Clymen Q7 Manuel utilisateur
Q7 User Manual
. .
Please watch our video manualon the website: www.clymen.com
Please send us an email with subject Extra Warranty to
Table of Contents
SAFETY INSTRUCTIONS.............................................3
FUNCTION OVERVIEW...............................................4
REPLACEABLE COMPONENTS.................................5
COMPONENTS............................................................6
OPERATING.................................................................8
MAINTENANCE............................................................13
SPECIFICATION..........................................................15
COMMON FAILURE.....................................................16
HAZARDOUS SUBSTANCE.........................................17
2
Safety Instructions
Before using this product, read the following safety instructions and follow
routine safety precautions.
Caution
Please carefully read this manual.
Please keep this manual well.
Not following the instructions may damage your robot cleaner
Besides our certified service technicians, no one may disassemble, repair or modify the product.
Do not use any charger other than the one included. It may result in damaging the product.
Do not touch any cord, power jack or the adapter with wet hands.
Do not get curtains or body parts drawn into the wheels of the product.
Do not place the product close to flammable objects such as a lighted cigarette or a lighter.
Do not clean this product when is recharging.
Do not force to bend the cord or place any sharp objects on the product.
This product is designed for indoor use, do no use it outdoors.
Do not sit on the product.
Do not use this product in damp places (such as the bathroom).
Before using this product, move away all fragile objects (such as glasses, lamps, etc.) on the
floor and
those (such as wires, paper and curtains) that may entangle side brushes and suction tunnel.
Do not place this product on a high place (such as tables and chairs).
Turn off the power during transportation or storage.
Make sure the adapter is well connected with power, or the battery may be damaged.
Do not operate robot cleaner when children and pets are left alone.
In case of a full dustbin, please remove the dust before use.
This product only operates between 0℃to 40℃.
Do not use this product under high temperature.
Remove the battery before discarding this product.
Do not remove the battery while connected to a power supply.
Recycle the battery in a safe way.
3
Function Overview
Robot overview
Infrared signal receiver
Panel
Bumper
Middle cover
Power Switch
Dustbin Cover
Primary filter
HEPA filter
HEPA bracket
Middle cover
Dustbin
Power jack
Auto-recharging poles
Left side brush
Battery cover
Universal wheel
Right side brush
Suction inlet
Right wheel
Bottom cover
Left wheel
4
Replaceable components of the product are as follows:
Replaceable components
Universal wheel
component
Left side brush
Right side brush
component
Right wheel
component
Surface cover
Left wheel component
Left side brush component
Bottom cover
Suction tunnel flap
component
Right side brush
Battery
Battery cover
Dustbin component
Fan component
5
Components
Display time setting, progress, recharging status, and error codes, etc.
Error display.。
“ ””Cleaning button
Press “ ”button for operations below:：
A. Switch from sleep mode to selection mode; or switch from selection mode to sleep
mode by pressing on for 3 seconds.
B. Press this button to confirm the cleaning plan made.
“ ””Cleaning plan
A. Press to set cleaning plans under selection mode.
B. Under planning mode, press this button to switch between hour and minute.
C. Under planning mode, press on this button for 5 seconds to cancel planning.
“ ””Spot cleaning
Press “ ””button for operations below：
“ ””
Self-recharging button
Press“ ””button for operations below：
A. Under planning mode, press this button to subtract numbers.
B. Under selection mode, press this button to send the robot to the dock for
self-recharging.
A. Under planning mode, press this button to add numbers.
B. Under selection mode, press this button to start spot cleaning in a spiral pattern.
Panel
“ ”display
“ ”Display
“ ””display
Clean
Spot
Plan
Home
Clean
Clean
Plan
Spot
Spot
Home
Home
Turn constantly on for a full dustbin or a choked suction tunnel. 。
6
Components
Manual
Robot and Accessories
Item
Robot
1
2
3
4
5
6
1
1
1
1
1
1
Recharging dock
Remote control(without battery)
Adapter
Cleaning components
Manual
NO. Number
7
7
Operating
1. Auto-cleaning
2. Spot cleaning
3. Wall-following cleaning
4. Planned cleaning
You can order the robot to start cleaning at a specific time.
The robot will clean the room automatically under self-cleaning mode, and switch among different cleaning
modes according to floor status.
Place the robot beside the position needing spot cleaning and start the robot.
After detecting obstacles (such as wall edges), the robot may enter wall-following cleaning mode. The robot
will sweep along the obstacle under wall-following mode, and clean with its side brushes.
Multiple Cleaning Mode
12
3 4
8
Operating
This product works well on tiles, low-pile carpet (lower than 1.5cm), wooden
floor and hard floors.
Caution: Do not use it on the ground with water
Scope of Application
Tiles Wooden Floor Linoleum Low-pile carpet
Power on/Pause/Sleep
Sleep mode means the robot stops and the screen is also dark.
A. The robot will enter sleep mode after leaving it untouched for 20 seconds.
Attention: Turn off the power completely for storage.
Sleep
A. Make sure to turn on the power switch at the bottom.
B. Press the CLEAN button on the remote or the robot to start cleaning.
Power on
Pause means to switch from working to selection mode, and the
following operation can pause the robot：
A. Pause the robot by pressing any button on the screen;
B. Press the CLEAN button on the remoter to pause;
Pause
B. Press on the CLEAN button on the screen for 3 seconds, then it will enter sleep mode.
9
Operating
Remote Control
Automatic cleaning
Cleaning plan
Spot cleaning
Direction
Forward
Backward
Left
Right
Clean/Power button
Wall-following cleaning
Mechanism of this remoter is similar to a TV remoter. First turn on the switch on
its bottom, then control the robot using buttons on it, such as turning on/off the
robot, spot cleaning, wall-following cleaning, cleaning plan, and self-recharging.
Mount two AAA batteries before using
Remote control may fail when the robot stays near the charging dock
Remove its batteries for storing for a long time.
10
Table des matières
