CN2HK Limited CK-GSM-9003 Manuel utilisateur

CN2HK LIMITED

Wireless AUTODIAL GSM SMS Home Alarm

Security System 900/ 1800/ 1900Mhz(CK-GSM-9003)

User Manual

Please read this manual before operating this product.

After you finish reading this manual, store it in a safe place for future reference.

ENG

Index

Product Description......................................................................................................................... - 1 -

Product Interfaces ........................................................................................................................... - 1 -

Specifications ................................................................................................................................... - 3 -

Before Start ...................................................................................................................................... - 3 -

How can I start the alarm unit ........................................................................................................ - 4 -

How can I reset the operation password......................................................................................... - 4 -

How can I record voice message...................................................................................................... - 5 -

How can I store emergency phone numbers ................................................................................... - 5 -

How can I enable the siren sound when alarm is triggered ........................................................... - 6 -

How can I mute the siren when alarm is triggered......................................................................... - 6 -

How can I enable siren prompt sound by remote controller.......................................................... - 6 -

How can I disable siren prompt sound by remote controller......................................................... - 6 -

How can I set the siren hooting time ............................................................................................... - 7 -

How can I factory reset the alarm unit ........................................................................................... - 7 -

How can I add new remote controller............................................................................................. - 8 -

Operation Command List ............................................................................................................... - 8 -

Working with Remote Controllers.................................................................................................. - 9 -

How can I add more detectors....................................................................................................... - 10 -

How can I synchronize a wireless keypad to the alarm unit ........................................................ - 11 -

How can I remote control the alarm system by phone dial-in ..................................................... - 12 -

How can I remote control the alarm system by SMS messages ................................................... - 12 -

Product Description

This wireless GSM alarm system provides extra security over ordinary wired phone line system

preventing cutting lines. This advanced model has a built-in UPS battery and prove to provide 24 x 7

non-stop alarm service. Its built-in memory can store 6 pre-set emergency phone numbers and SMS

messages. Once the alarm is triggered by any detectors, the siren would loud and the system will

automatically dial to your pre-set phone numbers one by one automatically and/or send SMS messages

to alert you. Not only this but you could listen to your protected house and hear what is going on there..

The system factory kit (default) includes two wireless zones detectors: wireless PIR Motion Sensor and

Magnetic window/door contact. You can add more different kinds of detectors to fulfill your IDEAL

HOME ALARM SYSTEM, including PIR, GAS LEAKAGE DETECTORS, SMOKE DETECTORS

and MAGNETEC WINDOW/DOOR CONTACT, etc. This All-in-one GSM AutoDial SMS Home

Security System is very easy to install and ideal for DIY.

Product Interfaces

1. Network LED

2. ARM LED

3. Power LED

4. Antenna

5. Microphone

6. Alarm LED

- 2 -

Back Panel:

1. Power Slot for connecting to a 6V power supply

2. Siren Slot

3. On/Off switch for internal rechargeable backup battery

Side Panel:

- 3 -

Specifications

•GSM Frequencies: GSM 900/1800/1900 Mhz

•Wireless Frequency: 315Mhz or 433Mhz

•Working Resistance: 1.5M (muse)

•Power Supply: 6V, 2A

•Antenna: 100 meters without signal interference

•Stand-by Current: <90mA

•Alarm Current: <200mA

•Power Consumption: 0.5W

•Built-in Li-ion internal rechargeable backup battery: 1800mA 3.6V

•Remote two-ways intercom

•Built-in internal microphone for remote listening in

•Emergency Phone Calls

•SMS Messages Alert

•Come with a wireless keypad for programming

•Set Alarm ON/OFF by remote controllers

•Remote control alarm unit by phone dial-in

•Remote control alarm unit by sending SMS messages

•Can record a 10 seconds voice message

•Can Store 6 emergency phone numbers with extensions supported (optional)

•Can Store 1 phone number for receiving SMS messages

•13 ZONES FOR WIRELESS SENSORS

•Partial ARM mode

•SMS Messages Alert on EXTERNAL POWER FAILURE OR RECOVERY

Before Start

1. Please prepare a GSM SIM card which fulfills the following requirements:

i. Unlocked with no PIN code embedded.

ii. On GSM frequency 900/1800/1900Mhz

iii. Without any telephone numbers or messages stored.

2. Please note that this is a pure GSM alarm system which cannot be functioned without inserting a

proper GSM SIM card. Also, all emergency phone numbers or SMS messages would be dialed / sent

via the GSM SIM card’s network.

- 4 -

How can I start the alarm unit

1. Connect the antenna to the alarm unit. Just install it to the antenna slot.

2. Insert proper GSM SIM card into the SIM card slot on the side panel.

3. Connect the power supply to the alarm unit. The power supply must fulfill the following

requirements:

i. 6V

ii. Over 1000mA current

4. Please do not just use the internal backup battery to operate the alarm unit at the first time, as it is

not fully charged. Fully charging the internal battery takes around 12 hours which is automatic

whenever the alarm unit is connected to the power supply and outlet. The internal battery can supply

enough power to operate the alarm unit for around 6 hours after fully charged.

