CLIPS TECH NB-K1 Manuel utilisateur
Bluetooth Stereo Headset
Clips Neckband
NB-K1 / NB-KO
User Manual
Carefully read this user manual before using your new CLIPS Neckband NB-K1
Bluetooth Stereo Headset . Please follow the instructions and important safety advice.
If used properly, the Clips Neckband will provide long and useful service.
Basic information to connect
Clips Message Reader
Package Contents
This package contains the products listed below. Please check the packaging contents
before use.
☐NB –K1 …………………………………………………………………….1pc
☐USB ChargingCable .......................................................................…1pc
☐User Manual ……………………………………………………………….1pc
This feature enables you to receive the call alert plus incoming
phone numbers and messages through a built-in speaker or
earphones. Please download and install the “Clips Message Reader”
app fromAndroid’s Play Store. (Android OS ONLY)
Use the device ID to search for Bluetooth using your Smartphoneor PC.
Device ID: NB-K1
1
The USB ChargingAdapter in the packaging is designed for this
product ONLY. Please DO NOT use it to charge other devices.
It is not interchangeable with other chargers, as it may cause
damage if used with other products.
!Caution
*LED turns blue when device is fully charged.
Description
CHARGE Before Use!
You MUST charge the device before using the charging cable provided.
The LED charging indicator will TURN GREEN when charging is complete.
2
NOTE: Vibration cannot be turned OFF.
Item Operation LED Display
Power ON Push the Power/Call button for approximately
2 seconds to turn on. Red and Blue LED
blinks
Power OFF Push the Power/Call button for more than 3 seconds to
turn off. LED will turn off
Single Pairing Push the Power/Call button for more than 2seconds
from the POWER OFF position. Red and blue LEDs
blinks
Multi Pairing Push the Play/Stop button for more than 5 seconds
from the POWER ON position. Red and
blue LEDs blinks
Pairing Reset Push the Volume Control -button together for more
than 3 seconds from the POWER ON position. Pink LED-
>Red and Blue L
Ds blinks
Volume Control Push the Volume Control button (“+/-”) just once,
quickly.
Make a Call Push the (on and off ) Power/Call button quickly twice
(starts dialing the last dialed number) from power on
Answer a Call Push the Power/Call button one time, quickly,
when receiving a call.
Reject a Call Push the Power/Call button and hold for
more than 1 second, when receiving a call.
Ending a Call Push the Power/Call button one time, quickly,
when on the call.
Playing Music Push the Music Playback / Pause button
quickly, one
time. Blue LED blinks
Pause Music Push the Music Playback / Pause button quickly,
one time.
Next Song Push the
Next / FF”
button quickly 1 time
Previous Song Push the Back / REW button quickly 1 time
Fast Forward Push the Next/FF button slowly and hold
Rewind Push the Back/Rew button slowly and hold
Ending Music Push the Music Playback / Pause button slowly ,for a
pproximately 1second. 3
How to Set Pairing Mode (Initial registering of the device)
Every Bluetooth enabled device must be initiated by the customer. This means a
“pairing”procedure with the host device or smartphone is required. This requires a
PIN number or auto-pairing before the first time use of the product. Please refer to
this Quick Start Guide for pairing with smartphones.
LED OFF
(Power Off) LED ON
(Blue after Red)
LED ON (Red ⟷Green)
blinking at the same time
(Pairing Mode)
2. Searching for the product from device before connecting
Searching for the product from a paired device--The way search mode works may
differ for some devices, depending on manufacture. Please refer to the “Quick Start
Guide” or user manual of such devices.
3. Registering the product from the device before connecting
The product (NB-K1) will show up on the Bluetooth device, smartphoneor PC. Just
select the product and register it. The LED indicator will turn blue blinking slowly
while it completes the pairing.After that, it will connect automatically and your
Neckband will be ready for use.
4
QUICK START Guide
1.Setting with pairing mode for the product (NB-K1)
Push the Power/Call button for more than 2 seconds from “the status of Power-
off”. LED indicator will blink red and green together so as to turn on the pairing
mode. Initially the pairing mode setting was input to your device at the factory.*
✻This device will automatically pair with previously paired devices. For more details,
please check your smartphone user manual or contact your smartphone manufacturer.
Red Blue alternately blinking
(when pairing) Blue indicator blinking slowly
indicates pairing is completed.
5
PAIRING Connection
Red <-> Blue Blue
Power ON/OFF
￭Power ON (Voice Prompt: Say “Power on”)Automatic Power-Off
Push the Power/Call button approximately 2 seconds using the Power-On/Off button,
then the LED indicator will turn from blue to red to turn power ON. If it does have the
paired device near the product, it will try to connect automatically. If the connection is
completed, the LED indicator will alternately turn from red to blue to show it is ready to use.
