Climax VDP-3 Manuel utilisateur

VDP-3

Video Door Phone

User Manual

June-10-2020

Table of Contents

INTRODUCTION______________________________________________________________________________ 2

1. APPLICATION OVERVIEW_______________________________________________________________ 3

1.1. PARTS IDENTIFICATION____________________________________________________________3

1.2. THE POWER SUPPLY _____________________________________________________________3

1.3. LED INDICATOR _________________________________________________________________4

1.4. EQUIPMENT REQUIRED ____________________________________________________________4

1.5. HARDWARE INSTALLATION _________________________________________________________5

1.6. SETUP ________________________________________________________________________6

2. OPERATION ____________________________________________________________________________ 9

2.1. WEB BROWSER ACCESS __________________________________________________________9

2.2. SMARTPHONE ACCESS___________________________________________________________10

2.3. DOORBELL NOTIFICATION_________________________________________________________12

2.4. VIDEO /PICTURE CAPTURE AND EVENT HISTORY________________________________________13

3. REMOTE PROGRAMMING_______________________________________________________________ 14

3.1. APP USER SETTING _____________________________________________________________14

3.2. ACCOUNT USER INFO ____________________________________________________________15

3.3. VIDEO SETTING ________________________________________________________________15

3.4. VDP SETTING _________________________________________________________________18

Introduction

VDP-3 Video Door Phone is designed to replace conventional doorbell by providing

remote video streaming access, two-way communication via Wi-Fi network. The Video

Door Phone functions as a part of Climax alarm system by connecting to a Climax

security system Control Panel. Setup and remote access of Video Door Phone is

performed via smartphone application developed by Climax Technology.

1.Application Overview

1.1. Parts Identification

Front View

(cover removed)

Back View

1. Protective Cover

2. Camera Lens

3. Function Button / LED Indicator (Blue / Amber)

4. IR Lens

5. Cover Fixing Screw

6. Mounting Hole

7. 12~24V DC/AC Power Input

Please note the torque on the screw should be less than 24.5 Nm (2.5 kg-m).

8. 12~24V DC/AC Power Input

Please note the torque on the screw should be less than 24.5 Nm (2.5 kg-m).

9. Reserved

10.Reserved

1.2. The Power Supply

The VDP uses 12~24V DC/AC power as its power source. Turn off mains power first.

Loosen the two screws of the 12~24V DC/AC Power Input, and save the screws for later

use. Connect wires to the inputs on the rear side of the back cover*; install the VDP to

power on the device.

*Note: It is recommended to use wire with a diameter less than 15mm to connect to the

power input. The torque on the screw should be less than 24.5 nm (2.5 kg-m).

1.3. LED Indicator

The Video Door Phone has built-in Blue and Red LEDs to indicate device status.

LED Color

Behavior

Indication

Blue

Flash every 3 seconds

VDP under Wi-Fi setup mode (AP mode)

Spinning

VDP button pressed, waiting for answer

VDP under video streaming and two-way

communication

Amber

ON for 3 seconds

VDP finish warm up upon power on,

entering normal operation.

Flash every 3 seconds

Wi-Fi connectivity problem*

Flash every second

VDP unable to connect to server

3 Flash then ON for 6

seconds

VDP reset to factory default

*Note: It takes about 1 minute for VDP to connect to Wi-Fi after power on. Before the

Wi-Fi connection is established, the Red LED may flash momentarily.

1.4. Equipment required

The following equipment is required to use VDP:

A router supporting 2.4 GHz Wi-Fi network. The VDP should be connected to this

router with access to internet and Home Portal Server.

An iPhone or Android smartphone

Android version requirement: Android 5.1 or above.

iPhone version requirement: iOS 9or above.

To use the VDP, a Climax IP based security system alarm panel is required –The

panel must be registered in Climax Home Portal Server with a valid user account.

Refer to panel and Home Portal Server user guide to complete panel setup and

registration process.

