Clinton Electronics HD Series Manuel utilisateur
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Clinton Electronics Corp. 6701 Clinton Road. Loves Park, IL 61111
HD Series PVMs
Camera On Screen Display
User Manual
Make sure you read this manual before using the
camera. Store this manual safely so that you can use
it in the future. Please use this manual along with
the Installation Manual included with the camera.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation open-
ings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sourc-
es such as radiators, heat registers,
stoves, or other apparatuses (includ-
ing amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the ap-
paratus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tri-
pod, bracket, or table specified by the
manufacturer, or sold with the appa-
ratus. When a cart
is used, use caution
when moving the
cart/apparatus com-
bination to avoid inju-
ry from tip-over.
13. Unplug this appa-
ratus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified ser-
vice personnel. Servicing is required
when the apparatus has been dam-
aged in any way, such as power-sup-
ply cord or plug is damaged, liquid
has been spilled or objects have fall-
en into the apparatus, the apparatus
has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
IMPORTANT SAFETY INSTRUCTIONS
INFORMATION: This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
DISCLAIMER: Clinton Electronics reserves the right to change the contents of this
manual without prior notice.
WARNING: Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
CAUTION: To prevent electric shock and risk of fire hazards:
u Do NOT use power sources other than that specified.
u Do NOT expose the inside of this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
In USA and Canada, Use Class 2 Power Supply Only
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Contact an authorized technician to carry
out the inspection.
If the camera emits smoke or is unusually
hot for a long period, a fire may be caused.
The camera requires periodic
inspection.
Stop using your camera if you find it
malfunctioning.
If the camera is installed on an inappropriate
surface, it may fall and cause injury.
It could cause an electric shock.
Do not install the camera on a surface
that can not support it.
Do not hold plug with wet hands.
It may result in an electric shock or other
hazards.
It may result in a fire or other hazards.
Do not disassemble the camera. Do not use the camera close to a gas
or oil leak.
This is one of the most important parts of
the camera. Be careful not to leave finger-
prints on the lens cover.
Only use the camera under conditions when
temperatures are between -20°F ~ 122°F. Be
especially careful to provide ventilation when
operating under high temperatures.
Do not touch the front lens of the
camera.
Do not install the camera in extreme
temperature conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
It can damage the housing, compromising
weather resistance.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject it
to physical shocks.
If exposed to radioactivity the Image Sensor
will fail.
It can damage the Image Sensor.
Do not expose the camera to radio-
activity.
Never keep the camera pointed
directly at strong light.
BACKLIGHT 09-10
IMAGE 14-15
LENS 07
WHITE BAL 12
ON SCREEN DISPLAY MENU 01-03
TABLE OF CONTENTS
OSD MENU SETTINGS 04
DAY & NIGHT 11
17-18MOTION
DIS (Digital Image Stabilization) 16
EXPOSURE 08
DNR (Digital Noise Reduction) 13
SYSTEM 19-20
EXIT 20
TROUBLESHOOTING 21
ZOOM FOCUS 05-06
Clinton Electronics Corp. HD Series PVMs User Manual
01
OSD
(On Screen Display)MENU
Camera functions and settings can be adjusted or changed by activating the
OSD menu. When the OSD menu is activated, text will display on the monitor. The
user can then move the cursor to the desired function to change the setting.
LENS • MANUAL • DC
EXPOSURE • BRIGHTNESS • SHUTTER • SENS-UP
• AGC
ZOOMFOCUS • AF MODE • SCANNING • ONESHOT
• SYNC TDN • LENS RESET • REFOCUS
BACKLIGHT • OFF
• WDR
• HLC • BLC
DAY AND NIGHT • AUTO • B&W• COLOR
• EXTERN
WHITE BAL • AUTO • MANUAL • AWC-SET
DNR • LOW
• AUTO • OFF
• MIDDLE • HIGH
IMAGE
• SHARPNESS • GAMMA• COLOR GAIN
• MIRROR • FLIP • E. ZOOM
• ACE • DEFOG • PRIVACY
DIS • ON • OFF
MOTION • ON • OFF
SYSTEM
• COMM • MODE SEL • FRAME RATE
• RESET
• SYSTEM • LANGUAGE • CAM TITLE
• RETURNEXIT
Clinton Electronics Corp. HD Series PVMs User Manual 02
Settings can be adjusted using the built-in joystick (located on the back-side of the
PVM) or on older models can be adjusted with the button pad (located inside the
camera access door).
