Cleco Tools 19P Series Manuel utilisateur
For additional product information visit our website at http://www.ClecoTools.com
Instruction Manual
PL12-1012EN
06/18/2019
19P & 19PT Series
Pistol Grip Screwdriver
For additional product information visit our website at http://www.ClecoTools.com
19P Series
19T Series
Page 2
PL12-1012EN
06/18/2019
Cleco®
General Information
For this Instruction Manual
This Instruction Manual is the Original Instruction Manual intended for all persons who will operate and maintain
these tools.
This Instruction Manual
• provides important notes for the safe and ecient use of these tools.
• describes the function and operation of the 19P and 19T series tools.
• serves as a reference guide for technical data, service intervals and spare parts ordering.
• provides information on optional equipment.
Identication text:
19P / 19T represents all models of the pistol grip pneumatic screwdrivers as described in this manual
Ú indicates a required action
• indicates a list
<..> indicates a reference number from the exploded parts drawings
Arial indicates an important feature or instruction written in Arial Bold
Identication graphic:
¢indicates a directional movement
òindicates a function or force
Copyright protection:
Apex Tool Group, LLC reserves the right to modify, supplement or improve this document or the product without
prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied
to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or
otherwise without the express permission of Apex Tool Group, LLC.
Page 3
PL12-1012EN
06/18/2019
Cleco®
Nomenclature
19 X X A XX Q
Tool Series
19
Handle
P = Pistol Grip P-Handle
T = Pistol Grip T-Handle
Tool Type
C = Combination (Trigger/Push-To-Start)
T = Trigger
Clutch
A = Clecomatic Clutch
Maximum Torque
02 = 2.1 Nm 06 = 5.1 Nm
03 = 2.9 Nm 07 = 6.8 Nm
04 = 4.5 Nm 09 = 8.9 Nm
05 = 5.1 Nm 15 = 14.7 Nm
Output Drive
Q = Quick Change Chuck
Page 4
PL12-1012EN
06/18/2019
Cleco®
Contents
1 Safety 6
1.1 Warning and notes................................................................................................. 6
1.2 Basic requirements for safe working practices ...................................................... 7
1.3 Operator training.................................................................................................... 7
1.4 Personal protective equipment .............................................................................. 7
1.5 Designated use...................................................................................................... 8
1.6 Codes and standards ............................................................................................ 8
1.7 Noise and vibration................................................................................................ 8
2 Scope of supply, transport and storage 9
2.1 Items supplied ....................................................................................................... 9
2.2 Transport ............................................................................................................... 9
2.3 Storage ..................................................................................................................9
3 Product description 10
3.1 General description ............................................................................................. 10
3.2 Operation and functional elements...................................................................... 10
4 Accessories 11
5 Before initial operation 12
5.1 Ambient conditions .............................................................................................. 12
5.2 Air supply............................................................................................................. 12
5.3 Connecting the air supply to the tool ................................................................... 12
5.4 Tool set up ........................................................................................................... 13
5.4.1 Setting the torque ................................................................................................ 13
6 First operation 14
6.1 Puting into use..................................................................................................... 14
7 Troubleshooting 15
8 Maintenance 16
8.1 Service schedule ................................................................................................. 16
8.1.1 Calculating a customer specic maintenance plan.............................................. 17
8.2 Lubricants ............................................................................................................17
9 Repair instructions 18
9.1 Motor disassembly and reassembly .................................................................... 18
9.2 Trip rod sizing ...................................................................................................... 19
Page 5
PL12-1012EN
06/18/2019
Cleco®
Contents
10 Spare parts
10.1 19P series screwdriver ........................................................................................ 20
10.2 19T series screwdriver ........................................................................................ 22
10.3 Motor assembly ................................................................................................... 24
10.4 301967PT Gearing assembly .............................................................................. 26
10.5 301086 Gearing assembly................................................................................... 26
10.6 301968PT Gearing assembly .............................................................................. 28
10.7 301969PT Gearing assembly .............................................................................. 28
10.8 302016PT Gearing assembly .............................................................................. 30
10.9 301970PT Gearing assembly .............................................................................. 32
10.10 301991PT Clecomatic clutch assembly............................................................... 34
301979PT Clecomatic clutch assembly............................................................... 34
10.11 302017PT Clecomatic clutch assembly............................................................... 36
10.12 301981PT Clecomatic clutch assembly............................................................... 38
10.13 301124 Output gear assembly............................................................................. 40
10.14 301122 Output spindle assembly ........................................................................ 40
11 Technical data 42
11.1 19PCA and 19TCA Specications ....................................................................... 42
11.2 19PTA and 19TTA Specications......................................................................... 42
12 Service 43
12.1 Replacement parts .............................................................................................. 43
12.2 Tool repairs .......................................................................................................... 43
12.3 Warranty repairs .................................................................................................. 43
13 Disposal 44
Page 6
PL12-1012EN
06/18/2019
Cleco®
Safety
1 Safety
1.1 Warnings and notes
Warning notes are identied by a signal word and a pictogram.
• The signal word indicates the severity and probability of the impending danger.
• The pictogram indicates the type of danger.
