CLF Lighting Aorun Manuel utilisateur

manual

V2.0 MARCH 2018WWW.CLF-LIGHTING.COM

aorun

WWW.CLF-LIGHTING.COM

Dimensions 2

Safety instruction 5

Physical installation 6

Control panel 8

Menu navigation 9

DMX Protocols 12

DMX protocol CH14 12

DMX protocol CH16 15

DMX protocol CH16 PLUS 18

Cleaning and maintanances 21

Troubleshooting 21

Circuit connection diagram 22

Specications 23

Included items 24

table of CONTENTS

1.0

WWW.CLF-LIGHTING.COM

2.0

Dimensions

All dimensions are in millimeters

275

380

280

380

275

280

120

529

424

529

424

120

188

483

377

336

188

336

483

377

φ\f@??|b0|i0|c0|p2;155

334.8188±0.0100

380

335

235

155

380

275

280

335

235

188

336

377

483

120

424

529

OPTIONAL HANGING BRACKET

ART. NO. 160022

WWW.CLF-LIGHTING.COM

Safety Instruction

The following symbols are used to identify important safety information on the product and in this manual:

WARNING!

Read the safety precautions in this section before

installing, powering, operating or servicing this

product

DANGER!

Safety hazard.

Risk of severe

injury or death.

DANGER!

Hazardous

voltage. Risk of

lethal or severe

electric shock.

WARNING!

Fire hazard.

WARNING!

LED light

emission. Risk of

eye injury.

WARNING!

Burn hazard. Hot

surface. Do not

touch.

WARNING!

Wear protective

eyewear.

WARNING!

Referto user

manual.

INSTALLATION

Make sure all (mounting) parts of the fixture are in a good state.

Make sure the point of attachment is stable before positioning the fixture.

The safety chain must be properly hooked on to the safety attachment point. If the safety chain gets

worn out, it needs to be replaced.

MINIMUM DISTANCE OF ILLUMINA TED OBJECTS

The fixture must be positioned so that the objects within the reach

of the beam are at least 12 metres from the lens of the fixture.

MINIMUM DISTANCE FROM FLAMMABLE MATERIALS

The fixture must be positioned so that any flammable materials are

at a distance of at least 0.2 metres from every point on the surface of the fitting.

MOUNTING SURFACES

Do not mount the fixture on flammable surfaces.

MAXIMUM AMBIENT TEMPERATURE

Stop using the fixture when the ambient temperature (Ta) exceeds 35°C.

3.0

WWW.CLF-LIGHTING.COM

4.0

Safety Instruction

WWW.CLF-LIGHTING.COM

RNING!

e safety precautions in this section before

ng, powering, operating or servicing this

PROTECTION AGAINST ELECTRICAL SHOCK

The connection must be made with a power supply system including efficient earthing (Class I appliance according to

standard EN 60598-1). It is important to protect the supply lines of the fuxture from indirect contact and/or shorting to

earth by using appropriately sized residual current devices.

CONNECTION TO MAIN SUPPLY

Connection to the electricity main supply must be carried out by a qualified electrical installer. Check if the main

frequency and voltage corresponds with the values of the fixture as described on the fixture electrical data label.

This label also provides you the maximum number of fixtures to connect to the main supply in order to

avoid overloading. Do not use the power cable when the insulation is damaged. The damaged cable must be

repaired by the manufacturer or the distributor in order to avoid any dangerous situations.

TEMPERATURE OF THE EXTERNAL SURFACE

The maximum temperature that can be reached on the external surface of the fixture, in a thermally steady state, is 100°C.

MAINTENANCE

Before starting any maintenance or cleaning work on the fixture, cut off the power from the main power supply.

After switching off the power, do not remove any parts of the fixture, for at least 30 minutes to avoid any burns.

The fixture is designed to hold any splinters when the lamp explodes. The lenses must be mounted properly,

and when damaged, the lenses must be replaced with proper spare parts.

RNING!

e safety precautons in this section before

ng, powering, operating or serviing this

roduct

LAMP

Carefully read the "operating instructions" provided by the lamp manufacturer and immediately replace the lamp

when damaged or deformed by heat.