ACCESSING THE OSD
Button pad use:
Press the SET button to activate the OSD menu.
Joystick use:
Press the ‘IN’ on the joystick to activate the OSD menu.
Clinton Electronics Corp. HD Series PVMs User Manual
03
OSD MENU VARIATIONS
The OSD Menu varies slightly depending on the camera type. Certain menu option
shown in the manual may not be available or have fewer options on your camera.
MENU
ZOOMFOCUS
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
DIS
MOTION
SYSTEM
EXIT
DC
WDR
AUTO
MIDDLE
OFF
ON
MENU
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
DIS
MOTION
SYSTEM
EXIT
MANUAL
WDR
AUTO
MIDDLE
OFF
ON
10” PVMs with Fixed Lens:
21” ~ 43” with Autofocus Lens:
Additional ZOOMFOCUS menu.
Clinton Electronics Corp. HD Series PVMs User Manual 04
2. Scroll through menu items from the list available by using the UP or DOWN
buttons.
3. Use the LEFT or RIGHT buttons to change a setting.
4. When finished, select ‘EXIT’ and press IN on the joystick to save settings.
1. Press the IN on the joystick.
• Settings can only be changed when the OSD menu is displayed on the
monitor.
Select the
function using
the UP or DOWN
buttons.
When an arrow
is present, press
IN on the joystick
to enter the sub
menu.
Change the
setting using the
LEFT or RIGHT
buttons.
MENU
ZOOMFOCUS
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
DIS
MOTION
SYSTEM
EXIT
DC
WDR
AUTO
MIDDLE
OFF
ON
Notes
• An item with the icon also has sub menus. To select a sub menu, select an
item with the icon and press IN on the joystick.
• An item with the “ - - - ” icon is unavailable due to function settings.
• All menu items have a ‘RETURN’ option. With this function you have the option
to ‘RET’ (RETURN), which takes you back to the previous menu screen.
OSD MENU SETTINGS
Clinton Electronics Corp. HD Series PVMs User Manual
05
ZOOM FOCUS
This function is only available on camera models with motorized Zoom & Focus. Use the
options in this menu function to turn On/O Auto Focus, reset focus and turn On/O
Day Night Sync.
From the main menu, scroll to ZOOMFOCUS and press the joystick ‘IN’ to access
the sub-menu.
►AF MODE
Choose either AUTO or MANUAL focus.
• AUTO: The lens will focus automatically after zooming in/out.
• MANUAL: Allows for manual lens focus using the joystick.
►SCANNING
Choose either HALF or FULL scan for focusing during zoom adjustments.
• HALF: The lens scans only the current focal length, taking about 15 seconds.
• FULL: The lens scans the entire focal length, taking 30 seconds or longer.
CLINTON EXHD
ZOOMFOCUS
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
DIS
MOTION
SYSTEM
EXIT
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DC
OFF
EXTERN
AUTO
MIDDLE
OFF
OFF
ZOOMFOCUS
AF MODE
SCANNING
ONESHOT
SYNC TDN
LENSRESET
REFOCUS
RETURN
AUTO
HALF
ON
ON
ON
OFF
MENU
ZOOMFOCUS
LENS
EXPOSURE
BACKLIGHT
DAY&NIGHT
WHITE BAL
DNR
IMAGE
DIS
MOTION
SYSTEM
EXIT
DC
WDR
AUTO
MIDDLE
OFF
ON
• If Manual is the desired AF MODE; do not set SYNC TDN to ‘ON’– doing so will
refocus the camera at night, over-riding the manual focus selection.
Notes
Scanning Mode: Half Full
One Shot 5 seconds 15 seconds
Lens Reset 15 seconds 30 seconds
Table des matières
Autres manuels Clinton Electronics Moniteur
Clinton Electronics
Clinton Electronics CE-M21A-PIR Manuel
Clinton Electronics
Clinton Electronics Public View CE-M8SD-B Manuel utilisateur
Clinton Electronics
Clinton Electronics A-SERIES Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-M10A Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-M21PE Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-M19S Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-L07 Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-20DVRPVM-HD Manuel utilisateur
Clinton Electronics
Clinton Electronics CE-M27-HD-B Manuel utilisateur
Clinton Electronics
Clinton Electronics Public View CE-M19SD Manuel utilisateur