1.5. Hardware Installation

Step 1. Before you start, find the circuit breaker or fuse box.

Step 2. Once you have found it, open the door and turn off the main power switch.

Step 3. Take out the VDP from the package. Remove the protective cover and put it

aside for later use.

Step 4. Flip the VDP up-side-down and locate the 4 screws near the bottom of the VDP.

Step 5. Loosen the 2 screws of the 12~24V DC/AC Power Input, and save the screws

for later use.

Step 6. Connect wires to the inputs on the rear side of the back cover, as shown in

Figure 1. It is recommended to use wire with a diameter less than 15mm to

connect to the power input. Please note the torque on the screw should be less

than 24.5 nm (2.5 kg-m)

Step 7. Locate the 2 mounting holes on the VDP, as shown in Figure 2, and screw the

VDP into the wall.

Figure 1

Figure 2

Step 8. Replace the protective cover on top of the VDP and tighten the cover fixing

screw.

Step 9. Switch on the circuit breaker to provide power to the VDP.

1.6. Setup

The Video Door Phone can be incorporated into existing Climax security system as an

accessory device. To use the VDP, a Climax IP based security system alarm panel is

required.

In order to incorporate the Video Door Phone into existing Climax security system, the

Control Panel of the security system must be registered into Climax Home Portal Server

first with a functional user account.

A smartphone with Vesta Home 5 TW / Vesta Home 5 US or Vesta Home 5 EU app

installed is required to perform setup. Search for the app in Google Play or Apple App

Store, type Vesta Home 5 TW/US/EU on the search bar according to your server, then

download the application. Refer to Climax Home Portal Server user guide for detail.

1. Open Vesta Home 5 app and enter your existing user account & password of the

Control Panel you wish to use for further setup.

2. Tap the Camera icon in the navigation bar and the + icon on top left corner to add the

VDP into your existing system. Select the VDP icon and tap “Next”.

3. Power up the Video Doorbell by applying AC power. The device will first warm up for

about 30 seconds, and its Blue LED will begin to flash.

Flashing LED indicates the Video Doorbell does not have a working Wi-Fi setting yet.

It will enter Wi-Fi setup mode (AP mode) automatically upon power-up.

4. Select the route to set up your Wi-Fi network and follow on-screen instructions.

Please note if the VDP has already been set up to another Wi-Fi network, be sure to

reset the device first before adding it into your existing alarm system.

4.1. Manual: Use your VDP as an AP. Connect to your Wi-Fi. Make sure your

smartphone’s Wi-Fi is enabled. Follow on-screen instructions and wait for your

VDP to connect to your Wi-Fi network. After successfully joining to your Wi-Fi

network, the app proceeds to learn the VDP into the Control Panel. When

learning is completed, re-login to the app and start using your VDP.

4.2. QR Code: Enter your SSID information to generate QR Code for VDP to scan.

The QR Code includes information about the Wi-Fi network and the Control Panel.

Follow on-screen instructions. Tap “QR Code”for your smartphone to display it. VDP

will emit a short beep to indicate the scanning is successful. When the LED stops

flashing, tap “Done”to complete the setup. After VDP successfully joins to your Wi-Fi

network, the app will proceed to learn the VDP into the Control Panel. When learning

is completed, the VDP is able to be viewed on the app.

2.Operation

The Video Door Phone can be accessed by web browser and or smartphone application.

Two-way voice communication function is only available via smartphone access.

2.1. Web Browser Access

When accessing the Home Portal Server account of the Control Panel using a web

browser, VDP is located under the Camera page and has the same function of a Climax

IP Camera.

Two-way voice and doorbell functions are not enabled for web browser access. To uses

these functions, a smartphone app is required. Please see 22. Smartphone Access for

detail.

Click the Setting button to access video adjustment and timestamp location

setting. Adjust the setting and click Submit to confirm.

Press the Record Video button to record a video clip.

Table des matières

Autres manuels Climax Système d'interphone

Climax

Climax Vesta Series Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur