CleverMic SDI Series Manuel utilisateur
CleverMic PTZ Camera
User Manual
Attentions
This manual details functions, installation, operation principles and methods
of teacher tracking camera. Please read this manual carefully before installation
and use.
1．How to use
In order to prevent this product or products connected to it from being
damaged, please use it within its prescribed scope of use.
1)Keep the device from rain or moisture;
2)To prevent electric shock, do not open the main case; only qualified
technicians are allowed to install or maintain the device;
3)Do not use the device beyond scope of its temperature, humidity or power
supply specification;
4)When cleaning the camera lens, swipe it with dry soft cloth. If dirt is hard to
be removed, please swipe clean gently with mild detergent. Do not use strong or
corrosive detergent, for it may scratch the lens and thus affect image result;
2．Electrical safety
Installation and use of this product shall be in strict accordance with safety
standards for electricity.
3．Careful handing
Avoid damage to product caused by heavy pressure, strong vibration or
immersion during transportation, storage and installation.
4．Power supply polarity
This product applies DC 12V power supply. Power plug polarity is shown as
follows:
5．Install with caution
1)Do not rotate the camera head violently, otherwise it may cause mechanical
malfunction;
2)This product should be placed on a stable desktop or other horizontal surfaces.
Do not install the product obliquely, otherwise it may display inclined image;
3)When installing the camera on TV or personal computer, use four double
faced adhesive pads at the bottom for fixing;
4)This product shell is made of organic materials. Do not expose it to any liquid,
gas or solids which may corrode the shell.
5)During installation, ensure that there are no obstacles within rotation range of
the holder;
6)Do not power on before finishing installation;
6．Do not dismantle the product without permission
This product contains no parts which can be maintained by users. Any damage
arising from dismantling the product by user without permission will not be included
in warranty.
7．Magnetic field interference
Magnetic field under specific frequency may affect this product image; this is
Class A product. Application in domestic environment may cause radio interference.
Therefore, user should take corresponding measures.
Content
1. FAST INSTALLATION..............................................................................................................................3
1.1 CAMERA INTERFACE EXPLANATION............................................................................................4
1.2 POWER-ON INITIAL CONFIGURATION.........................................................................................4
1.3 VIDEO OUTPUT.............................................................................................................................4
2. PRODUCT OVERVIEW............................................................................................................................6
2.1 PRODUCT INTRODUCTION...........................................................................................................6
2.1.1 PRODUCT MODEL..............................................................................................................6
2.1.2 DIMENSION.......................................................................................................................6
2.1.3 ACCESSORY........................................................................................................................7
2.2 MAIN FEATURES...........................................................................................................................8
2.2.1 CAMERA PERFORMANCE..................................................................................................8
2.2.2 NETWORK PERFORMANCE...............................................................................................8
2.3 TECHNICAL SPECIFICATION..........................................................................................................8
2.4 INTERFACE INSTRUCTION...........................................................................................................10
2.4.1 EXTERNAL INTERFACE......................................................................................................10
2.4.2 BOTTOM DIAL SWITCH....................................................................................................10
2.4.3 RS-232 INTERFACE...........................................................................................................12
3. APPLICATION INSTRUCTION................................................................................................................13
3.1 VIDEO OUTPUT...........................................................................................................................13
3.1.1 POWER-ON INITIAL CONFIGURATION.............................................................................13
3.1.2 VIDEO OUTPUT................................................................................................................13
3.2 REMOTE CONTROLLER...............................................................................................................14
3.2.1 KEYS INTRODUCTION......................................................................................................15
3.2.2 APPLICATIONS.................................................................................................................15
3.3 MENU SETTING..........................................................................................................................16
3.3.1 MAIN MENU....................................................................................................................16
3.3.2 SYSTEM SETTING.............................................................................................................17
3.3.3 CAMERA SETTING...........................................................................................................17
3.3.4 P/T/Z...............................................................................................................................20
3.3.5 VIDEO FORMAT...............................................................................................................20
3.3.6 VERSION..........................................................................................................................21
3.3.7 RESTORE DEFAULT............................................................................................................21
4. NETWORK CONNECTION.....................................................................................................................22
4.1 CONNECTING MODE..................................................................................................................22
4.2 IE LOG IN....................................................................................................................................25
4.2.1 WEB CLIENT....................................................................................................................25
4.2.2 PREVIEW.........................................................................................................................25