If the pairing is interrupted, the red and blue LED will alternately keep blinking.
￭Power OFF (Voice Prompt: Say “Power off”)
Push the Power/Call button approximately 3 seconds from the power-on, then LED
indicator will turn to red after blue and turn off the LED indicator to Power OFF.
Make a call using smartphones
NOTE: The operation might be different for your smartphone or device as interactions
may vary depending on the specification of the products.
￭Receiving a Call (Voice Prompt: Say “Connecting”)
When a call comes to in to your smartphone, the product starts vibrating*
and the LED indicator blinks blue. Push Power/Call button once quickly.
￭Receiving other call
Press Power/Call button quickly to answer or press Power/Call button more
than 1 second
Please speak clearly and directly into the microphone. If the sound you talk
seems too low to the opponent.
✻NOTE: Vibration CANNOT be turned OFF. 6
NOTE: If the signal is lost between device and product, due to such things as turning off the
smartphone or disconnection of the pairing after power is turned on, the red LED indicator
will turn on, indicating the problem, and automatically shut off the product after a brief delay.
￭Playing the Music: Push the Music Playback button quickly
after music has been selected on your smartphone..
￭Pause the Music : Push the Music Playback button quickly
while playing music. When the music is on “Pause” it consumes battery therefore music is
not on use please “End the Music Play”
￭Ending the Music: Push the Music Playback button slowly, for about 1 seconds.
￭Select next song: Push the “Next/FF” quickly for next song.
￭Select previous song: Push the Back/Rew quickly for previous song.
￭FF/REW: Push FF/REW button more than 1 second and hold
•NOTE: Operation is the same for both earphone and speaker modes.
￭Ending a Call
Push on and off the Power/Call button for 1 second while communication.
￭Reject a Call (Voice Prompt “Call reject”)
Push the (on and off ) Power/Call button and hold for more than 1 second,
when receiving a call.
￭Last Call Redial (Voice Prompt “Call Last Number”)
Push on and off the Power/Call button long enough for 1 second.
￭Last Call Redial Cancel
Push the Power/Call button quickly while it is dialing last call number
￭Control Volume
Use the Volume Control button (Volume +/-)to adjust your audio level.If you are
unable to make it loud enough to hear properly, increase the volume of your smartphone.
Music Playback
7
Multi-Pairing
1. Pair the NB-K1 with the first smartphone
2. Power off of the NB-K1 when the pairing is completed.
3. Turn the Bluetooth function off on the smartphone.
4. Prepare the second smartphone and push Call/Power button quickly,
there will be “Beep” sound from earphone.(entering the pairing mode
of the NB-K1).
5. Pair the NB-K1 with second smartphone.
6. After being paired with second smartphone, power-on the first
smartphone, then select the NB-K1 from the Bluetooth menu so as
to connect with first smartphone.
7. NB-K1 will connect automatically every time the power is on.
NOTE: When connected with two phones, some phones might not
connect properly. Please contact the manufacturer.
￭Pairing with two smartphones
￭When two phones are connected with the product
Receiving a call from two smartphones
•Receive first phone call by push Power/Call button quickly
•Push Power/Call button slowly for 1 second then it will convert first call to
on hold and will connect to send receiving call
Anti Lost Function
•Product will alert you with vibration within 20 seconds after the
smartphone is being away and disconnected from the product
without turning off the bluetooth mode on the smartphone.
•This function only works when the product is powered on and paired
with smartphone.
•First alarm will vibrate when the phone is away from the product
approximately 10m within maximum 20 seconds.
* Distance will vary by its wireless environment s around.
•Product vibrates frequently within 5 seconds then it will re-paired
after a while the product is being near enough to the smartphone
back again.
￭This product supportsAnti Lost Function of smartphone by using bluetooth
connectivity.
Follow these steps:
1. Remove the USB charging adapter from the packaging.
2. Plug the adapter into the charging port of the product.
3. Plug the USB connector of the USB charging adapter into a USB AC
adapter or the USB port of a PC (personal computer).
4. A Green LED will light up when charging. Do not use while charging.
5. Do not use until the unit has been fully charged.
Charging will take approximately 2 hours to complete. If the LED
indicator does not turn off after 2 hours, please unplug the USB
charging adapter and plug it again. Charging more than 2 hours may
reduce the battery life and it may cause the unit to malfunction. The
product could not be operating while charging.
!
Charging Device Battery
CHARGING
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CLIPS TECH casque