BATTERY

This product contains a rechargeable lead-acid battery. To preserve the environment, please dispose the battery

at the end of its life according to the applied regulation.

The products referred to in this manual conform to the European Community Directives to which they are subject:

• Low Voltage 2014/35/EU

• Electromagnetic Compatibility 2014/30/EU

WWW.CLF-LIGHTING.COM

5.0

WWW.CLF-LIGHTING.COM

AORUN PHOTOMETRICS

WWW.CLF-LIGHTING.COM

6.0

physical installation

WWW.CLF-LIGHTING.COM

aorun

nuroa

Installing the fixture - Fig. 3

The fixture can be installed on the floor resting on a special rubber feet or on a truss.

WARNING: When the fixture is positioned on truss, the safety rope must be fitted. This must be securely fixed to the

support structure of the fixture and then connected to the fixing point at the centre of the base.

The xture can be installed on the oor resting on the special rubber feet or on a truss.

WARNING: When the xture is positioned on truss, the safety rope must be tted. This must be securely xed to the support structure of the

xture and then connected to the xing point at the centre of the base.

WWW.CLF-LIGHTING.COM

7.0

● Not more then 4 xtures in a series.

● Connection to the mains must be carried out by a qualied electrical installer.

out power endin in

The L terminal is connected with the brown line.

The N terminal is connected with the blue line.

NGround

WWW.CLF-LIGHTING.COM

8.0

WWW.CLF-LIGHTING.COM

11.0

Test

AORUN

Test

AORUN

• Please use the round 3 or 5-pin XLR plugs & sockets o󰀨ered by the manufacturer to connect the rst output to the second input and

connect the second xture’s output to the third xture’s input. And in the same way for the rest. Connect the rst xture to a DMX controller.

• It is recommended to use a DMX signal terminator for the installation to avoid the electronic noise damage the digital control signal. The

DMX terminator is an XLR connector with a 120 1/2W resistor connected across pin 2 and 3. Which is then plugged into the output socket

on the last projector in the chain refer to the connection.

control panel

WWW.CLF-LIGHTING.COM

11.0

Test

AORUN

Test

AORUN

WWW.CLF-LIGHTING.COM

menu navigation

9.0

MAIN MENU MENU I MENU II MENU III

DMX address Address: 001 - 512

Information

Lamp hours

Total: ****(h)

Lamp open: ****(h)

Temperatuur Board: 000.0

RDM UID Undistributed

MOTOR UID

Fan speed / voltage

Fan 1: 00.0V

Fan 2: 00.0V

Fan 1: 0000 RPM

Fan 2: 0000 RPM

Fan3: 0000 RPM

DMX live

1. Color (***)

2. Shutter (***)

3. Dimmer (***)

4. Gobo (***)

5. Prism (***)

6. Prism ROTA (***)

7. Prism Macro (***)

8. Frost (***)

9. Focus (***)

10. Pan (***)

11. Pan ne (***)

12. Tilt (***)

13. Tilt ne (***)

14. Function (***)

15. Reset (***)

16. Lamp control (***)

System version

XY: V*.**

10M: V*.**

DIS board: V*.**

Return (ESC)

Personal

Channel mode

Simple (14 CH)

Standard (16 CH)

16CH PLUS (16+ CH) Additions to 16 CH; Slow - Fast rotation,

Fast - Slow rotation & stop

Auto lamp on

OFF

P/T invert

Pan invert

OFF

Tilt invert

OFF

Table des matières

Autres manuels CLF Lighting Matériel de DJ

CLF Lighting

CLF Lighting Serius Manuel utilisateur

CLF Lighting

CLF Lighting LED FAN Manuel utilisateur

CLF Lighting

CLF Lighting HERA Manuel utilisateur

CLF Lighting

CLF Lighting Apollo Manuel utilisateur

CLF Lighting

CLF Lighting SPECTRUM P2 VARI-WHITE Manuel utilisateur

CLF Lighting

CLF Lighting Orion Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur