Cloudray CR Series Manuel utilisateur

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

Laser Engraver and Cutter

CR Series

Operating Manual

Version 1.0 (2022.05)

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

PREFACE

Dear Customer:

Thank you for choosing Cloudray Laser System.

This fiber laser marking machine is intended for personal and professional use.

Cloduray is committed to providing the highest level of customer satisfaction and support. To

ensure a favorable customer experience, we urge you to thoroughly read the documentation

provided with your equipment.

Your satisfaction is essential to us, and we welcome your feedback. Tell us about your

experience with Cloudray Laser Systems and our products.

Should you have any questions, please email the Cloudray Support Team.

Again, thank you for choosing Cloudray.

Sincerely,

Cloudray Laser

Cloudray cannot be held responsible for any direct or indirect damages,

which result from using or working with the products electric circuits or

software described herein. The apparatus must be used only by trained

and skilled personnel. Before use the manual should be read and

followed carefully.

Furthermore, Cloudray reserves the right to change or alter any product

described herein without prior notice.

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

III

Document History

Version

Date

Content

V1.0

05/2022

V1.0 official version released

 
Cloudray Laser System 
Cloudray (Jiangsu) Co., Ltd. 
IV 
CONTENTS 
1. General Information...............................................................................................1 
 Information about this manual ................................................................................. 1 
 Explanation of symbols............................................................................................ 1 
 Liability and warranty............................................................................................... 2 
 Scope of delivery (standard configuration)............................................................... 3 
 Manufacturer's Label............................................................................................... 4 
 Complementary Documentation .............................................................................. 4 
 EC–Declaration of Conformity ................................................................................. 5 
2. Safety Information .................................................................................................6 
 Disclaimer ............................................................................................................... 6 
 General Safety Instructions ..................................................................................... 6 
 Laser Safety Instructions......................................................................................... 7 
 Electrical Safety Instructions.................................................................................... 8 
 Machine identification (warning and safety stickers)................................................ 9 
3. Technical Specifications......................................................................................10 
 Electrical requirements of the machine...................................................................10 
 Dimensions and weight ..........................................................................................11 
 Computer requirements..........................................................................................11 
 Materials.................................................................................................................12 
4. Machine overview................................................................................................ 14 
 General overview ...................................................................................................14 
5. Setup and installation.......................................................................................... 16 
 Temperature and humidity......................................................................................16 
 Before Installation...................................................................................................16 
 Connections ...........................................................................................................16 
5.3.1. Mains connection .........................................................................................16 
5.3.2. PC connection..............................................................................................17 
5.3.3. Air compressor connection...........................................................................17 

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

5.3.4. Air exhaust fan connection ...........................................................................17

5.3.5. Chiller connection.........................................................................................17

6. Operation ............................................................................................................19

Before commissioning............................................................................................19

Power ON/OFF.......................................................................................................19

Software installation ...............................................................................................19

6.3.1. RDWorksV8..................................................................................................19

6.3.2. Lightburn......................................................................................................21

6.3.3. PC and machine connection.........................................................................21

Control Panel Operation.........................................................................................22

The First Time Running..........................................................................................22

7. Maintenance........................................................................................................ 24

Maintenance schedule............................................................................................24

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

1. General Information

For reasons of better legibility, gender-neutral form of address (e. g. "he/she") are not used in

the operating manual. It is expressly stated that in all text passages where natural persons or

groups of persons are mentioned, people of both sexes are always meant.

Information about this manual

Before beginning any work on the machine, read this manual completely and carefully.

Keep the manual for further consultation close to the machine.

This manual describes how to operate the machine properly and safely. Be sure to follow the

safety instructions given here, as well as any local accident prevention regulations and

general safety regulations applicable to the field of usage. Before beginning any work on the

machine, ensure that the manual, in particular the chapter entitled "Safety Information" and

the respective safety guidelines, has been read in its entirety and fully understood.

Storage of the manual

This manual is an integral part of the machine and must therefore be kept in the direct vicinity

of the machine and be accessible at all times.

Complementary documentation

Complementary documentation can be found on the supplied U Disc.

Explanation of symbols

Important technical safety notes and instructions in this manual are indicated by symbols. It

is important to observe and follow these notes and instructions on workplace safety. Avoid

accidents, personal injury, and material damage to property by acting with extreme caution.

Caution!

This symbol indicates a potentially hazardous situation. Not observing

these notes may result in personal injury or damage to equipment.

