Clippasafe 71/5 Manuel utilisateur
8
12
7
4
CLICK !
3
11
1
10
24h
15
ACTIVATE
CATCH
25mm
MAX
IMPORTANT
Before fitting, locate a good fixing position clear from furniture
fixtures, fittings and screw or bolt heads. When fitting several
locks, fit them in the same position in each drawer or cupboard.
The adhesive pads supplied with these locks enable easy
positioning. The catch and latch should be screwed into place for
durability and security. Pre-drill screw holes when fitting to solid
wood or MDF furniture.
Adhesives must be left for 24 hours to set properly.
Once fitted, subsequent misalignment of the drawer front or
cupboard door may prevent the lock from working correctly.
Warning - Metallic or magnetic items in the drawer or cupboard
may prevent the lock from working correctly.
x2
13
2
5 6
9
x4
14 16
Drawer Installation
IMPORTANT - READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
Magnetic Lock
Instructions for Installation and Use
Self Adhesive Pad
Pack Contents
2x 2x 2x 1x
12x
2x
3
x2
2
7
8
CLICK !
25mm
MAX
15
ACTIVATE
CATCH
6
11
CLICK !
5
9
14
10
x4
13
4
12
24h
16
Catch lifts when magnet approaches
enabling drawer or cupboard door
to be opened.
CLIPPASAFE MODEL No.71/5
©Clippasafe Ltd 2011 - 71/5/Feb2011
Clippasafe Ltd.,
Lanthwaite Road, Clifton,
Nottingham. NG11 8LD. England.
Fax: 0115 984 5554
E-mail: [email protected]
Website: www.clippasafe.co.uk
Trouble-shooting
In case of any difficulty with the installation or operation of your Magnetic Locks, please contact the careline or service department below.
Cupboard Installation
Operation
Lever down to engage catch.
Lever up to turn latching mechanism
off and allow unhindered access.
IMPORTANT
Keep magnetic key on
a high shelf or child
inaccessible place.
Additional keys are
available from:
www.clippasafe.co.uk
1
Autres manuels Clippasafe Verrouillage