4.2.3 PLAYBACK.......................................................................................................................25
4.2.4 CONFIGURATION...........................................................................................................25
4.2.5 VIDEO CONFIGURATION................................................................................................26
4.2.6 NETWORK CONFIGURATION..........................................................................................28
4.2.7 SYSTEM CONFIGURATION.............................................................................................28
4.2.8 LOGOUT........................................................................................................................29
4.2.9 WIRELESS NETWORK....................................................................................................29
5. SERIAL COMMUNICATION CONTROL...............................................................................................30
5.1 VISCA PROTOCOL LIST..............................................................................................................30
5.1.1 CAMERA RETURN COMMAND......................................................................................30
5.1.2 CAMERA CONTROL COMMAND....................................................................................30
5.1.3 INQUIRY COMMAND.....................................................................................................33
5.2 PELCO-D PROTOCOL COMMAND LIST......................................................................................34
5.3 PELCO-P PROTOCOL COMMAND LIST.......................................................................................35
6. CAMERA MAINTENANCE AND TROUBLESHOOTING.........................................................................35
6.1 CAMERA MAINTENANCE..........................................................................................................35
6.2 TROUBLESHOOTING...............................................................................................................…36
1. Fast Installation
1.1 Camera Interface Explanation
Photo 1.1 Interface of SDI Model
Interface of SDI Model：
1、Camera Lens 4、Locating Hole 7、SDI Interface
2、Remote Controller Receiver
Light
5、RS232 Control Interface (input ) 8、A-IN Interface
3、Tripod Screw Hole 6、LAN Interface 9、DC12V Input Power Supply Socket
Photo 1.2 Interface of HDMI Model
Interface of HDMI Model：
1、Camera Lens 4、Locating Hole 7、SDI Interface
2、Remote Controller Receiver
Light
5、RS232 Control Interface (input ) 8、A-IN Interface
3、Tripod Screw Hole 6、LAN Interface 9、DC12V Input Power Supply Socket
Photo 1.3 Interface of U3+HDMI Model
Interface of U3+HDMI Model：
1、Camera Lens 4、Locating Hole 7、HDMI Interface
2、Remote Controller Receiver Light 5、RS232 Control Interface (input ) 8、USB3.0 Interface
3、Tripod Screw Hole 6、LAN Interface 9、DC12V Input Power Supply
Socket
Photo 1.4 Interface of U2 Model
Interface of U2 Model：
1、Camera Lens 4、Locating Hole 7、USB2.0 Interface
2、Remote Controller Receiver
Light
5、RS232 Control Interface (input ) 8、DC12V Input Power Supply Socket
3、Tripod Screw Hole 6、LAN Interface
Photo 1.6 Interface of U3 Model
Interface of U3 Model：
1、Camera Lens 4、Locating Hole 7、USB3.0 Interface
2、Remote Controller Receiver Ligh 5、RS232 Control Interface (input ) 8、DC12V Input Power Supply Socket
3、Tripod Screw Hol 6、LAN Interface
Notice：SDI Model come with SDI Interface，HDMI Model has HDMI Interface，U3+HDMI
Model including USB3.0 and HDMI Interface，U2 Model has USB2.0 Interface，HD Model has HD
BaseT Interface，U3 Model has USB3.0 Interfadce, Users should read the manual according to
the special model.
1.2 Power on initial configuration
1) Power on: Connect DC12V power supply adapter with power supply socket.
2)Initial configuration: Power on with power indicator light on and remote control receiver light blinking, camera
head moves from bottom left to the bottom, and then goes to the HOME position (intermediate position of both
horizontal and vertical ),while the camera module stretches. When remote control receiver light stops blinking,
the self-checking is finished.
Note:
1. The default address of the remote controller is the 1# address.
2. If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0
position.
1.3 Video Output
This series has a variety of video output; SDI models have video output from LAN, SDI. HDMI models have video
output from LAN, HDMI. U3+HDMI models have video output from LAN, HDMI, USB3.0, which is compatible with
USB2.0. U2 models have video output from LAN, USB2.0. HD models from LAN. U3 models have video output
from LAN, USB3.0, which is compatible with USB2.0.
1) Video Output from LAN
a. Network Cable Connection Port: SDI Model--No.6 in Figure1.1; HDMI Model--No. 6 in Figure1.2; U3+HDMI
Model--No.6 in Figure 1.3; U2 Model--No. 6 in Figure1.4; U3 Model--No. 6 in Figure1.6.
b. Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter
to enter into the login page; click on the “player is not installed, please download and install!" and follow the
installation steps for installation. Then enter the user name admin and password admin (factory default);
press Enter to enter into the preview page, users can carry out PTZ control, video recording, playback,
configuration and other operations.
2) HDMI Video Output
a. HDMI Video Cable Connection: HDMI models refer to No.7 in Figure1.2; U3+HDMI models refer to No.7 in
Figure1.3.
b. Connect the camera and the monitor via HDMII video cable; video output is available after camera self-test.
3) SDI Video Output
a. SDI video cable connection: SDI models refer to No.7 in Figure1.1
b. Connect the camera and the monitor via SDI video cable; video output is available after camera self-test.
USB3.0 video output
a. USB3.0 video cable connection: U3+HDMI models refer to NO.8 in figure1.3; U3 models refer to NO.7 in
figure1.6.
b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image
device, and then video output will be available.
5) USB3.0 compatible with USB2.0 output
a. USB3.0 video cable connection: U3+HDMI models refer to NO.7 in Figure1. 3; U3 models refer to NO.7 in
figure1.6.
b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image
device, and then video output will be available.
6) USB2.0 video output
a. USB2.0 video cable connection: U2 models refer to NO.7 in Figure1. 3.
b. Connect the camera and the monitor via USB2.0 video cable, open video display software, select image
device, and then video output will be available.
Note: USB2.0 output and USB3.0 output is the same interface.
1.4 Bracket mount
Note: Bracket can only be wall mounted or upside down mounted on template and concrete wall, but can not be
installed on plasterboard.
1) Wall mount step
Ce manuel convient aux modèles suivants
14
Table des matières
Autres manuels CleverMic Caméra de sécurité
CleverMic
CleverMic 1030U2HS-NDI Manuel utilisateur
CleverMic
CleverMic 1220SHN Manuel utilisateur
CleverMic
CleverMic 4035UHS Manuel utilisateur
CleverMic
CleverMic 300-U3S Manuel utilisateur
CleverMic
CleverMic 1212SHN Manuel utilisateur
CleverMic
CleverMic Pro HD PTZ HUSL20 Manuel utilisateur
CleverMic
CleverMic 300-U3S Manuel utilisateur
CleverMic
CleverMic 1212UHN Manuel utilisateur