Caution!

Dangerous electrical voltage - indicates a risk of electric shock and

warns of imminent danger to the life and health of individuals or of

significant damage to equipment.

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

Liability and warranty

Warranty periods specified in the manufacturers "warranty terms and conditions" shall be

binding for the buyer. If no warranty periods are specified, the general terms and conditions

of sale, delivery and payment apply.

All information, illustrations, tables, specifications and diagrams contained in this operating

manual have been carefully compiled according to the current state of technology. No liability

is accepted with regard to errors, missing information and any resulting damage or

consequential loss.

Strict compliance with the safety procedures described in this operating manual and extreme

caution when using the equipment are essential for avoiding and reducing the possibility of

personal injury or

damage to the equipment. The manufacturer shall not be liable for any damage and or faults

resulting from nonobservance of instructions in this manual.

Nonobservance of the operation, maintenance and service instructions described within this

manual absolves Cloudray (Jiangsu) Co., Ltd. from any liability in case of a defect.

Tip: Gives the user the information needed to achieve the objective

directly and without problems.

Protective eyewear should be worn by anyone around this machine

during operation.

This product contains electrical components that should not be disposed

of with regular garbage.

Caution!

Laser beam - means that the laser machine may operate in laser class

4 when commissioning the laser head. Warns of damage to eyes or

skin caused by direct or scattered radiation.

Important: Information the user must observe or know to avoid process

disruptions or malfunctions when using the product.

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

Furthermore, Cloudray (Jiangsu) Co., Ltd. shall accept no liability whatsoever for damage

caused by the use of non- original parts and accessories.

Additionally, Cloudray (Jiangsu) Co., Ltd. shall not be held responsible for any personal injury

or property damage, of an indirect or specific nature, consequential loss, loss of commercial

profits, interruption to business, or loss of commercial information resulting from use of the

equipment described in this manual.

It is strictly prohibited to make any alterations, to prepare translations, decompile,

disassemble, reverse engineer or copy the software.

Cloudray (Jiangsu) Co., Ltd. reserves the right to update any of the information, illustrations,

tables, specifications and diagrams contained in this operating manual with regard to

technical developments at any time without notice.

Scope of delivery (standard configuration)

1. Laser machine

2. U-Disc (with laser software, printer driver and operating manual)

3. Industrial Chiller

4. Air Exhaust Fan

5. Air Compressor

6. Power cable

7. USB computer connection cable

8. Ethernet computer connection cable

9. Hex Wrenches

10. Screwdriver

The actual scope of delivery may be different, depending on the special model, additional

order options or newest technical changes.

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

Manufacturer's Label

The Manufacturer's Label is located on the side/backside of the machine (see picture below)

Complementary Documentation

Complementary documentation can be found on the supplied U-disc:

⚫Laser Engraver and Cutter CR Series Operating Manual

⚫RDWorkV8 User Manual V1.3

⚫RDC6432 User Manual

Cloudray Laser System

Cloudray (Jiangsu) Co., Ltd.

EC–Declaration of Conformity

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cloudray Graveur

Cloudray

Cloudray MP Pro Series Manuel utilisateur

Manuels Graveur populaires d'autres marques

COMGROW

COMGROW COMGO Z1 Manuel utilisateur

BAUKER

BAUKER EG013 Manuel utilisateur

GRAVOGRAPH

GRAVOGRAPH LS900 XP Mode d'emploi

iMARC

iMARC VET TAG Engraver Manuel utilisateur

Epilog Laser

Epilog Laser Edge 12 Manuel utilisateur

Dremel

Dremel 3000 Operating/s Manuel utilisateur

iMARC

iMARC Pet Tag Engraver Manuel utilisateur

PT W50036 Manuel utilisateur

Omtech

Omtech USB3020A Manuel utilisateur

Ortur

Ortur Laser Master 2 Manuel utilisateur

Epilog Laser

Epilog Laser FiberMark Manuel utilisateur

Vision

Vision VE-810 Manuel utilisateur

Omtech

Omtech POLAR 350 Manuel utilisateur

Vision

Vision Cylindrical Manuel utilisateur

SCULPFUN

SCULPFUN S6 Manuel utilisateur

Redsail

Redsail M500 Guide de configuration rapide

Dremel

Dremel 290 Instructions de montage

Vision

Vision MaxPro Manuel utilisateur