---------------------------------------------------------------------------------------------------------------------------------------
WARNING identies a potentially hazardous situation which, if not avoided, may result in serious
injury.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
CAUTION identies a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or property and environmental damage.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
NOTE identies general information which may include application tips or useful information but no
hazardous situations.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
Important information that must be read and understood by all personnel installing, operating or
maintaining this equipment.
---------------------------------------------------------------------------------------------------------------------------------------
Page 7
PL12-1012EN
06/18/2019
Cleco®
Safety
1.2 Basic requirements for safe working practices
All personnel involved with the installation, operation or maintenance of these tools must read and
understand all safety instructions contained in this manual. Failure to comply with these instructions
could result in serious injury or property damage.
These safety instructions are not intended to be all inclusive. Study and comply with all applicable
National, State and Local regulations.
---------------------------------------------------------------------------------------------------------------------------------------
Work Area:
ÚEnsure there is enough space in the work area.
ÚKeep the work area clean.
ÚKeep the work area well ventilated.
Personnel Safety:
ÚInspect the air supply hoses and ttings. Do not use damaged, frayed or deteriorated hoses.
ÚMake sure the air supply hose is securely attached to the tool.
ÚEnsure a secure standing position and maintain balance.
ÚMake sure the throttle is positioned relative to the head so the throttle will not become wedged
against an adjacent object in the ON position due to torque reaction.
ÚIf the tool is to be reversed, locate the throttle in a neutral position to prevent entrapment.
ÚKeep the tool clean and dry to provide the best possible grip.
ÚFirmly grasp the handle of the 19P/19T and apply the bit to the application before starting.
ÚBe prepared for high short-term reaction torques.
Safety working with and around fastening tools:
ÚUse only power tool sockets and bits available from Apex Tool Group.
ÚInspect socket or bit for visible damage and cracks. Replace damaged items immediately.
ÚDisconnect the air supply before installing or replacing the socket or bit.
ÚDo not attach the socket or bit at a slant.
ÚMake sure the socket or bit is fully assembled on the drive and locked in postion.
---------------------------------------------------------------------------------------------------------------------------------------
1.3 Operator training
All personnel must be properly trained before operating the 19P/19T tools. The 19P/19T tools are to be
repaired by fully trained personnel only.
1.4 Personal protective equipment
When working
• Wear eye protection to protect against ying metal splinters.
• Wear hearing protection
Danger of injury by being caught by moving equipment.
• Wear a hairnet
• Wear close tting clothing
• Do not wear jewelry
Page 8
PL12-1012EN
06/18/2019
Cleco®
Safety
1.5 Designated use
The 19P/19T are designed exclusively for fastening and releasing threaded fasteners.
The 19P/19T series screwdrivers are equipped with an adjustable Clecomatic clutch. The tool will shut
o the instant the clutch reaches its adjustable preset torque. This action provides an accurate method
of controlling torque without sacricing tool speed.
• Do not modify the 19P/19T, any guard or accessory.
• Use only with accessory parts which are approved by the manufacturer.
• Do not use as a hammer, pry-bar or any other improper usage.
1.6 Codes and standards
It is mandatory that all national, state and local codes and standards be followed.
1.7 Noise and vibration
Noise level ≤ 79 dB(A) free speed (without load) according to ISO 12100: 2011
Vibration values < 2.5 m/s2 according to ISO 12100: 2011
Page 9
PL12-1012EN
06/18/2019
2 Scope of supply, transport and storage
2.1 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1 19P or 19T
1 PL12-1012EN instruction manual
1 Declaration of Conformity
1 Lubrication sheet
1 Warranty statement
2.2 Transport
Transport and store the 19P/19T in the original packaging. The packaging is recyclable.
2.3 Storage
For short term storage (less than 2 hours) and protection against damage:
ÚPlace the 19P/19T in a location on the workbench to avoid accidental depression of the trigger.
or
ÚSuspend the 19P/19T from a suitable balancer or tool positioner.
For storage longer than 2 hours:
ÚDisconnect the air supply from the 19P/19T
Cleco®
Scope of Supply, Transport and Storage
Object Time Period Storage Temperature
19P without air supply No guideline -13°F to 104°F (-25°C to 40°C)
19T without air supply No guideline -13°F to 104°F (-25°C to 40°C)
Page 10
PL12-1012EN
06/18/2019
Cleco®
Product Description
3 Product description
3.1 General description
• Pistol grip or “T” handle pneumatic powered screwdriver
• Trigger actuated
• Clockwise/counterclockwise rotation
• 19PCA and 19TCA models: trigger allowed push-to-start with adjustable Clecomatic clutch
19PTA and 19TTA models: trigger start with adjustable Clecomatic clutch
• Low vibration level
3.2 Operation and functional elements
This section describes the operational and functional elements of the 19P/19T.
7
3
5 6
1
2
Ref. Description
1 Air Inlet
2 Adjustable Reversing Lever
3 Trigger
4 Two Interchangeable soft-touch grip sizes
5 Clecomatic Clutch
6 Motor and Gearing
7 Quick Change Chuck
4
Ce manuel convient aux modèles suivants
1
Table des matières
