Clearly Hearing SmartAid Manuel utilisateur
The SmartAid
User Instructions
1
Thank you for choosing Clearly Hearing. At Clearly Hearing we
are proud to provide you with excellent hearing aids as well as the
best after sales service in the industry.
If you have any technical questions please do not hesitate to
contact our customer service department by live chat through our
website at www.clearlyhearing.com.
or by telephone at 1-855-263-4327.
This manual will help you understand how to get the most from
your SmartAid. Please read it carefully and take it as your
operating guide.
2
Table of Contents
Turning the SmartAid Off and On!5
Adjustment of Volume!6
Battery Information!8
How to Fit the SmartAid to your ear.!9
Removing the SmartAid!13
In Case of Malfunction!14
Important Notes!15
Storing and Caring for Your SmartAid!16
Cleaning The SmartAid!17
Only one way to hear better!18
Trouble Shooting Guide!19
3
Your Clearly Hearing Aid is a very intricate, highly precise
electronic unit. It has been carefully designed to withstand years
of wearing under varying conditions. However, your hearing aid
may be damaged if exposed to extreme conditions, severe blows,
or general neglect.
To get full satisfaction from the quality and the performance we
have built into your SmartAid, please handle it with care. Always
read the instructions carefully.
At the back of this manual you will find a troubleshooting guide.
This will help you in situations where your hearing aid does not
perform according to your expectations.
We want you to be very happy with Clearly Hearing and our
products. If we can ever offer after sales support, please do not
hesitate to contact us.
4
Turning the SmartAid Off and On
The battery door functions as the on and off switch. The hearing
aid is turned on when the door is closed and a battery is inserted.
It is also turned off when the door is opened. You can keep the
battery in the door when the hearing aid is turned off.
Please remember to open the battery door when the hearing aid
is not in use. This will help to extend the life of the battery.
Remove the battery completely if the hearing aid will not be used
again soon.
5
Adjustment of Volume
Your Clearly Hearing SmartAid comes equipped with a volume
control. You can fine tune the volume to make it more
comfortable when needed.
Rotate the volume control wheel upwards to raise the volume.
Rotate it downwards to lower the volume.
The wheel indication value is from 1 to 4. The number 1
represents the quietest setting on the hearing aid. The number 4
represents the loudest.
NOTE:
The SmartAid is a very powerful hearing device. Avoid prolonged
use at uncomfortably loud levels. This may damage your hearing.
For further information on this please consult our hearing
professionals.
6
Changing the Battery
Please remove the small adhesive tab on the battery BEFORE
inserting the battery into the hearing aid. Do not use batteries on
which there is a sticky residue from the tab. Also, do not use any
battery that is oxidizing or rusting. These can all potentially
damage the hearing device and also clog the tiny air holes
required for the battery to function.
There is a small edge on the battery door that you can use your
finger to flip open the battery door.
The battery must be placed with the plus side (+) in accordance
with the plus sign (+) on the battery door. The battery door will
close easily when the battery is inserted properly.
When changing batteries please make sure to hold the hearing
aid over a table or a carpet. This will make it easier to find a
dropped hearing aid or battery.
Your SmartAid takes a #13 battery.
Additional batteries can be purchased on our website. We
sell cartons of 40 premium batteries for $29.00.
7
Battery Information
Never leave an exhausted battery in the hearing aid. They may
leak and cause damage to the device.
The SmartAid uses a size 13 Zinc Air battery. This is a battery
that provides stable power to the device until it is exhausted.
Please note the expiry date on the battery pack stating how long
the batteries will be good for. DO NOT remove the adhesive tabs
on the individual batteries until just before they are used.
Removing this tab will allow the battery to activate and the battery
life will immediately start draining. Always operate your hearing
aid with the same battery until that battery is exhausted.
The lifetime of the battery depends on a number of factors.
These factors include how loud the hearing aid is set during use,
how loud the environments are, and the number of hours the
hearing aid is worn.
In rare cases a new battery may be exhausted right out of a new
package. This can happen if the adhesive tab was not properly
placed. If your hearing aid does not work after you have inserted
a new battery, try inserting another one.
8
How to size the tubing & fit the SmartAid to your ear.
Step 1. Place the SmartAid over your ear
Step 2. Pick out an ear bud that will comfortably fit your ear canal
Step 3. Attach the earbud to the tube.
9
Step 4. Place the ear tube and bud into your ear beside your SmartAid
Step 5. Trim the tube to fit your ear
10
Autres manuels pour SmartAid
1
Table des matières
Autres manuels Clearly Hearing Prothèse auditive
Manuels Prothèse auditive populaires d'autres marques
Advanced Bionics
Advanced Bionics Slim HP Standard Manuel utilisateur
Widex
Widex DREAM440 THE DREAM SERIES Manuel utilisateur
Phonak
Phonak myPilot Manuel utilisateur
NIKEN
NIKEN NK-401 Manuel utilisateur
ON Semiconductor
ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur
Sonetik
Sonetik GOHEAR Manuel utilisateur