5. After connecting the alarm unit to power supply and outlet, the alarm unit will be turned on

immediately.

You will hear a beep sound. The Power LED will light up

The ARM LED flashes which means the alarm unit is searching for GSM network. It lasts for about

one minute. It may take longer time for your first time turning on the alarm unit or changing another

new GSM SIM card.

If GSM network is found successfully:

- You will hear a long beep sound

- ARM LED stop flashing and becomes solid light

- NETWORK LED flashes

If the alarm unit is failed to find GSM network:

- You will hear constantly short beep sound

6. The alarm system is now on ARM status.

7. Connect the siren to the siren slot on the back panel.

How can I reset the operation password

The default password is 1234. You need this password to program the alarm unit no matter by

wireless keypad, phone dial-in or SMS message in.

You could change your desired password by inputting the following commands using the wireless

keypad:

# 7 * <New Four Digits Password> #

For example, if you want to change the password to 9876, the command should be:

# 7 * 9876 #

Note: You will hear a confirmation beep sound on every key press on the wireless keypad. If no

beep sound is heard on one key press, please press again.

- 5 -

How can I record voice message

You could record a voice message (Maximum 10 seconds long) to the alarm unit. After that, this

voice message will be played on emergency phone calls.

Commands using the wireless keypad:

# 9 * 8 0 <4 digits password> #

After you inputting so, the ARM LED will turn on. You could now leaving your words near the

alarm unit (around 20 cm). Press any keys on the wireless keypad to finish recording. (The process

will be completed automatically after 10 seconds and you do not need to press any keys on keypad)

After that, you will hear a short and a long beep sound which means operation success.

How can I store emergency phone numbers

1. You can store totally 6 emergency phone numbers to the alarm unit. Whenever alarm is triggered,

the alarm unit will dial to those emergency phone numbers one by one until someone answered the

call and disable it.

You could save emergency phone numbers to the alarm unit by inputting the following commands

using the wireless keypad:

# 1 * <First emergency phone number> #

# 2 * <Second emergency phone number> #

# 3 * <Third emergency phone number> #

# 4 * <Fourth emergency phone number> #

# 5 * <Fifth emergency phone number> #

# 6 * <Sixth emergency phone number> #

If your emergency phone number has extensions, the command format is:

# ? * <Emergency phone number> * <Extension number> #

For deleting emergency phone number, the command format is:

# ? * #

For example, if you want to delete the first emergency phone number record, input:

# 1 * #

Note: One short and one long beep sound means operation is completed successfully.

Constantly short beep sound means operation is failed.

- 6 -

2. You can store 1 phone number for receiving SMS messages. Whenever alarm is triggered, the alarm

unit will send a SMS alert message to your phone number.

The message content is as follows:

1st zone alarm!

2nd zone alarm!

3th zone alarm!

......

Also, on AC power loss/ failure and recovery, the alarm unit will send a notification SMS message

to you too.

The messages content is as follows:

AC power shut off

AC power recovered

You could save phone number for receiving SMS messages to the alarm unit by inputting the

following commands using the wireless keypad:

# 0 * <phone number> #

To delete the phone number and disable the sending SMS message feature, please use the following

command:

# 0 * #

How can I enable the siren sound when alarm is triggered

Please input the following command by wireless keypad:

# 9 * 1 #

Note: By default, the siren sound is enabled.

How can I mute the siren when alarm is triggered

Please input the following command by wireless keypad:

# 9 * 0 #

How can I enable siren prompt sound by remote controller

After enabling it, whenever you press any keys on the remote controller, the siren will sound once.

Please input the following command by wireless keypad:

# 9 * 3 #

How can I disable siren prompt sound by remote controller

Please input the following command by wireless keypad:

# 9 * 2 #

- 7 -

How can I set the siren hooting time

You could set the siren hooting time from 1 minute to 9 minutes. This is the time period for siren

sounds whenever alarm is triggered. Default is 1 minute.

Please input the following command by wireless keypad:

# 9 * 4 <1-9> #

For example, if you want to set the siren hooting time to 5 minutes, please input:

# 9 * 4 5 #

If you want the siren keep hooting until you disarm the alarm system, the command is:

# 9 * 4 * #

How can I factory reset the alarm unit

Please input the following command by wireless keypad:

# 9 * 6 9 <4 digits password> #

After that, the alarm unit will be restored to its original factory status. All emergency phone numbers

and recorded voice message will be erased.

Note: You may need to re-synchronize your remote controller once after resetting the alarm unit.

Please take reference to "How can I add new remote controller" section.

Table des matières

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur