange cable) connects to ACC switch. If the ACC automatic anti-theft function is
required, the ACC line must be connected, and the device will determine whether to enter the
fortified state according to the ACC state; if the ACC line is not connected, the vehicle will enter
the fortified state. When the vehicle is running in the fortified state, vibration will trigger the
vibration alarm.
3.3.3 The oil and electricity control cable (yellow cable) should be connected to the thin yellow
cable on the relay (optional).
3.4 Steps for the correct use of the product: install → start → set → register
Install: When installing, make sure the GPS antenna face the sky, and the place above the
installation location must be covered by materials that do not absorb electromagnetic waves
(such as metal, explosion-proof insulation film).
Start: Install the SIM card in the correct direction, connect the wires according to the wiring
diagram, and then switch on.
Set: It must be done, otherwise no other operations can be performed. Use the owner's mobile
phone to send a text message to the GPS device SIM card number to set the owner's number and
specific number.
Register: The registration method depends on the dealer's platform, and the registration method
is also different. Please consult the dealer.
4. GPS tracker operation instructions
4.1 SMS command
The user uses the mobile phone to send SMS command to the SIM card number of GPS device
(note SIM card should be activated the text message function).
The comma in below SMS command format is in English input format, and the letters are upper
and lower case according to the requirements of the instruction.
Common query functions SMS command Reply
Terminal status query CXZT Version, ID,IP, etc…